OID reference

swIpMacBindingPortState

1.3.6.1.4.1.171.12.23.3.2.1.2

Description

Full description and source information

Identification

Identifier and names

Parent: 1.3.6.1.4.1.171.12.23.3.2.1 (swIpMacBindingPortEntry)
Node code: 2
Node name: swIpMacBindingPortState
Category: SNMP management object
Numeric OID: 1.3.6.1.4.1.171.12.23.3.2.1.2
URN notation: urn:oid:1.3.6.1.4.1.171.12.23.3.2.1.2

ASN.1, OID-IRI and named path variants

ASN.1 notation

{1 3 6 1 4 1 171 12 23 3 2 1 2}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-common-mgmt(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) nmsModules(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-common-mgmt(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) nmsModules(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) dlink-common-mgmt(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) nmsModules(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) dlink-common-mgmt(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) nmsModules(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nms(171) dlink-common-mgmt(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nms(171) nmsModules(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) dlink(171) dlink-common-mgmt(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) dlink(171) nmsModules(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) d-link(171) dlink-common-mgmt(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) d-link(171) nmsModules(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) company(171) dlink-common-mgmt(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) company(171) nmsModules(12) swIpMacBindMIB(23) swIpMacBindingPortMgmt(3) swIpMacBindingPortTable(2) swIpMacBindingPortEntry(1) swIpMacBindingPortState(2)}
Additional combinations skipped.

OID-IRI notation

/1/3/6/1/4/1/171/12/23/3/2/1/2
/ISO/Identified-Organization/6/1/4/1/171/12/23/3/2/1/2
/ISO/3/6/1/4/1/171/12/23/3/2/1/2

Named path variants

/iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-common-mgmt/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprise/dlink/nmsModules/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-common-mgmt/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprise/d-link/nmsModules/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprise/company/dlink-common-mgmt/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprise/company/nmsModules/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprise/my/dlink-common-mgmt/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprise/my/nmsModules/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprise/nms/dlink-common-mgmt/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprise/nms/nmsModules/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprises/dlink/dlink-common-mgmt/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprises/dlink/nmsModules/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprises/d-link/dlink-common-mgmt/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprises/d-link/nmsModules/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprises/company/dlink-common-mgmt/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
/iso/identified-organization/dod/internet/private/enterprises/company/nmsModules/swIpMacBindMIB/swIpMacBindingPortMgmt/swIpMacBindingPortTable/swIpMacBindingPortEntry/swIpMacBindingPortState
Additional combinations skipped.

SNMP properties

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: current

Definitions may combine these properties differently.

Compare 3 source variants

Variant 1 — D-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: current

Variant 2 — D-Link official switch MIBs

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: current

Variant 3 — D-Link official switch MIBs

Value type: INTEGER
Maximum access defined by MIB: read-write
Status in MIB: current

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

Value	Name	Source variants
1	other	1, 2, 3
2	enable	2
2	enable-strict	1
2	enabled-strict	3
3	disable	1, 2
3	disabled	3
4	enable-loose	1
4	enabled-loose	3

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In IP-MAC-BIND-MIB, the row index swIpMacBindingPortIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.12.23.3.2.1.2.<swIpMacBindingPortIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.23.3.2.1.2

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Published definitions

Available source records contain 7 distinct definitions; some records may not include a definition.

Show 7 published definitions

swIpMacBindingPortState · current

swIpMacBindingPortState OBJECT-TYPE
		SYNTAX		INTEGER{
					other(1),
					enable-strict(2),
					disable(3),
					enable-loose(4)
					}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object enables (strict or loose mode)/disables IP-MAC binding 
			 on the specified port.
			 
			 Note:
			 enable-strict (2): This means strict mode (SW learning). All packets are sent 
			 	    	    to the CPU. If the user chooses this option, the port will check ARP packets 
			 	            and IP packets by IP-MAC-PORT Binding entries. If the MAC 
			 	            address can be found or not found by the entry, the MAC will 
			 	            be set as dynamic learned or it will set as blocked, respectively. Other 
			 	            packets will be sent to the CPU and dropped. 
			 	            
			 enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP 
			 	            broadcast packets will be sent to the CPU. If the user chooses, 
			 	            the port will learn MAC addresses on non-ARP and non-IP 
			 	            broadcast packets directly, so these packets will be bypassed. 
			 	            But if the switch receives ARP or IP broadcast packets and 
			 	            cannot bypass the IP MAC Binding checking, the switch will set 
			 	            this MAC address as blocked and all packets from this MAC 
			 	            address will be dropped.	
			 "
		::= { swIpMacBindingPortEntry 2 }

swIpMacBindingPortState · current

swIpMacBindingPortState OBJECT-TYPE
		SYNTAX		INTEGER{
					other(1),
					enable-strict(2),
					disable(3),
					enable-loose(4)
					}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object enables (strict or loose mode)/disables IP-MAC binding 
			 on the specified port.
			 
