OID reference

swMSTPPortLBD

1.3.6.1.4.1.171.12.15.2.4.1.12

Description

The enabled/disabled status is used to Loop-back prevention attached to this port.

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.171.12.15.2.4.1 (swMSTPPortEntry)
Node code
12
Node names
  • swMSTPPortLBD
  • swMSTPPortBPDUFiltering
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.171.12.15.2.4.1.12
URN notation
urn:oid:1.3.6.1.4.1.171.12.15.2.4.1.12
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 171 12 15 2 4 1 12}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-common-mgmt(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortLBD(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-common-mgmt(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortBPDUFiltering(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) nmsModules(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortLBD(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) nmsModules(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortBPDUFiltering(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-common-mgmt(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortLBD(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-common-mgmt(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortBPDUFiltering(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) nmsModules(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortLBD(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) nmsModules(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortBPDUFiltering(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) dlink-common-mgmt(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortLBD(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) dlink-common-mgmt(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortBPDUFiltering(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) nmsModules(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortLBD(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) nmsModules(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortBPDUFiltering(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) dlink-common-mgmt(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortLBD(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) dlink-common-mgmt(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortBPDUFiltering(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) nmsModules(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortLBD(12)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) nmsModules(12) swMSTPMIB(15) swMSTPCtrl(2) swMSTPPortTable(4) swMSTPPortEntry(1) swMSTPPortBPDUFiltering(12)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/171/12/15/2/4/1/12
  • /ISO/Identified-Organization/6/1/4/1/171/12/15/2/4/1/12
  • /ISO/3/6/1/4/1/171/12/15/2/4/1/12
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-common-mgmt/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortLBD
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-common-mgmt/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortBPDUFiltering
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/nmsModules/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortLBD
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/nmsModules/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortBPDUFiltering
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-common-mgmt/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortLBD
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-common-mgmt/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortBPDUFiltering
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/nmsModules/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortLBD
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/nmsModules/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortBPDUFiltering
  • /iso/identified-organization/dod/internet/private/enterprise/company/dlink-common-mgmt/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortLBD
  • /iso/identified-organization/dod/internet/private/enterprise/company/dlink-common-mgmt/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortBPDUFiltering
  • /iso/identified-organization/dod/internet/private/enterprise/company/nmsModules/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortLBD
  • /iso/identified-organization/dod/internet/private/enterprise/company/nmsModules/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortBPDUFiltering
  • /iso/identified-organization/dod/internet/private/enterprise/my/dlink-common-mgmt/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortLBD
  • /iso/identified-organization/dod/internet/private/enterprise/my/dlink-common-mgmt/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortBPDUFiltering
  • /iso/identified-organization/dod/internet/private/enterprise/my/nmsModules/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortLBD
  • /iso/identified-organization/dod/internet/private/enterprise/my/nmsModules/swMSTPMIB/swMSTPCtrl/swMSTPPortTable/swMSTPPortEntry/swMSTPPortBPDUFiltering
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current, obsolete

Definitions may combine these properties differently.

Compare 3 source variants

Variant 1 — D-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community), and others

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 2 — D-Link official switch MIBs

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 3 — D-Link official switch MIBs

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
obsolete

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

ValueNameSource variants
1other1, 2, 3
2disabled1, 2, 3
3enabled1, 2, 3
4hw-filter2

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In MSTP-MIB, the row index swMSTPPort is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.12.15.2.4.1.12.<swMSTPPort>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.15.2.4.1.12

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 7 distinct definitions; some records may not include a definition.

Show 7 published definitions

swMSTPPortBPDUFiltering · current

swMSTPPortBPDUFiltering OBJECT-TYPE
      	SYNTAX  INTEGER {
               other(1),
               disabled(2),
               enabled(3)
               }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The enabled/disabled status is used to BPDU Filtering attached 
            to this port."
        ::= { swMSTPPortEntry 12 }

swMSTPPortBPDUFiltering · current

swMSTPPortBPDUFiltering OBJECT-TYPE
      	SYNTAX  INTEGER {
               other(1),
               disabled(2),
               enabled(3)
               }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The enabled/disabled status is used to BPDU Filtering attached
            to this port."
        ::= { swMSTPPortEntry 12 }

swMSTPPortBPDUFiltering · current

swMSTPPortBPDUFiltering OBJECT-TYPE
      	SYNTAX  INTEGER {
               other(1),
               disabled(2),
               enabled(3)
               }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The enabled/disabled status is used to BPDU Filtering attached 
            to this port."
        ::= { swMSTPPortEntry 12 }

