Description 1
This object is used to enable or disable the sending of MAC-based Access Control traps.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.12.35.1.13
This object is used to enable or disable the sending of MAC-based Access Control traps.
Identification
{1 3 6 1 4 1 171 12 35 1 13}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enabled | 1, 2 |
| 2 | disabled | 1, 2 |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.12.35.1.13.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 5 distinct definitions; some records may not include a definition.
swMacBasedAuthTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable the sending of MAC-based Access Control traps."
DEFVAL {enabled}
::= { swMBACtrl 13 }swMacBasedAuthTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable the trap state of MAC-based
Access Control."
DEFVAL {disabled}
::= { swMBACtrl 13 }swMacBasedAuthTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object sets the trap state .
When the trap state is enabled(1),
whenever the device detects a MBA event,
a trap will be sent out."
DEFVAL {enabled}
::= { swMBACtrl 13 }swMacBasedAuthTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable sending of
MAC-based Access Control traps."
DEFVAL {enabled}
::= { swMBACtrl 13 }swMacBasedAuthTrapState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable or disable sending of
MAC-based Access Control traps."
DEFVAL {enabled}
::= { swMBACtrl 13 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object is used to enable or disable the sending of MAC-based Access Control traps.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
This object is used to enable/disable the trap state of MAC-based Access Control.
Description 3
This object sets the trap state . When the trap state is enabled(1), whenever the device detects a MBA event, a trap will be sent out.
Description 4
This object is used to enable or disable sending of MAC-based Access Control traps.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swMacBasedAuthTrapState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthTrapState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to enable or disable the sending of MAC-based Access Control traps.\"",
"DEFVAL",
"{",
"enabled",
"}",
"::=",
"{",
"swMBACtrl",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to enable or disable the sending of MAC-based Access Control traps."
],
null,
null,
null,
[
"DEFVAL",
"enabled"
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Module: Mac-Based-Authentication-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620_Series_FW_v2.60.016_MIB.7z.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: Mac-Based-Authentication-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Status in source: current.
Names: swMacBasedAuthTrapState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthTrapState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to enable/disable the trap state of MAC-based Access Control.\"",
"DEFVAL",
"{",
"disabled",
"}",
"::=",
"{",
"swMBACtrl",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to enable/disable the trap state of MAC-based Access Control."
],
null,
null,
null,
[
"DEFVAL",
"disabled"
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DES-3200_MIB_20150731.zip.
Same file in DES-3200_MIB_20150731.zip.
Same file in DES-3200_MIB_20150306.zip.
Same file in DES-3200_MIB_20150306.zip.
Status in source: current.
Names: swMacBasedAuthTrapState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthTrapState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object sets the trap state . When the trap state is enabled(1), whenever the device detects a MBA event, a trap will be sent out.\"",
"DEFVAL",
"{",
"enabled",
"}",
"::=",
"{",
"swMBACtrl",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object sets the trap state . When the trap state is enabled(1), whenever the device detects a MBA event, a trap will be sent out."
],
null,
null,
null,
[
"DEFVAL",
"enabled"
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Status in source: current.
Names: swMacBasedAuthTrapState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthTrapState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to enable or disable sending of MAC-based Access Control traps.\"",
"DEFVAL",
"{",
"enabled",
"}",
"::=",
"{",
"swMBACtrl",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to enable or disable sending of MAC-based Access Control traps."
],
null,
null,
null,
[
"DEFVAL",
"enabled"
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DGS-3120_MIB_of_FW_v2.00.010.zip.rar.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.35.1.1 | swMacBasedAuthState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.2 | swMacBasedAuthMethod | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.3 | swMacBasedAuthPWD | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.4 | swMacBasedAuthVlanName | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.5 | swMacBasedAuthMemberPorts | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.7 | swMacBasedAuthVlanNameDelState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.8 | swMacBasedAuthClearAllAction | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.9 | swMacBasedAuthMaxUser | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.10 | swMacBasedAuthFailOver | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.11 | swMacBasedAuthRadiusAuthorization | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.12 | swMacBasedAuthLocalAuthorization | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.14 | swMacBasedAuthLogState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.1.15 | swMacBasedAuthPwdType | 0 | 0 |