Description 1
This indicates the Report Suppression State of this VLAN. When set to enabled, intergrate into multiple IGMP reports or only integrate a single IGMP report for a specific (S,G) before sending to the router port.
OID reference
1.3.6.1.4.1.171.12.73.3.1.1.1.55
This indicates the Report Suppression State of this VLAN. When set to enabled, intergrate into multiple IGMP reports or only integrate a single IGMP report for a specific (S,G) before sending to the router port.
Identification
{1 3 6 1 4 1 171 12 73 3 1 1 1 55}
| Value | Name |
|---|---|
| 1 | enabled |
| 2 | disabled |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In MCAST-SNOOPING-MIB, the row index swIGMPSnoopingVlanID is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.12.73.3.1.1.1.55.<swIGMPSnoopingVlanID>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.73.3.1.1.1.55
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
swIGMPSnpCtrlReportSuppressionState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the Report Suppression State of this VLAN.
When set to enabled, intergrate into multiple IGMP reports or only integrate a single IGMP report for
a specific (S,G)
before sending to the router port."
::= { swIGMPSnoopingCtrlEntry 55 }swIGMPSnpCtrlReportSuppressionState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the Report Suppression State of this VLAN.
When set to enabled,only the first report of IGMPv1 and IGMPv2 will send to router."
::= { swIGMPSnoopingCtrlEntry 55 }swIGMPSnpCtrlReportSuppressionState OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the Report Suppression State of this VLAN.
When set to enabled, only the first report of IGMPv1 and IGMPv2 will send to router."
::= { swIGMPSnoopingCtrlEntry 55 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This indicates the Report Suppression State of this VLAN. When set to enabled, intergrate into multiple IGMP reports or only integrate a single IGMP report for a specific (S,G) before sending to the router port.
Description 2
This indicates the Report Suppression State of this VLAN. When set to enabled,only the first report of IGMPv1 and IGMPv2 will send to router.
Description 3
This indicates the Report Suppression State of this VLAN. When set to enabled, only the first report of IGMPv1 and IGMPv2 will send to router.
Evidence
Matching descriptions are grouped; representative source files are shown for each definition.
Status in source: current.
Names: swIGMPSnpCtrlReportSuppressionState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swIGMPSnpCtrlReportSuppressionState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This indicates the Report Suppression State of this VLAN. When set to enabled, intergrate into multiple IGMP reports or only integrate a single IGMP report for a specific (S,G) before sending to the router port.\"",
"::=",
"{",
"swIGMPSnoopingCtrlEntry",
"55",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This indicates the Report Suppression State of this VLAN. When set to enabled, intergrate into multiple IGMP reports or only integrate a single IGMP report for a specific (S,G) before sending to the router port."
],
null,
null,
null,
null
]
}Module: MCAST-SNOOPING-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'IpAddress', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Module: MCAST-SNOOPING-MIB
{'SNMPv2-TC': ['DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'IpAddress', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Status in source: current.
Names: swIGMPSnpCtrlReportSuppressionState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swIGMPSnpCtrlReportSuppressionState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This indicates the Report Suppression State of this VLAN. When set to enabled,only the first report of IGMPv1 and IGMPv2 will send to router.\"",
"::=",
"{",
"swIGMPSnoopingCtrlEntry",
"55",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This indicates the Report Suppression State of this VLAN. When set to enabled,only the first report of IGMPv1 and IGMPv2 will send to router."
],
null,
null,
null,
null
]
}Module: MCAST-SNOOPING-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'IpAddress', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Module: MCAST-SNOOPING-MIB
{'SNMPv2-TC': ['DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'IpAddress', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Status in source: current.
Names: swIGMPSnpCtrlReportSuppressionState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swIGMPSnpCtrlReportSuppressionState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This indicates the Report Suppression State of this VLAN. When set to enabled, only the first report of IGMPv1 and IGMPv2 will send to router.\"",
"::=",
"{",
"swIGMPSnoopingCtrlEntry",
"55",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This indicates the Report Suppression State of this VLAN. When set to enabled, only the first report of IGMPv1 and IGMPv2 will send to router."
],
null,
null,
null,
null
]
}Module: MCAST-SNOOPING-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'IpAddress', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Module: MCAST-SNOOPING-MIB
{'SNMPv2-TC': ['DisplayString', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'IpAddress', 'Counter32'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.73.3.1.1.1.5 | swIGMPSnpCtrlQueryInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.10 | swIGMPSnpCtrlMaxResponseTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.15 | swIGMPSnpCtrlRobustnessValue | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.20 | swIGMPSnpCtrlLastMemberQueryInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.25 | swIGMPSnpCtrlQuerierState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.30 | swIGMPSnpCtrlQuerierRole | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.35 | swIGMPSnpCtrlQuerierIP | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.40 | swIGMPSnpCtrlQuerierExpiryTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.45 | swIGMPSnpCtrlState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.50 | swIGMPSnpCtrlFastLeaveState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.60 | swIGMPSnpCtrlVersion | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.65 | swIGMPSnpCtrlDataDrivenLearningState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.70 | swIGMPSnpCtrlDataDrivenLearningAgedOutState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.75 | swIGMPSnpCtrlDataDrivenGroupExpiryTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.80 | swIGMPSnpCtrlProxyReportingState | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.81 | swIGMPSnpCtrlProxyReportingSourceIP | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.82 | swIGMPSnpCtrlProxyReportingSourceIPStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.85 | swIGMPSnpCtrlReportSuppressionTime | 0 | 0 | |
| 1.3.6.1.4.1.171.12.73.3.1.1.1.90 | swIGMPSnpCtrlTopologyChangeNotification | 0 | 0 |