Specifies if the switch will change priorities of packets that match the access profile DSCP field or not.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.12.89.3.2.1.28
Specifies if the switch will change priorities of packets that match the access profile DSCP field or not.
Identification
{1 3 6 1 4 1 171 12 89 3 2 1 28}
| Value | Name |
|---|---|
| 1 | enabled |
| 2 | disabled |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In EGRESSACL-MIB, the row index consists of these components in order:
swEgressACLIpRuleProfileID (INTEGER): one numeric subidentifier for the non-negative value.swEgressACLIpRuleAccessID (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.171.12.89.3.2.1.28.<swEgressACLIpRuleProfileID>.<swEgressACLIpRuleAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.
Published row index: swEgressACLIpRuleProfileID, swEgressACLIpRuleAccessID.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.89.3.2.1.28
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
swEgressACLIpRuleEnableReplaceDscp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
"
::= { swEgressACLIpRuleEntry 28 }swEgressACLIpRuleEnableReplaceDscp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
"
::= { swEgressACLIpRuleEntry 28 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Specifies if the switch will change priorities of packets that match the access profile DSCP field or not.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: swEgressACLIpRuleEnableReplaceDscp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"swEgressACLIpRuleEnableReplaceDscp",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies if the switch will change priorities of packets that match the access profile DSCP field or not. \"",
"::=",
"{",
"swEgressACLIpRuleEntry",
"28",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies if the switch will change priorities of packets that match the access profile DSCP field or not."
],
null,
null,
null,
null
]
}Module: EGRESSACL-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DWS3160_MIB_new_01.04.2015.zip.
Same file in DGS-3620_Series_FW_v2.50.017_MIB.7z.
Same file in DGS-3620_Series_FW_v2.00.015_MIB.zip.
Module: EGRESSACL-MIB
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Same file in DGS-3620_Series_FW_v2.60.016_MIB.7z.
Same file in DGS-3620-r3.0-mib-20171011.zip.
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: EGRESSACL-MIB
See published definition above
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['Counter32', 'Counter64', 'TimeTicks', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32'], 'RFC1213-MIB': ['DisplayString'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlink-common-mgmt'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.89.3.2.1.1 | swEgressACLIpRuleProfileID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.2 | swEgressACLIpRuleAccessID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.3 | swEgressACLIpRuleRowStatus | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.4 | swEgressACLIpRuleMatchVID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.5 | swEgressACLIpMatchVlanMask | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.6 | swEgressACLIpRuleSrcIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.7 | swEgressACLIpRuleMaskSrcIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.8 | swEgressACLIpRuleDstIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.9 | swEgressACLIpRuleMaskDstIpaddress | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.10 | swEgressACLIpRuleDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.11 | swEgressACLIpRuleProtocol | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.12 | swEgressACLIpRuleType | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.13 | swEgressACLIpRuleCode | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.14 | swEgressACLIpRuleSrcPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.15 | swEgressACLIpRuleMaskSrcPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.16 | swEgressACLIpRuleDstPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.17 | swEgressACLIpRuleMaskDstPort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.18 | swEgressACLIpRuleFlagBits | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.19 | swEgressACLIpRuleProtoID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.20 | swEgressACLIpRuleUserDefine | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.21 | swEgressACLIpRuleUserDefineMask | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.22 | swEgressACLIpRuleVID | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.23 | swEgressACLIpRulePort | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.24 | swEgressACLIpRulePortGroup | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.25 | swEgressACLIpRulePermit | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.26 | swEgressACLIpRuleEnableReplacePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.27 | swEgressACLIpRuleReplacePriority | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.29 | swEgressACLIpRuleReplaceDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.30 | swEgressAclIpRuleTimeRangeName | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.31 | swEgressACLIpRuleEnableReplaceVlanId | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.32 | swEgressACLIpRuleReplaceVlanId | 0 | 0 | |
| 1.3.6.1.4.1.171.12.89.3.2.1.33 | swEgressACLIpRuleMatchMirror | 0 | 0 |