OID reference
1.3.6.1.4.1.171.12.23.1.16
This object sets the IP Inspection VLAN(s). It is used to set the IP inspection to check ¡°VLAN ID, IP address, and MAC address¡±. Such as ¡°VID1, host-1 IP, host-1 MAC¡±, host-1 can roam smoothly between port-1 to port-2 in same VLAN domain. Note: For the VLAN specification, the value should be separated by ',' or '-…
Identification
{1 3 6 1 4 1 171 12 23 1 16}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swIpMacBindingIpInspecVlan OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets the IP Inspection VLAN(s).
It is used to set the IP inspection to check ¡°VLAN ID, IP address, and MAC address¡±.
Such as ¡°VID1, host-1 IP, host-1 MAC¡±, host-1 can roam smoothly between port-1 to port-2 in same VLAN domain.
Note:
For the VLAN specification, the value should be separated by ',' or '-'.
Such as: 1,4,7 or 1,4,7-9 ."
::= { swIpMacBindingCtrl 16 }swIpMacBindingIpInspecVlan OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets the IP Inspection VLAN(s).
It is used to set the IP inspection to check 'VLAN ID, IP address, and MAC address'.
Such as 'VID1, host-1 IP, host-1 MAC', host-1 can roam smoothly between port-1 to port-2 in same VLAN domain.
Note:
For the VLAN specification, the value should be separated by ',' or '-'.
Such as: 1,4,7 or 1,4,7-9 ."
::= { swIpMacBindingCtrl 16 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object sets the IP Inspection VLAN(s). It is used to set the IP inspection to check ¡°VLAN ID, IP address, and MAC address¡±. Such as ¡°VID1, host-1 IP, host-1 MAC¡±, host-1 can roam smoothly between port-1 to port-2 in same VLAN domain. Note: For the VLAN specification, the value should be separated by ',' or '-'. Such as: 1,4,7 or 1,4,7-9 .
Description 2
This object sets the IP Inspection VLAN(s). It is used to set the IP inspection to check 'VLAN ID, IP address, and MAC address'. Such as 'VID1, host-1 IP, host-1 MAC', host-1 can roam smoothly between port-1 to port-2 in same VLAN domain. Note: For the VLAN specification, the value should be separated by ',' or '-'. Such as: 1,4,7 or 1,4,7-9 .
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swIpMacBindingIpInspecVlan
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swIpMacBindingIpInspecVlan",
"OBJECT-TYPE",
"SYNTAX",
"DisplayString",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object sets the IP Inspection VLAN(s). It is used to set the IP inspection to check ¡°VLAN ID, IP address, and MAC address¡±. Such as ¡°VID1, host-1 IP, host-1 MAC¡±, host-1 can roam smoothly between port-1 to port-2 in same VLAN domain. Note: For the VLAN specification, the value should be separated by ',' or '-'. Such as: 1,4,7 or 1,4,7-9 .\"",
"::=",
"{",
"swIpMacBindingCtrl",
"16",
"}"
],
"syntax_tree": [
[
"row",
"DisplayString"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object sets the IP Inspection VLAN(s). It is used to set the IP inspection to check ¡°VLAN ID, IP address, and MAC address¡±. Such as ¡°VID1, host-1 IP, host-1 MAC¡±, host-1 can roam smoothly between port-1 to port-2 in same VLAN domain. Note: For the VLAN specification, the value should be separated by ',' or '-'. Such as: 1,4,7 or 1,4,7-9 ."
],
null,
null,
null,
null
]
}Module: IP-MAC-BIND-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: swIpMacBindingIpInspecVlan
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swIpMacBindingIpInspecVlan",
"OBJECT-TYPE",
"SYNTAX",
"DisplayString",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object sets the IP Inspection VLAN(s). It is used to set the IP inspection to check 'VLAN ID, IP address, and MAC address'. Such as 'VID1, host-1 IP, host-1 MAC', host-1 can roam smoothly between port-1 to port-2 in same VLAN domain. Note: For the VLAN specification, the value should be separated by ',' or '-'. Such as: 1,4,7 or 1,4,7-9 .\"",
"::=",
"{",
"swIpMacBindingCtrl",
"16",
"}"
],
"syntax_tree": [
[
"row",
"DisplayString"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object sets the IP Inspection VLAN(s). It is used to set the IP inspection to check 'VLAN ID, IP address, and MAC address'. Such as 'VID1, host-1 IP, host-1 MAC', host-1 can roam smoothly between port-1 to port-2 in same VLAN domain. Note: For the VLAN specification, the value should be separated by ',' or '-'. Such as: 1,4,7 or 1,4,7-9 ."
],
null,
null,
null,
null
]
}Module: IP-MAC-BIND-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DGS3420_Mib_3.0.3.zip.
Same file in DGS-3420_MIB_3_00_B008.zip.
Same file in DGS3420_Mib_3.0.3.zip.
Same file in DGS-3420_MIB_3_00_B008.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.23.1.1 | swIpMacBindingTrapLogState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.2 | swIpMacBindingACLMode | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.3 | swIpMacBindingRecoveryInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.4 | swIpMacBindingDHCPSnoopState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.5 | swIpMacBindingDHCPSnoopEntryClearAllState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.6 | swIpMacBindingARPInspectionState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.7 | swIpMacBindingIPv6DHCPSnoopState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.8 | swIpMacBindingNDSnoopState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.9 | swIpMacBindingIPv6DHCPSnoopEntryClearAllState, swIpMacBindingIPv6DHCPSnoopClearAllEntries | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.10 | swIpMacBindingNDSnoopEntryClearAllState, swIpMacBindingNDSnoopClearAllEntries | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.11 | swIpMacBindingRoamingState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.12 | swIpMacBindingAutosaveState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.13 | swIpMacBindingAutosaveFileName | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.14 | swIpMacBindingSaveActivity | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.15 | swIpMacBindingAutoRecoverTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.17 | swIpMacBindingDHCPPDSnoopState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.18 | swIpMacBindingPermitLinkLocalState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.23.1.19 | swIpMacBindingDenyGlobalConfigState | 0 | 0 |