			 Note:
			 enable-strict (2): This means strict mode (SW learning). All packets are sent 
			 	    	    to the CPU. If the user chooses, the port will check ARP packets 
			 	            and IP packets by IP-MAC-PORT Binding entries. If the MAC 
			 	            address can be found or not found by the entry, the MAC will 
			 	            be set as dynamic learned or it will set as blocked, respectively. Other 
			 	            packets will be sent to the CPU and dropped. 
			 	            
			 enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP 
			 	            broadcast packets will be sent to the CPU. If the user chooses, 
			 	            the port will learn MAC addresses on non-ARP and non-IP 
			 	            broadcast packets directly, so these packets will be bypassed. 
			 	            But if the switch receives ARP or IP broadcast packets and 
			 	            cannot bypass the IP MAC Binding checking, the switch will set 
			 	            this MAC address as blocked and all packets from this MAC 
			 	            address will be dropped.	
			 "
		::= { swIpMacBindingPortEntry 2 }

swIpMacBindingPortState · current

swIpMacBindingPortState OBJECT-TYPE
		SYNTAX		INTEGER{
					other(1),
					enable-strict(2),
					disable(3),
					enable-loose(4)
					}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object enables (strict or loose mode)/disables IP-MAC binding 
			 on the specified port.
			 
			 Note:
			 enable-strict (2): This means strict mode (SW learning). All packets are sent 
			 	    	    to the CPU. If the user chooses this option, the port will check ARP packets 
			 	            and IP packets by the IP-MAC-PORT Binding entries. If the MAC 
			 	            address can or cannot be found by the entry, the MAC will 
			 	            be set as a dynamic learned or blocked entry, respectively. Other 
			 	            packets will be sent to the CPU and dropped. 
			 	            
			 enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP 
			 	            broadcast packets will be sent to the CPU. If the user chooses, 
			 	            the port will learn MAC addresses on non-ARP and non-IP 
			 	            broadcast packets directly, so these packets will be bypassed. 
			 	            However, if the switch receives ARP or IP broadcast packets and 
			 	            cannot bypass the IP MAC Binding checks, the switch will set 
			 	            this MAC address as blocked and all packets from this MAC 
			 	            address will be dropped.	
			 "
		::= { swIpMacBindingPortEntry 2 }

swIpMacBindingPortState · current

swIpMacBindingPortState OBJECT-TYPE
		SYNTAX		INTEGER{
						other(1),
						enable(2),
						disable(3)
						}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object enable\disable the IP-MAC binding on the specified port."
		::= { swIpMacBindingPortEntry 2 }

swIpMacBindingPortState · current

swIpMacBindingPortState OBJECT-TYPE
		SYNTAX		INTEGER{
						other(1),
						enable(2),
						disable(3)
						}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object enables/disables IP-MAC binding on the specified port."
		::= { swIpMacBindingPortEntry 2 }

swIpMacBindingPortState · current

swIpMacBindingPortState OBJECT-TYPE
		SYNTAX		INTEGER{
					other(1),
					enabled-strict(2),
					disabled(3),
					enabled-loose(4)
					}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object enabled (strict or loose mode)/disabled IP-MAC binding 
			 on the specified port.
			 
