OID reference

swACLPktContRuleOptionPermit

1.3.6.1.4.1.171.12.9.3.7.1.16

Description

This object indicates the result of the packet examination is either to 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded b…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.171.12.9.3.7.1 (swACLPktContRuleOptionEntry)
Node code
16
Node name
swACLPktContRuleOptionPermit
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.171.12.9.3.7.1.16
URN notation
urn:oid:1.3.6.1.4.1.171.12.9.3.7.1.16
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 171 12 9 3 7 1 16}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) nmsModules(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) dlink(171) nmsModules(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) nmsModules(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) d-link(171) nmsModules(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) nmsModules(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) company(171) nmsModules(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) dlink-common-mgmt(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) nmsModules(12) swAclMgmtMIB(9) swAclCtrl(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) my(171) nmsModules(12) swAclMgmtMIB(9) swAclRuleMgmt(3) swACLPktContRuleOptionTable(7) swACLPktContRuleOptionEntry(1) swACLPktContRuleOptionPermit(16)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/171/12/9/3/7/1/16
  • /ISO/Identified-Organization/6/1/4/1/171/12/9/3/7/1/16
  • /ISO/3/6/1/4/1/171/12/9/3/7/1/16
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-common-mgmt/swAclMgmtMIB/swAclCtrl/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/dlink-common-mgmt/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/nmsModules/swAclMgmtMIB/swAclCtrl/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/dlink/nmsModules/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-common-mgmt/swAclMgmtMIB/swAclCtrl/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/dlink-common-mgmt/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/nmsModules/swAclMgmtMIB/swAclCtrl/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/d-link/nmsModules/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/company/dlink-common-mgmt/swAclMgmtMIB/swAclCtrl/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/company/dlink-common-mgmt/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/company/nmsModules/swAclMgmtMIB/swAclCtrl/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/company/nmsModules/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/my/dlink-common-mgmt/swAclMgmtMIB/swAclCtrl/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/my/dlink-common-mgmt/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/my/nmsModules/swAclMgmtMIB/swAclCtrl/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • /iso/identified-organization/dod/internet/private/enterprise/my/nmsModules/swAclMgmtMIB/swAclRuleMgmt/swACLPktContRuleOptionTable/swACLPktContRuleOptionEntry/swACLPktContRuleOptionPermit
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current

Definitions may combine these properties differently.

Compare 3 source variants

Variant 1 — D-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current

Variant 2 — D-Link official switch MIBs

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current

Variant 3 — D-Link official switch MIBs

Value type
INTEGER
Maximum access defined by MIB
read-create
Status in MIB
current

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

ValueNameSource variants
1deny1, 2, 3
2permit1, 2, 3
3mirror1, 2, 3
4rspan2
6redirect3

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In ACLMGMT-MIB, the row index consists of these components in order:

  1. swACLPktContRuleOptionProfileID (INTEGER): one numeric subidentifier for the non-negative value.
  2. swACLPktContRuleOptionAccessID (INTEGER): one numeric subidentifier for the non-negative value.

An instance has the form .1.3.6.1.4.1.171.12.9.3.7.1.16.<swACLPktContRuleOptionProfileID>.<swACLPktContRuleOptionAccessID>. Use values present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.12.9.3.7.1.16

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 7 distinct definitions; some records may not include a definition.

Show 7 published definitions

swACLPktContRuleOptionPermit · current

swACLPktContRuleOptionPermit OBJECT-TYPE
        SYNTAX  INTEGER {
               deny(1),
               permit(2),
               mirror(3)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
	    "This object indicates the result of the packet examination is either to 'permit' or 'deny'.
	     The default is 'permit'.
             permit - Specifies that packets that match the access profile are
                      permitted to be forwarded by the switch.
             deny - Specifies that packets that match the access profile
                    are not permitted to be forwarded by the switch and will be filtered.
             mirror - Specifies the packets that match the access profile are copied to
                      the mirror port.
                      Note: The ACL mirror function will function after mirror is enabled
                      and a mirror port has been configured."
        ::= { swACLPktContRuleOptionEntry 16 }

swACLPktContRuleOptionPermit · current

swACLPktContRuleOptionPermit OBJECT-TYPE
        SYNTAX  INTEGER {
               deny(1),
               permit(2),
               mirror(3)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
	    "This object indicates the result of the packet examination is either to permit or deny.
	     The default is permit.
             permit - Specifies that packets that match the access profile are
                      permitted to be forwarded by the switch.
             deny - Specifies that packets that match the access profile
                    are not permitted to be forwarded by the switch and will be filtered.
             mirror - Specifies the packets that match the access profile are copied to
                      the mirror port.
                      Note : The ACL mirror function will function after mirror is enabled
                      and a mirror port has been configured."
        ::= { swACLPktContRuleOptionEntry 16 }

