OID reference
1.3.6.1.4.1.171.11.69.3.3.2.5.1.6
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) ¡V If this value is written to the object, the corresponding entry will be removed from the table. Valid (3) - This en…
Identification
{1 3 6 1 4 1 171 11 69 3 3 2 5 1 6}
| Value | Name |
|---|---|
| 1 | other |
| 2 | invalid |
| 3 | valid |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DES3828P-SWL3MGMT-MIB, the row index consists of these components in order:
swL3IpStaticRouteDest (IpAddress): four numeric subidentifiers, one per IPv4 address octet.swL3IpStaticRouteMask (IpAddress): four numeric subidentifiers, one per IPv4 address octet.swL3IpStaticRouteBkupState (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.11.69.3.3.2.5.1.6.<swL3IpStaticRouteDest: four octets>.<swL3IpStaticRouteMask: four octets>.<swL3IpStaticRouteBkupState>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.69.3.3.2.5.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swL3IpStaticRouteStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
valid(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other (1) - This entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid (2) ¡V If this value is written to the object, the
corresponding entry will be removed from the table.
Valid (3) - This entry will reside in the table."
::= { swL3IpStaticRouteEntry 6 }swL3IpStaticRouteStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
valid(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid(2) - writing this value to the object, and then the
corresponding entry will be removed from the table.
valid(3) - this entry is reside in the table."
::= { swL3IpStaticRouteEntry 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) ¡V If this value is written to the object, the corresponding entry will be removed from the table. Valid (3) - This entry will reside in the table.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swL3IpStaticRouteStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3IpStaticRouteStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"invalid",
"(",
"2",
")",
",",
"valid",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) ¡V If this value is written to the object, the corresponding entry will be removed from the table. Valid (3) - This entry will reside in the table.\"",
"::=",
"{",
"swL3IpStaticRouteEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"invalid",
2
],
[
"valid",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) ¡V If this value is written to the object, the corresponding entry will be removed from the table. Valid (3) - This entry will reside in the table."
],
null,
null,
null,
null
]
}Module: DES3828P-SWL3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Same file in DES-3800_v4.50.B12.mib.zip.
Same file in DES-3800_v4.50.B12.mib.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DES3828P-SWL3MGMT-MIB
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Status in source: current.
Names: swL3IpStaticRouteStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3IpStaticRouteStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"invalid",
"(",
"2",
")",
",",
"valid",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table.\"",
"::=",
"{",
"swL3IpStaticRouteEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"invalid",
2
],
[
"valid",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table."
],
null,
null,
null,
null
]
}Module: DES3828P-L3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Module: DES3828P-L3MGMT-MIB
{'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Module: DES3828P-L3MGMT-MIB
{'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32'], 'SW3800PRIMGMT-MIB': ['des3828P']}Related source files and packages:
Same file in DES3852R2_2-00-B16-MIB.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.69.3.3.2.5.1.1 | swL3IpStaticRouteDest | 0 | 0 | |
| 1.3.6.1.4.1.171.11.69.3.3.2.5.1.2 | swL3IpStaticRouteMask | 0 | 0 | |
| 1.3.6.1.4.1.171.11.69.3.3.2.5.1.3 | swL3IpStaticRouteBkupState | 0 | 0 | |
| 1.3.6.1.4.1.171.11.69.3.3.2.5.1.4 | swL3IpStaticRouteNextHop | 0 | 0 | |
| 1.3.6.1.4.1.171.11.69.3.3.2.5.1.5 | swL3IpStaticRouteMetric | 0 | 0 |