			 Note:
			 enabled-strict (2): This means strict mode (SW learning). All packets are sent 
			 	    	    to the CPU. If the user chooses this option, the port will check ARP packets 
			 	            and IP packets by IP-MAC-PORT Binding entries. If the MAC 
			 	            address can be found or not found by the entry, the MAC will 
			 	            be set as dynamic learned or it will set as blocked, respectively. Other 
			 	            packets will be sent to the CPU and dropped. 
			 	            
			 enabled-loose (4) : This means loose mode (HW learning): Only ARP packets and IP 
			 	            broadcast packets will be sent to the CPU. If the user chooses, 
			 	            the port will learn MAC addresses on non-ARP and non-IP 
			 	            broadcast packets directly, so these packets will be bypassed. 
			 	            But if the switch receives ARP or IP broadcast packets and 
			 	            cannot bypass the IP MAC Binding checking, the switch will set 
			 	            this MAC address as blocked and all packets from this MAC 
			 	            address will be dropped.	
			 "
		::= { swIpMacBindingPortEntry 2 }

swIpMacBindingPortState · current

swIpMacBindingPortState OBJECT-TYPE
		SYNTAX		INTEGER{
					other(1),
					enable-strict(2),
					disable(3),
					enable-loose(4)
					}
		MAX-ACCESS	read-write
		STATUS		current
		DESCRIPTION
			"This object enables (strict or loose mode)/disables IP-MAC binding 
			 on the specified port.
			 
			 Note:
			 enable-strict (2): SW learning 
			 enable-loose (4) : HW learning
			 "
		::= { swIpMacBindingPortEntry 2 }

Meaning

Descriptions

7 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 2

This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 3

This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by the IP-MAC-PORT Binding entries. If the MAC address can or cannot be found by the entry, the MAC will be set as a dynamic learned or blocked entry, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. However, if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checks, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped.

Sources for this description

D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 4

This object enable\disable the IP-MAC binding on the specified port.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 5

This object enables/disables IP-MAC binding on the specified port.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 6

This object enabled (strict or loose mode)/disabled IP-MAC binding on the specified port. Note: enabled-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enabled-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 7

This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): SW learning enable-loose (4) : HW learning

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Evidence

Source records

7 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1D-Link official switch MIBs1 record · 5 sources

Description 1

swIpMacBindingPortState · currentD-Link official switch MIBs5 sources

Status in source: current.

Names: swIpMacBindingPortState

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swIpMacBindingPortState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "enable-strict",
    "(",
    "2",
    ")",
    ",",
    "disable",
    "(",
    "3",
    ")",
    ",",
    "enable-loose",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped. \"",
    "::=",
    "{",
    "swIpMacBindingPortEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "enable-strict",
            2
          ],
          [
            "disable",
            3
          ],
          [
            "enable-loose",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped."
    ],
    null,
    null,
    null,
    null
  ]
}

D-Link official switch MIBs · Publisher's source file: Source package: DES-1228ME_B1_MIB.zip
Module: IP-MAC-BIND-MIB

See published definition above
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Browse all related files for IPMacBind.mib
Same file in DES-3200_MIB_20150731.zip.
Same file in DES-3200_MIB_20150731.zip.
Same file in DES-3200_MIB_20150306.zip.
Same file in DES-3200_MIB_20150306.zip.
D-Link official switch MIBs · Publisher's source file: Source package: DES3528_Series_FW_v2.60.017_MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Same file in DGS-3710-12C_A1_FW_v1.00.029_MIB_v1.00.029.rar.
Same file in DGS-3710-12C_A1_FW_v1.00.029_MIB_v1.00.029.rar.
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
D-Link official switch MIBs · Publisher's source file: Source package: DGS-3200_series_FW_1.50.B019_MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DGS-3200_series_FW_1.50.B019_MIB.zip
D-Link official switch MIBs · Publisher's source file: Source package: DGS-3400 Series_MIB of FW v2.60.B26.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DGS-3400 Series_MIB of FW v2.60.B26.zip
D-Link official switch MIBs · Publisher's source file: Source package: DGS3400_Series_MIB_of_FW _R3.00.7z
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS3600_Series_FW_v3.00.B14_MIB.7z.

Records for description 2D-Link official switch MIBs1 record · 4 sources

Description 2

swIpMacBindingPortState · currentD-Link official switch MIBs4 sources

Status in source: current.