swACLPktContRuleOptionPermit · current

swACLPktContRuleOptionPermit OBJECT-TYPE
        SYNTAX  INTEGER {
               deny(1),
               permit(2),
               mirror(3)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates if the result of the packet examination is 'permit' or 'deny'.
             The default is 'permit'.
             permit - Specifies that packets that match the access profile are
                      permitted to be forwarded by the switch.
             deny - Specifies that packets that match the access profile
                    are not permitted to be forwarded by the switch and will be filtered.
             mirror - Specifies that the packets that match the access profile are copied to
                      the mirror port.
                      Note: The ACL mirror function will function after mirror is enabled
                      and a mirror port has been configured."
        ::= { swACLPktContRuleOptionEntry 16 }

swACLPktContRuleOptionPermit · current

swACLPktContRuleOptionPermit OBJECT-TYPE
        SYNTAX  INTEGER {
               deny(1),
               permit(2),
               mirror(3)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
	    "This object indicates if the result of the packet examination is 'permit' or 'deny'.
	     The default is 'permit'.
             permit - Specifies that packets that match the access profile are
                      permitted to be forwarded by the switch.
             deny - Specifies that packets that match the access profile
                    are not permitted to be forwarded by the switch and will be filtered.
             mirror - Specifies that the packets that match the access profile are copied to
                      the mirror port.
                      Note: The ACL mirror function will function after mirror is enabled
                      and a mirror port has been configured."
        ::= { swACLPktContRuleOptionEntry 16 }

swACLPktContRuleOptionPermit · current

swACLPktContRuleOptionPermit OBJECT-TYPE
        SYNTAX  INTEGER {
               deny(1),
               permit(2),
               mirror(3)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates if the result of the packet examination is 'permit' or 'deny'.
             The default is 'permit'.
             permit - Specifies that packets that match the access profile are
                      permitted to be forwarded by the switch.
             deny - Specifies that packets that match the access profile
                    are not permitted to be forwarded by the switch and will be filtered.
             mirror - Specifies that the packets that match the access profile are copied to
                      the mirror port.
                      Note: The ACL mirror function will function after mirror is enabled
                      and a mirror port has been configured."
        ::= { swACLPktContRuleOptionEntry 16 }

swACLPktContRuleOptionPermit · current

swACLPktContRuleOptionPermit OBJECT-TYPE
        SYNTAX  INTEGER {
               deny(1),
               permit(2),
               mirror(3),
               rspan(4)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates if the result of the packet examination is 'permit' or 'deny'.
             The default is 'permit'.
             permit - Specifies that packets that match the access profile are
                      permitted to be forwarded by the switch.
             deny - Specifies that packets that match the access profile
                    are not permitted to be forwarded by the switch and will be filtered.
             mirror - Specifies that the packets that match the access profile are copied to
                      the mirror port.
                      Note: The ACL mirror function will function after mirror is enabled
                      and a mirror port has been configured.
             rspan - Specifies the packets that match the access profile are sent the copied one to RSPAN vlan. 
             		 This option is apply for per flow RSPAN on source switch."
        ::= { swACLPktContRuleOptionEntry 16 }

swACLPktContRuleOptionPermit · current

swACLPktContRuleOptionPermit OBJECT-TYPE
        SYNTAX  INTEGER {
               deny(1),
               permit(2),
               mirror(3),
               redirect(6)
               }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
            "This object indicates if the result of the packet examination is 'permit' or 'deny'.
             The default is 'permit'.
             permit - Specifies that packets that match the access profile are
                      permitted to be forwarded by the switch.
             deny - Specifies that packets that match the access profile
                    are not permitted to be forwarded by the switch and will be filtered.
             mirror - Specifies that the packets that match the access profile are copied to
                      the mirror port.
                      Note: The ACL mirror function will function after mirror is enabled
                      and a mirror port has been configured.
             redirect - Specifies that packets matching the access profile are redirect to interface.
                        Note : The ACL redirect function will start functioning after redirect has been enabled
                             and the redirect port has been configured."
        ::= { swACLPktContRuleOptionEntry 16 }

Meaning

Descriptions

5 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

This object indicates the result of the packet examination is either to 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 2

This object indicates the result of the packet examination is either to permit or deny. The default is permit. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies the packets that match the access profile are copied to the mirror port. Note : The ACL mirror function will function after mirror is enabled and a mirror port has been configured.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 3

This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies that the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured.

