OID reference
1.3.6.1.4.1.171.14.13.1.2.5
This object indicates the interval for periodic writing of the logging buffer to FLASH. The valid value is N to 65535. N is project dependent. The default interval is 300 seconds. Setting this object to -1 means infinite which will disable periodical writing logging buffer to FLASH. Setting this object to 0 means writ…
Identification
{1 3 6 1 4 1 171 14 13 1 2 5}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.14.13.1.2.5.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dSyslogLogBufWriteDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the interval for periodic writing of the
logging buffer to FLASH. The valid value is N to 65535.
N is project dependent. The default interval is 300 seconds.
Setting this object to -1 means infinite which will disable
periodical writing logging buffer to FLASH.
Setting this object to 0 means writing logging buffer
to flash by trigger way.
"
::= { dSyslogLogbuffer 5 }dSyslogLogBufWriteDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the interval for periodic writing of the
logging buffer to FLASH. The valid value is N to 65535.
N is project dependent. The default interval is 300 seconds.
Setting this object to -1 means infinite which will disable
periodical writing logging buffer to FLASH.
Setting this object to 0 means writing logging buffer
to flash by trigger way.
"
::= { dSyslogLogbuffer 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates the interval for periodic writing of the logging buffer to FLASH. The valid value is N to 65535. N is project dependent. The default interval is 300 seconds. Setting this object to -1 means infinite which will disable periodical writing logging buffer to FLASH. Setting this object to 0 means writing logging buffer to flash by trigger way.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dSyslogLogBufWriteDelay
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dSyslogLogBufWriteDelay",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the interval for periodic writing of the logging buffer to FLASH. The valid value is N to 65535. N is project dependent. The default interval is 300 seconds. Setting this object to -1 means infinite which will disable periodical writing logging buffer to FLASH. Setting this object to 0 means writing logging buffer to flash by trigger way. \"",
"::=",
"{",
"dSyslogLogbuffer",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the interval for periodic writing of the logging buffer to FLASH. The valid value is N to 65535. N is project dependent. The default interval is 300 seconds. Setting this object to -1 means infinite which will disable periodical writing logging buffer to FLASH. Setting this object to 0 means writing logging buffer to flash by trigger way."
],
null,
null,
null,
null
]
}Module: DLINKSW-SYSLOG-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SYSLOG-TC-MIB': ['SyslogFacility', 'SyslogSeverity'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in DXS-1100-R1.10-mibs-20161221.zip.
Same file in DXS-1100-R1.10-mibs-20161221.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Module: DLINKSW-SYSLOG-MIB
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SYSLOG-TC-MIB': ['SyslogFacility', 'SyslogSeverity'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in DGS-1520_MIB_20200430.zip.
Same file in DGS-1520_MIB_20200430.zip.
Module: DLINKSW-SYSLOG-MIB
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SYSLOG-TC-MIB': ['SyslogFacility', 'SyslogSeverity'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in DGS-3620R_1.52_MIB.7z.
Same file in DGS-3620R_1.52_MIB.7z.
Same file in DGS-3620R_1.52_MIB.7z.
Same file in DGS-3620R_1.52_MIB.7z.
Module: DLINKSW-SYSLOG-MIB
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SYSLOG-TC-MIB': ['SyslogFacility', 'SyslogSeverity'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Module: DLINKSW-SYSLOG-MIB
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SYSLOG-TC-MIB': ['SyslogFacility', 'SyslogSeverity'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS3400_MIB_20181212.zip.
Same file in DXS-3400_MIB_R2.0.zip.
Module: DLINKSW-SYSLOG-MIB
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SYSLOG-TC-MIB': ['SyslogFacility', 'SyslogSeverity'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DXS-1210-R1.00-MIB-20200515.7z.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-SYSLOG-MIB
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SYSLOG-TC-MIB': ['SyslogFacility', 'SyslogSeverity'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DLINKSW-SYSLOG-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SYSLOG-TC-MIB': ['SyslogFacility', 'SyslogSeverity'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: DLINKSW-SYSLOG-MIB
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DateAndTime', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SYSLOG-TC-MIB': ['SyslogFacility', 'SyslogSeverity'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.13.1.2.1 | dSyslogClearLogBuffer | 0 | 0 | |
| 1.3.6.1.4.1.171.14.13.1.2.2 | dSyslogLogBufferEnabled | 0 | 0 | |
| 1.3.6.1.4.1.171.14.13.1.2.3 | dSyslogLogBufSeverity | 0 | 0 | |
| 1.3.6.1.4.1.171.14.13.1.2.4 | dSyslogLogBufDiscriminator | 0 | 0 | |
| 1.3.6.1.4.1.171.14.13.1.2.6 | dSyslogClearAttackLogBufByUnit | 0 | 0 |