Names: swIpMacBindingPortState

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swIpMacBindingPortState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "enable-strict",
    "(",
    "2",
    ")",
    ",",
    "disable",
    "(",
    "3",
    ")",
    ",",
    "enable-loose",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped. \"",
    "::=",
    "{",
    "swIpMacBindingPortEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "enable-strict",
            2
          ],
          [
            "disable",
            3
          ],
          [
            "enable-loose",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped."
    ],
    null,
    null,
    null,
    null
  ]
}

D-Link official switch MIBs · Publisher's source file: Source package: DES-3028 A1_DES-3028G A1_DES-3028P A1_DES-3052 A1_DES-3052P A1_MIB v2.00.B27.zip
Module: IP-MAC-BIND-MIB

See published definition above
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Same file in DES3028_R2.94_MIB.zip.
Same file in DES3028_R2.94_MIB.zip.
Same file in DES3028_R2.94_MIB.zip.
Same file in DES3028_R2.94_MIB.zip.
D-Link official switch MIBs · Publisher's source file: Source package: DES3528_Series_FW_v1.03.B008_MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DES3528_Series_FW_v1.03.B008_MIB.zip
D-Link official switch MIBs · Publisher's source file: Source package: DGS-3200_Series_FW_v1.35.B019_MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DGS-3200_Series_FW_v1.35.B019_MIB.zip
D-Link official switch MIBs · Publisher's source file: Source package: DGS-3700 Series A1_MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DGS-3700 Series A1_MIB.zip

Records for description 3D-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)1 record · 9 sources

Description 3

swIpMacBindingPortState · currentD-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)9 sources

Status in source: current.

Names: swIpMacBindingPortState

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swIpMacBindingPortState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "enable-strict",
    "(",
    "2",
    ")",
    ",",
    "disable",
    "(",
    "3",
    ")",
    ",",
    "enable-loose",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by the IP-MAC-PORT Binding entries. If the MAC address can or cannot be found by the entry, the MAC will be set as a dynamic learned or blocked entry, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. However, if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checks, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped. \"",
    "::=",
    "{",
    "swIpMacBindingPortEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "enable-strict",
            2
          ],
          [
            "disable",
            3
          ],
          [
            "enable-loose",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by the IP-MAC-PORT Binding entries. If the MAC address can or cannot be found by the entry, the MAC will be set as a dynamic learned or blocked entry, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. However, if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checks, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped."
    ],
    null,
    null,
    null,
    null
  ]
}

D-Link official switch MIBs · Publisher's source file: Source package: DES-3200-26_28_C1_MIB_of_FW_R4.00.rar
Module: IP-MAC-BIND-MIB

See published definition above
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Browse all related files for IPMacBind.mib
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DGS-3620_Series_FW_v2.00.015_MIB.zip.
Same file in DGS-3620_Series_FW_v1.00.035_MIB.zip.
D-Link official switch MIBs · Publisher's source file: Source package: DES-3200_R4.46_MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Same file in DES-3200_R4.46_MIB.zip.
Same file in DES-3200_R4.46_MIB.zip.
Same file in DES-3200_R4.46_MIB.zip.
Same file in DES-3200_R4.46_MIB.zip.
D-Link official switch MIBs · Publisher's source file: Source package: DGS-1510_ME_V1.10_MIB_20160606.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Browse all related files for IPMacBind.mib
Same file in DGS-3000_R1.10_MIB_20140707.zip.
Same file in DGS-3000_R1.10_MIB_20140707.zip.
Same file in DGS-3000_R1.10_MIB_20140707.zip.
Same file in DGS-3000_series_a1_mib_of_fw_v1.00.021.zip.
D-Link official switch MIBs · Publisher's source file: Source package: DGS-3000_R4.00_mibs_20171229_2.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.

D-Link official switch MIBs · Publisher's source file: Source package: DGS3000_28SC_Mib_20141031.zip

Module: IP-MAC-BIND-MIB

Same published definition

Module imports

{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

· Download IPMacBind.mib

Related source files and packages:

MIB package: DGS3000_28SC_Mib_20141031.zip

D-Link official switch MIBs · Publisher's source file: Source package: DGS-3120_AX_MIB_of_FW_v3.10.012.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Browse all related files for IPMacBind.mib
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620_Series_FW_v2.60.016_MIB.7z.
Same file in DGS-3620-r3.0-mib-20171011.zip.
D-Link official switch MIBs · Publisher's source file: Source package: DGS-3420_Series_A1_MIB_of_FW_v1.50.017.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Same file in DGS-3620_Series_FW_v2.50.017_MIB.7z.
Same file in DGS-3420_Series_A1_MIB_of_FW_v1.50.017.zip.
Same file in DGS-3420_Series_A1_MIB_of_FW_v1.50.017.zip.
Same file in DGS-3420_Series_A1_MIB_of_FW_v1.50.017.zip.
D-Link official switch MIBs · Publisher's source file: Source package: DGS3420_Mib_3.0.3.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Browse all related files for IPMacBind.mib
Same file in DGS3420_Mib_3.0.3.zip.
Same file in DGS-3420_MIB_3_00_B008.zip.
Same file in DGS3420_Mib_3.0.3.zip.
Same file in DGS-3420_MIB_3_00_B008.zip.
D-Link MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive. D-Link support.

Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IP-MAC-BIND-MIB
Related source files and packages:
- Observium Community original distribution archive

Records for description 4D-Link official switch MIBs1 record · 4 sources

Description 4

swIpMacBindingPortState · currentD-Link official switch MIBs4 sources

Status in source: current.

Names: swIpMacBindingPortState

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swIpMacBindingPortState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "enable",
    "(",
    "2",
    ")",
    ",",
    "disable",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object enable\\disable the IP-MAC binding on the specified port.\"",
    "::=",
    "{",
    "swIpMacBindingPortEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "enable",
            2
          ],
          [
            "disable",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object enable\\disable the IP-MAC binding on the specified port."
    ],
    null,
    null,
    null,
    null
  ]
}

D-Link official switch MIBs · Publisher's source file: Source package: DES3000MIB_070517.rar
Module: IP-MAC-BIND-MIB

See published definition above
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DES3000MIB_070517.rar
D-Link official switch MIBs · Publisher's source file: Source package: DES30xx_mibs_300B25.rar
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DES30xx_mibs_300B25.rar
D-Link official switch MIBs · Publisher's source file: Source package: DES3800R3_3.00.B29.MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DES3800R3_3.00.B29.MIB.zip
D-Link official switch MIBs · Publisher's source file: Source package: DES3828P_1.00.B23.MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Same file in DES3852R2_2-00-B16-MIB.zip.
Same file in DES3828R2_2-00-B16-MIB.zip.

Records for description 5D-Link official switch MIBs1 record · 3 sources

Description 5

swIpMacBindingPortState · currentD-Link official switch MIBs3 sources

Status in source: current.

Names: swIpMacBindingPortState

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swIpMacBindingPortState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "enable",
    "(",
    "2",
    ")",
    ",",
    "disable",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object enables/disables IP-MAC binding on the specified port.\"",
    "::=",
    "{",
    "swIpMacBindingPortEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "enable",
            2
          ],
          [
            "disable",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object enables/disables IP-MAC binding on the specified port."
    ],
    null,
    null,
    null,
    null
  ]
}

D-Link official switch MIBs · Publisher's source file: Source package: DES1228ME_R1.60_MIB_20150603.zip
Module: IP-MAC-BIND-MIB

See published definition above
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DES1228ME_R1.60_MIB_20150603.zip
D-Link official switch MIBs · Publisher's source file: Source package: DES-3000_Series_A3_FW_v4.20.B27_MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Show more related files and packages
Same file in DES-3000_R4.3-4.00.00.22-MIB.zip.
Same file in DES-3000_R4.3-4.00.00.22-MIB.zip.
Same file in DES-3000_R4.3-4.00.00.22-MIB.zip.
Same file in DES-3000_R4.3-4.00.00.22-MIB.zip.
D-Link official switch MIBs · Publisher's source file: Source package: DGS-3200_A1_FW1-01-B015_MIB.zip
Module: IP-MAC-BIND-MIB

Same published definition
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DGS-3200_A1_FW1-01-B015_MIB.zip

Records for description 6D-Link official switch MIBs1 record · 1 source

Description 6

swIpMacBindingPortState · currentD-Link official switch MIBs1 source

Status in source: current.

Names: swIpMacBindingPortState

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swIpMacBindingPortState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "enabled-strict",
    "(",
    "2",
    ")",
    ",",
    "disabled",
    "(",
    "3",
    ")",
    ",",
    "enabled-loose",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object enabled (strict or loose mode)/disabled IP-MAC binding on the specified port. Note: enabled-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enabled-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped. \"",
    "::=",
    "{",
    "swIpMacBindingPortEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "enabled-strict",
            2
          ],
          [
            "disabled",
            3
          ],
          [
            "enabled-loose",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object enabled (strict or loose mode)/disabled IP-MAC binding on the specified port. Note: enabled-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses this option, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enabled-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses, the port will learn MAC addresses on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives ARP or IP broadcast packets and cannot bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped."
    ],
    null,
    null,
    null,
    null
  ]
}

D-Link official switch MIBs · Publisher's source file: Source package: DES3528_Series_FW_v2.00.B033_MIB.zip
Module: IP-MAC-BIND-MIB

See published definition above
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
- MIB package: DES3528_Series_FW_v2.01.B042_MIB.zip
- MIB package: DES3528_Series_FW_v2.00.B033_MIB.zip
Same file in DES3528_Series_FW_v2.01.B042_MIB.zip.