Sources for this description

D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 4

This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies that the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured. rspan - Specifies the packets that match the access profile are sent the copied one to RSPAN vlan. This option is apply for per flow RSPAN on source switch.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Description 5

This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies that the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured. redirect - Specifies that packets matching the access profile are redirect to interface. Note : The ACL redirect function will start functioning after redirect has been enabled and the redirect port has been configured.

Sources for this description

D-Link official switch MIBs

See 1 matching source record

Evidence

Source records

5 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1D-Link official switch MIBs1 record · 1 source

Description 1

swACLPktContRuleOptionPermit · currentD-Link official switch MIBs1 source

Status in source: current.

Names: swACLPktContRuleOptionPermit

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleOptionPermit",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "deny",
    "(",
    "1",
    ")",
    ",",
    "permit",
    "(",
    "2",
    ")",
    ",",
    "mirror",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object indicates the result of the packet examination is either to 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured.\"",
    "::=",
    "{",
    "swACLPktContRuleOptionEntry",
    "16",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "deny",
            1
          ],
          [
            "permit",
            2
          ],
          [
            "mirror",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object indicates the result of the packet examination is either to 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 2D-Link official switch MIBs1 record · 2 sources

Description 2

swACLPktContRuleOptionPermit · currentD-Link official switch MIBs2 sources

Status in source: current.

Names: swACLPktContRuleOptionPermit

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleOptionPermit",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "deny",
    "(",
    "1",
    ")",
    ",",
    "permit",
    "(",
    "2",
    ")",
    ",",
    "mirror",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object indicates the result of the packet examination is either to permit or deny. The default is permit. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies the packets that match the access profile are copied to the mirror port. Note : The ACL mirror function will function after mirror is enabled and a mirror port has been configured.\"",
    "::=",
    "{",
    "swACLPktContRuleOptionEntry",
    "16",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "deny",
            1
          ],
          [
            "permit",
            2
          ],
          [
            "mirror",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object indicates the result of the packet examination is either to permit or deny. The default is permit. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies the packets that match the access profile are copied to the mirror port. Note : The ACL mirror function will function after mirror is enabled and a mirror port has been configured."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 3D-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)1 record · 11 sources

Description 3

swACLPktContRuleOptionPermit · currentD-Link official switch MIBs, D-Link MIB copies (LibreNMS/Observium Community)11 sources

Status in source: current.

Names: swACLPktContRuleOptionPermit

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleOptionPermit",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "deny",
    "(",
    "1",
    ")",
    ",",
    "permit",
    "(",
    "2",
    ")",
    ",",
    "mirror",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies that the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured.\"",
    "::=",
    "{",
    "swACLPktContRuleOptionEntry",
    "16",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "deny",
            1
          ],
          [
            "permit",
            2
          ],
          [
            "mirror",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies that the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured."
    ],
    null,
    null,
    null,
    null
  ]
}

Browse all 11 supporting sources

Records for description 4D-Link official switch MIBs1 record · 2 sources

Description 4

swACLPktContRuleOptionPermit · currentD-Link official switch MIBs2 sources

Status in source: current.

Names: swACLPktContRuleOptionPermit

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleOptionPermit",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "deny",
    "(",
    "1",
    ")",
    ",",
    "permit",
    "(",
    "2",
    ")",
    ",",
    "mirror",
    "(",
    "3",
    ")",
    ",",
    "rspan",
    "(",
    "4",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies that the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured. rspan - Specifies the packets that match the access profile are sent the copied one to RSPAN vlan. This option is apply for per flow RSPAN on source switch.\"",
    "::=",
    "{",
    "swACLPktContRuleOptionEntry",
    "16",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "deny",
            1
          ],
          [
            "permit",
            2
          ],
          [
            "mirror",
            3
          ],
          [
            "rspan",
            4
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies that the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured. rspan - Specifies the packets that match the access profile are sent the copied one to RSPAN vlan. This option is apply for per flow RSPAN on source switch."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 5D-Link official switch MIBs1 record · 3 sources

Description 5

swACLPktContRuleOptionPermit · currentD-Link official switch MIBs3 sources

Status in source: current.