swMSTPPortBPDUFiltering · current

swMSTPPortBPDUFiltering OBJECT-TYPE
      	SYNTAX  INTEGER {
               other(1),
               disabled(2),
               enabled(3),
               hw-filter(4)
               }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The enabled/disabled status is used for BPDU Filtering attached
            to this port. When the state is set to hw-filter(3), the port will be
             changed to BPDU hardware filtering mode if STP BPDU¡¦s are
             received by this port, as such that all layer 2 control
             packets will be dropped by the hardware."
        ::= { swMSTPPortEntry 12 }

swMSTPPortBPDUFiltering · current

swMSTPPortBPDUFiltering OBJECT-TYPE
      	SYNTAX  INTEGER {
               other(1),
               disabled(2),
               enabled(3)
               }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The enabled/disabled status is used for BPDU Filtering attached
            to this port."
        ::= { swMSTPPortEntry 12 }

swMSTPPortBPDUFiltering · current

swMSTPPortBPDUFiltering OBJECT-TYPE
      	SYNTAX  INTEGER {
               other(1),
               disabled(2),
               enabled(3),
               hw-filter(4)
               }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The enabled/disabled status is used for BPDU Filtering attached
            to this port. When the state is set to hw-filter(3), the port will be
             changed to BPDU hardware filtering mode if STP BPDU's are
             received by this port, as such that all layer 2 control
             packets will be dropped by the hardware."
        ::= { swMSTPPortEntry 12 }

swMSTPPortLBD · obsolete

swMSTPPortLBD OBJECT-TYPE
        SYNTAX  INTEGER {
               other(1),
               disabled(2),
               enabled(3)
               }
        MAX-ACCESS  read-write
        STATUS  obsolete
        DESCRIPTION
            "The enabled/disabled status is used to Loop-back prevention attached
            to this port."
        ::= { swMSTPPortEntry 12 }

Meaning

Descriptions

5 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The enabled/disabled status is used to Loop-back prevention attached
to this port.
Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 2

The enabled/disabled status is used to BPDU Filtering attached to this port.

Sources for this description

D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 3

The enabled/disabled status is used for BPDU Filtering attached to this port. When the state is set to hw-filter(3), the port will be changed to BPDU hardware filtering mode if STP BPDU¡¦s are received by this port, as such that all layer 2 control packets will be dropped by the hardware.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 4

The enabled/disabled status is used for BPDU Filtering attached to this port.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 5

The enabled/disabled status is used for BPDU Filtering attached to this port. When the state is set to hw-filter(3), the port will be changed to BPDU hardware filtering mode if STP BPDU's are received by this port, as such that all layer 2 control packets will be dropped by the hardware.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Evidence

Source records

5 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 2D-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)1 record · 8 sources

Description 2

swMSTPPortBPDUFiltering · currentD-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)8 sources

Status in source: current.

Names: swMSTPPortBPDUFiltering

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swMSTPPortBPDUFiltering",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    ",",
    "enabled",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The enabled/disabled status is used to BPDU Filtering attached to this port.\"",
    "::=",
    "{",
    "swMSTPPortEntry",
    "12",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "disabled",
            2
          ],
          [
            "enabled",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The enabled/disabled status is used to BPDU Filtering attached to this port."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 3D-Link official switch MIBs1 record · 1 source

Description 3

swMSTPPortBPDUFiltering · currentD-Link official switch MIBs1 source

Status in source: current.

Names: swMSTPPortBPDUFiltering

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swMSTPPortBPDUFiltering",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    ",",
    "enabled",
    "(",
    "3",
    ")",
    ",",
    "hw-filter",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The enabled/disabled status is used for BPDU Filtering attached to this port. When the state is set to hw-filter(3), the port will be changed to BPDU hardware filtering mode if STP BPDU¡¦s are received by this port, as such that all layer 2 control packets will be dropped by the hardware.\"",
    "::=",
    "{",
    "swMSTPPortEntry",
    "12",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "disabled",
            2
          ],
          [
            "enabled",
            3
          ],
          [
            "hw-filter",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The enabled/disabled status is used for BPDU Filtering attached to this port. When the state is set to hw-filter(3), the port will be changed to BPDU hardware filtering mode if STP BPDU¡¦s are received by this port, as such that all layer 2 control packets will be dropped by the hardware."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 4D-Link official switch MIBs1 record · 1 source

Description 4

swMSTPPortBPDUFiltering · currentD-Link official switch MIBs1 source

Status in source: current.

Names: swMSTPPortBPDUFiltering

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swMSTPPortBPDUFiltering",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    ",",
    "enabled",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The enabled/disabled status is used for BPDU Filtering attached to this port.\"",
    "::=",
    "{",
    "swMSTPPortEntry",
    "12",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "disabled",
            2
          ],
          [
            "enabled",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The enabled/disabled status is used for BPDU Filtering attached to this port."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 5D-Link official switch MIBs1 record · 7 sources

Description 5

swMSTPPortBPDUFiltering · currentD-Link official switch MIBs7 sources

Status in source: current.