Records for description 7D-Link official switch MIBs1 record · 1 source

Description 7

swIpMacBindingPortState · currentD-Link official switch MIBs1 source

Status in source: current.

Names: swIpMacBindingPortState

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swIpMacBindingPortState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    ",",
    "enable-strict",
    "(",
    "2",
    ")",
    ",",
    "disable",
    "(",
    "3",
    ")",
    ",",
    "enable-loose",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): SW learning enable-loose (4) : HW learning \"",
    "::=",
    "{",
    "swIpMacBindingPortEntry",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "other",
            1
          ],
          [
            "enable-strict",
            2
          ],
          [
            "disable",
            3
          ],
          [
            "enable-loose",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): SW learning enable-loose (4) : HW learning"
    ],
    null,
    null,
    null,
    null
  ]
}

D-Link official switch MIBs · Publisher's source file: Source package: DES-3800_v4.50.B12.mib.zip
Module: IP-MAC-BIND-MIB

See published definition above
Module imports
```
{'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}
```
· Download IPMacBind.mib
Related source files and packages:
Same file in DES-3800_v4.50.B12.mib.zip.
Same file in DES-3800_v4.50.B12.mib.zip.

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.171)

Henry P. Nagai

Siblings (20)

OID	Name	Direct children	Descendants	Description
1.3.6.1.4.1.171.12.23.3.2.1.1	swIpMacBindingPortIndex	0	0
1.3.6.1.4.1.171.12.23.3.2.1.3	swIpMacBindingPortZeroIPState	0	0
1.3.6.1.4.1.171.12.23.3.2.1.4	swIpMacBindingPortForwardDhcpPkt	0	0
1.3.6.1.4.1.171.12.23.3.2.1.5	swIpMacBindingPortDHCPSnoopMaxEntry	0	0
1.3.6.1.4.1.171.12.23.3.2.1.6	swIpMacBindingPortDHCPSnoopEntryClearAction	0	0
1.3.6.1.4.1.171.12.23.3.2.1.7	swIpMacBindingPortMode	0	0
1.3.6.1.4.1.171.12.23.3.2.1.8	swIpMacBindingPortStopLearningThreshold	0	0
1.3.6.1.4.1.171.12.23.3.2.1.9	swIpMacBindingPortRecoverLearning	0	0
1.3.6.1.4.1.171.12.23.3.2.1.10	swIpMacBindingPortLearningStatus	0	0
1.3.6.1.4.1.171.12.23.3.2.1.11	swIpMacBindingPortIPv6State	0	0
1.3.6.1.4.1.171.12.23.3.2.1.12	swIpMacBindingPortIPv6DHCPSnoopMaxEntry	0	0
1.3.6.1.4.1.171.12.23.3.2.1.13	swIpMacBindingPortNDSnoopMaxEntry	0	0
1.3.6.1.4.1.171.12.23.3.2.1.14	swIpMacBindingPortIPv6DHCPSnoopEntryClearAction, swIpMacBindingPortIPv6DHCPSnoopClearEntry	0	0
1.3.6.1.4.1.171.12.23.3.2.1.15	swIpMacBindingPortNDSnoopEntryClearAction, swIpMacBindingPortNDSnoopClearEntry	0	0
1.3.6.1.4.1.171.12.23.3.2.1.16	swIpMacBindingPortARPInspection	0	0
1.3.6.1.4.1.171.12.23.3.2.1.17	swIpMacBindingPortIPInspection	0	0
1.3.6.1.4.1.171.12.23.3.2.1.18	swIpMacBindingPortIPProtocol	0	0
1.3.6.1.4.1.171.12.23.3.2.1.19	swIpMacBindingPortNDInspection	0	0
1.3.6.1.4.1.171.12.23.3.2.1.20	swIpMacBindingPortLimitRateValue	0	0
1.3.6.1.4.1.171.12.23.3.2.1.21	swIpMacBindingPortLimitRateAction	0	0