The type of inbound route filter for the RIP interface.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.171.11.70.5.3.19.1.2
The type of inbound route filter for the RIP interface.
Identification
{1 3 6 1 4 1 171 11 70 5 3 19 1 2}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | none | 1, 2 |
| 2 | access-list | 1 |
| 2 | access_list | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DGS3650-SWL3MGMT-MIB, the row index swL3RIPInboundRouteFilterIfIpAddress is declared as IpAddress. The IPv4 address is encoded as four numeric subidentifiers, one for each address octet. For example, a row with address 192.0.2.10 has the instance .1.3.6.1.4.1.171.11.70.5.3.19.1.2.192.0.2.10. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.11.70.5.3.19.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swL3RIPInboundRouteFilterType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
access-list (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of inbound route filter for the RIP interface."
::= { swL3RIPInboundRouteFilterEntry 2 }swL3RIPInboundRouteFilterType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
access_list (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of inbound route filter for the RIP interface."
::= { swL3RIPInboundRouteFilterEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The type of inbound route filter for the RIP interface.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swL3RIPInboundRouteFilterType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3RIPInboundRouteFilterType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"1",
")",
",",
"access-list",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The type of inbound route filter for the RIP interface.\"",
"::=",
"{",
"swL3RIPInboundRouteFilterEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
1
],
[
"access-list",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The type of inbound route filter for the RIP interface."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: DGS3650-SWL3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['MacAddress', 'PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus', 'TimeStamp'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW36XXPRIMGMT-MIB': ['dgs3650']}Related source files and packages:
Status in source: current.
Names: swL3RIPInboundRouteFilterType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swL3RIPInboundRouteFilterType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"1",
")",
",",
"access_list",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The type of inbound route filter for the RIP interface.\"",
"::=",
"{",
"swL3RIPInboundRouteFilterEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
1
],
[
"access_list",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The type of inbound route filter for the RIP interface."
],
null,
null,
null,
null
]
}Module: DGS3650-SWL3MGMT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['MacAddress', 'PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus', 'TimeStamp'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW36XXPRIMGMT-MIB': ['dgs3650']}Related source files and packages:
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DGS3650-SWL3MGMT-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'OSPF-MIB': ['TOSType', 'Metric', 'AreaID', 'RouterID', 'UpToMaxAge', 'HelloRange', 'PositiveInteger', 'Status', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['MacAddress', 'PhysAddress', 'TruthValue', 'DisplayString', 'RowStatus', 'TimeStamp'], 'SNMPv2-SMI': ['Counter32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SW36XXPRIMGMT-MIB': ['dgs3650']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.11.70.5.3.19.1.1 | swL3RIPInboundRouteFilterIfIpAddress | 0 | 0 | |
| 1.3.6.1.4.1.171.11.70.5.3.19.1.3 | swL3RIPInboundRouteFilterName | 0 | 0 |