Names: swACLPktContRuleOptionPermit

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "swACLPktContRuleOptionPermit",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "deny",
    "(",
    "1",
    ")",
    ",",
    "permit",
    "(",
    "2",
    ")",
    ",",
    "mirror",
    "(",
    "3",
    ")",
    ",",
    "redirect",
    "(",
    "6",
    ")",
    "}",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies that the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured. redirect - Specifies that packets matching the access profile are redirect to interface. Note : The ACL redirect function will start functioning after redirect has been enabled and the redirect port has been configured.\"",
    "::=",
    "{",
    "swACLPktContRuleOptionEntry",
    "16",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "deny",
            1
          ],
          [
            "permit",
            2
          ],
          [
            "mirror",
            3
          ],
          [
            "redirect",
            6
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object indicates if the result of the packet examination is 'permit' or 'deny'. The default is 'permit'. permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that match the access profile are not permitted to be forwarded by the switch and will be filtered. mirror - Specifies that the packets that match the access profile are copied to the mirror port. Note: The ACL mirror function will function after mirror is enabled and a mirror port has been configured. redirect - Specifies that packets matching the access profile are redirect to interface. Note : The ACL redirect function will start functioning after redirect has been enabled and the redirect port has been configured."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.171)

Henry P. Nagai

Siblings (29)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.171.12.9.3.7.1.1 swACLPktContRuleOptionProfileID00
1.3.6.1.4.1.171.12.9.3.7.1.2 swACLPktContRuleOptionAccessID00
1.3.6.1.4.1.171.12.9.3.7.1.3 swACLPktContRuleOffsetChunk1OffsetValue00
1.3.6.1.4.1.171.12.9.3.7.1.4 swACLPktContRuleOffsetChunk1Content00
1.3.6.1.4.1.171.12.9.3.7.1.5 swACLPktContRuleOffsetChunk2OffsetValue00
1.3.6.1.4.1.171.12.9.3.7.1.6 swACLPktContRuleOffsetChunk2Content00
1.3.6.1.4.1.171.12.9.3.7.1.7 swACLPktContRuleOffsetChunk3OffsetValue00
1.3.6.1.4.1.171.12.9.3.7.1.8 swACLPktContRuleOffsetChunk3Content00
1.3.6.1.4.1.171.12.9.3.7.1.9 swACLPktContRuleOffsetChunk4OffsetValue00
1.3.6.1.4.1.171.12.9.3.7.1.10 swACLPktContRuleOffsetChunk4Content00
1.3.6.1.4.1.171.12.9.3.7.1.11 swACLPktContRuleOptionEnablePriority00
1.3.6.1.4.1.171.12.9.3.7.1.12 swACLPktContRuleOptionPriority00
1.3.6.1.4.1.171.12.9.3.7.1.13 swACLPktContRuleOptionReplacePriority00
1.3.6.1.4.1.171.12.9.3.7.1.14 swACLPktContRuleOptionEnableReplaceDscp00
1.3.6.1.4.1.171.12.9.3.7.1.15 swACLPktContRuleOptionRepDscp00
1.3.6.1.4.1.171.12.9.3.7.1.17 swACLPktContRuleOptionPort00
1.3.6.1.4.1.171.12.9.3.7.1.18 swACLPktContRuleOptionRowStatus00
1.3.6.1.4.1.171.12.9.3.7.1.19 swACLPktContRuleOptionOwner00
1.3.6.1.4.1.171.12.9.3.7.1.20 swACLPktContRuleOptionRxRate00
1.3.6.1.4.1.171.12.9.3.7.1.21 swACLPktContRuleOptionEnableReplaceTosPrecedence, swACLPktContRuleOptionTimeRangeName00
1.3.6.1.4.1.171.12.9.3.7.1.22 swACLPktContRuleOptionRepTosPrecedence, swACLPktContRuleOptionMirrorGroupID00
1.3.6.1.4.1.171.12.9.3.7.1.23 swACLPktContRuleOptionVID00
1.3.6.1.4.1.171.12.9.3.7.1.24 swACLPktContRuleOptionMirrorGroupID00
1.3.6.1.4.1.171.12.9.3.7.1.25 swACLPktContRuleOptionRedirectPort, swACLPktContRuleOptionRedirectEgressPort00
1.3.6.1.4.1.171.12.9.3.7.1.26 swACLPktContRuleOffsetChunk1Mask00
1.3.6.1.4.1.171.12.9.3.7.1.27 swACLPktContRuleOffsetChunk2Mask00
1.3.6.1.4.1.171.12.9.3.7.1.28 swACLPktContRuleOffsetChunk3Mask00
1.3.6.1.4.1.171.12.9.3.7.1.29 swACLPktContRuleOffsetChunk4Mask00
1.3.6.1.4.1.171.12.9.3.7.1.30 swACLPktContRuleOptionURPFStateCheck00