OID reference
1.3.6.1.4.1.171.12.35.3.1.1.5
If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: If the block time is set to 0, it means that clients that fail authentication will not be blocked.
Identification
{1 3 6 1 4 1 171 12 35 3 1 1 5}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In Mac-Based-Authentication-MIB, the row index swMacBasedAuthPortIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.12.35.3.1.1.5.<swMacBasedAuthPortIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.35.3.1.1.5
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 6 distinct definitions; some records may not include a definition.
swMacBasedAuthPortBlockTime OBJECT-TYPE
SYNTAX INTEGER(0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a host fails to authenticate, the next authentication will not start within
the block time unless the user clears the entry state manually.
Note: If the block time is set to 0, it means that clients that fail authentication
will not be blocked."
DEFVAL {300}
::= { swMacBasedAuthPortEntry 5 }swMacBasedAuthPortBlockTime OBJECT-TYPE
SYNTAX INTEGER(0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a host fails to authenticate, the next authentication
will not start within the block time unless the user clears the entry state manually.
Note:
When 0 is set on the specified port, it means block authentication fail mac,
that is the block time is set to infinite.
"
DEFVAL {300}
::= { swMacBasedAuthPortEntry 5 }swMacBasedAuthPortBlockTime OBJECT-TYPE
SYNTAX INTEGER(0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a host fails to authenticate, the next authentication
will not start within the block time unless the user clears the entry state manually.
Note:
When 0 is set on the specified port, it means that the block authentication fail MAC address
block time is set to infinite.
"
DEFVAL {300}
::= { swMacBasedAuthPortEntry 5 }swMacBasedAuthPortHoldTime OBJECT-TYPE
SYNTAX INTEGER(0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a host fails to authenticate, the next authentication
will not start within the hold_time unless the user clears the entry state manually.
Note:
When 0 is set on the specified port, it means block authentication fail mac,
that is the hold time is set to infinite.
"
DEFVAL {300}
::= { swMacBasedAuthPortEntry 5 }swMacBasedAuthPortBlockTime OBJECT-TYPE
SYNTAX INTEGER(0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a host fails to authenticate, the next authentication will not start within
the block time unless the user clears the entry state manually.
Note: When 0 is set on the specified port, it means that the block authentication
fail MAC address block time is set to infinite."
DEFVAL {300}
::= { swMacBasedAuthPortEntry 5 }swMacBasedAuthPortHoldTime OBJECT-TYPE
SYNTAX INTEGER(0..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If a host fails to authenticate, the next authentication
will not start within the hold_time unless the user clears the entry state manually.
Note:
When 0 is set on the specified port,it means block authentication fail mac,
that is hold time is set to infinite.
"
DEFVAL {300}
::= { swMacBasedAuthPortEntry 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: If the block time is set to 0, it means that clients that fail authentication will not be blocked.
Description 2
If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means block authentication fail mac, that is the block time is set to infinite.
Description 3
If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means that the block authentication fail MAC address block time is set to infinite.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 4
If a host fails to authenticate, the next authentication will not start within the hold_time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means block authentication fail mac, that is the hold time is set to infinite.
Description 5
If a host fails to authenticate, the next authentication will not start within the hold_time unless the user clears the entry state manually. Note: When 0 is set on the specified port,it means block authentication fail mac, that is hold time is set to infinite.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swMacBasedAuthPortBlockTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthPortBlockTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"300",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: If the block time is set to 0, it means that clients that fail authentication will not be blocked.\"",
"DEFVAL",
"{",
"300",
"}",
"::=",
"{",
"swMacBasedAuthPortEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
300
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: If the block time is set to 0, it means that clients that fail authentication will not be blocked."
],
null,
null,
null,
[
"DEFVAL",
300
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Same file in DGS-3000_R4.00_mibs_20171229_2.zip.
Status in source: current.
Names: swMacBasedAuthPortBlockTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthPortBlockTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"300",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means block authentication fail mac, that is the block time is set to infinite. \"",
"DEFVAL",
"{",
"300",
"}",
"::=",
"{",
"swMacBasedAuthPortEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
300
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means block authentication fail mac, that is the block time is set to infinite."