Names: swMSTPPortBPDUFiltering

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swMSTPPortBPDUFiltering",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    ",",
    "enabled",
    "(",
    "3",
    ")",
    ",",
    "hw-filter",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The enabled/disabled status is used for BPDU Filtering attached to this port. When the state is set to hw-filter(3), the port will be changed to BPDU hardware filtering mode if STP BPDU's are received by this port, as such that all layer 2 control packets will be dropped by the hardware.\"",
    "::=",
    "{",
    "swMSTPPortEntry",
    "12",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "disabled",
            2
          ],
          [
            "enabled",
            3
          ],
          [
            "hw-filter",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The enabled/disabled status is used for BPDU Filtering attached to this port. When the state is set to hw-filter(3), the port will be changed to BPDU hardware filtering mode if STP BPDU's are received by this port, as such that all layer 2 control packets will be dropped by the hardware."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 1D-Link official switch MIBs1 record · 1 source

Description 1

swMSTPPortLBD · obsoleteD-Link official switch MIBs1 source

Status in source: obsolete.

Names: swMSTPPortLBD

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swMSTPPortLBD",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    ",",
    "enabled",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "obsolete",
    "DESCRIPTION",
    "\"The enabled/disabled status is used to Loop-back prevention attached to this port.\"",
    "::=",
    "{",
    "swMSTPPortEntry",
    "12",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "disabled",
            2
          ],
          [
            "enabled",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "obsolete"
    ],
    [
      "DESCRIPTION",
      "The enabled/disabled status is used to Loop-back prevention attached to this port."
    ],
    null,
    null,
    null,
    null
  ]
}

Historical records

Additional source information

Information from OID Repository
Vendor: D-Link Systems, Inc.
Module: MSTP-MIB

[Automatically extracted from oidview.com]
Information from MIBdepot
swMSTPPortLBD OBJECT-TYPE
      	SYNTAX  INTEGER {
               other(1),
               disabled(2),
               enabled(3)
               }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "The enabled/disabled status is used to Loop-back prevention attached 
            to this port."
        ::= { swMSTPPortEntry 12 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.171)

Henry P. Nagai

Siblings (17)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.171.12.15.2.4.1.1 swMSTPPort00 The port number of the port for this entry.
1.3.6.1.4.1.171.12.15.2.4.1.2 swMSTPPortAdminHelloTime, swMSTPPortOperHelloTime00 The amount of time between the transmission of
BPDU by this node on any port when it is the
root of the spanning tree or trying t…
1.3.6.1.4.1.171.12.15.2.4.1.3 swMSTPPortOperHelloTime, swMSTPPortAdminHelloTime00 Is the acture value of the hello time.
1.3.6.1.4.1.171.12.15.2.4.1.4 swMSTPSTPPortEnable00 The enabled/disabled status of the port.
1.3.6.1.4.1.171.12.15.2.4.1.5 swMSTPPortExternalPathCost00 The contribution of this port to the path cost of
paths towards the CIST root which include
this port.
1.3.6.1.4.1.171.12.15.2.4.1.6 swMSTPPortMigration00 When operating in MSTP mode or RSTP mode, writing TRUE(1)
to this object forces this port to transmit MST BPDUs.
Any other operat…
1.3.6.1.4.1.171.12.15.2.4.1.7 swMSTPPortAdminEdgePort00 The value of the Edge Port parameter. A
value of TRUE indicates that this port should be
assumed as an edge-port and a value of …
1.3.6.1.4.1.171.12.15.2.4.1.8 swMSTPPortOperEdgePort00 It is the acuture value of edge port status
1.3.6.1.4.1.171.12.15.2.4.1.9 swMSTPPortAdminP2P00 The point-to-point status of the LAN segment
attached to this port.
1.3.6.1.4.1.171.12.15.2.4.1.10 swMSTPPortOperP2P00 It is the acture value of P2P status.
1.3.6.1.4.1.171.12.15.2.4.1.11 swMSTPPortFbpdu, swMSTPPortLBD00 The enabled status is used to forward BPDU to thoses ports
whose forwarding BPDU status is enabled. When the status of
this port …
1.3.6.1.4.1.171.12.15.2.4.1.13 swMSTPPortRestrictedRole00
1.3.6.1.4.1.171.12.15.2.4.1.14 swMSTPPortRestrictedTCN00
1.3.6.1.4.1.171.12.15.2.4.1.15 swMSTPPortOperFilterBpdu00
1.3.6.1.4.1.171.12.15.2.4.1.16 swMSTPPortRecoverFilterBpdu00
1.3.6.1.4.1.171.12.15.2.4.1.17 swMSTPPortLoopGuard00
1.3.6.1.4.1.171.12.15.2.4.1.18 swMSTPPortRstpMultiProcessRingName00