],
null,
null,
null,
[
"DEFVAL",
300
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DES-3200_MIB_20150731.zip.
Same file in DES-3200_MIB_20150731.zip.
Same file in DES-3200_MIB_20150306.zip.
Same file in DES-3200_MIB_20150306.zip.
Module: Mac-Based-Authentication-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3710-12C_A1_FW_v1.00.029_MIB_v1.00.029.rar.
Same file in DGS-3710-12C_A1_FW_v1.00.029_MIB_v1.00.029.rar.
Same file in DES-3810_Series_A1_MIB_of_FW_v2.20.010.zip.
Same file in DES-3810_Series_A1_MIB_of_FW_v2.20.010.zip.
Module: Mac-Based-Authentication-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DGS-3120_MIB_of_FW_v2.00.010.zip.rar.
Status in source: current.
Names: swMacBasedAuthPortBlockTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthPortBlockTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"300",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means that the block authentication fail MAC address block time is set to infinite. \"",
"DEFVAL",
"{",
"300",
"}",
"::=",
"{",
"swMacBasedAuthPortEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
300
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means that the block authentication fail MAC address block time is set to infinite."
],
null,
null,
null,
[
"DEFVAL",
300
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
Same file in DES3528_Series_FW_v3.00.012_MIB.zip.
Status in source: current.
Names: swMacBasedAuthPortBlockTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthPortBlockTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"300",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means that the block authentication fail MAC address block time is set to infinite.\"",
"DEFVAL",
"{",
"300",
"}",
"::=",
"{",
"swMacBasedAuthPortEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
300
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means that the block authentication fail MAC address block time is set to infinite."
],
null,
null,
null,
[
"DEFVAL",
300
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620_Series_FW_v2.60.016_MIB.7z.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: Mac-Based-Authentication-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Status in source: current.
Names: swMacBasedAuthPortHoldTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthPortHoldTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"300",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"If a host fails to authenticate, the next authentication will not start within the hold_time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means block authentication fail mac, that is the hold time is set to infinite. \"",
"DEFVAL",
"{",
"300",
"}",
"::=",
"{",
"swMacBasedAuthPortEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
300
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If a host fails to authenticate, the next authentication will not start within the hold_time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means block authentication fail mac, that is the hold time is set to infinite."
],
null,
null,
null,
[
"DEFVAL",
300
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DES3528_Series_FW_v2.01.B042_MIB.zip.
Module: Mac-Based-Authentication-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Module: Mac-Based-Authentication-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS-3600_Series_FW_v3.00.B14_MIB.7z.
Same file in DGS3600_Series_FW_v3.00.B14_MIB.7z.
Status in source: current.
Names: swMacBasedAuthPortHoldTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swMacBasedAuthPortHoldTime",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"300",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"If a host fails to authenticate, the next authentication will not start within the hold_time unless the user clears the entry state manually. Note: When 0 is set on the specified port,it means block authentication fail mac, that is hold time is set to infinite. \"",
"DEFVAL",
"{",
"300",
"}",
"::=",
"{",
"swMacBasedAuthPortEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
300
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If a host fails to authenticate, the next authentication will not start within the hold_time unless the user clears the entry state manually. Note: When 0 is set on the specified port,it means block authentication fail mac, that is hold time is set to infinite."
],
null,
null,
null,
[
"DEFVAL",
300
]
]
}Module: Mac-Based-Authentication-MIB
See published definition above
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Same file in DGS-3700 Series A1_MIB.zip.
Module: Mac-Based-Authentication-MIB
{'SNMPv2-TC': ['MacAddress', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.35.3.1.1.1 | swMacBasedAuthPortIndex | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.3.1.1.2 | swMacBasedAuthPortState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.3.1.1.3 | swMacBasedAuthPortMode | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.3.1.1.4 | swMacBasedAuthPortAgingTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.3.1.1.6 | swMacBasedAuthClearPortAction | 0 | 0 | |
| 1.3.6.1.4.1.171.12.35.3.1.1.7 | swMacBasedAuthPortMaxUser | 0 | 0 |