This object indicates the number of calculated checksum value does not equal the stored checksum.
Sources for this description
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.171.14.131.1.2.9.6
This object indicates the number of calculated checksum value does not equal the stored checksum.
Identification
{1 3 6 1 4 1 171 14 131 1 2 9 6}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.14.131.1.2.9.6.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
dDhcpSnpStatChecksumErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of calculated checksum value does
not equal the stored checksum."
::= { dDhcpSnpDbLastIgnoredCounters 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates the number of calculated checksum value does not equal the stored checksum.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dDhcpSnpStatChecksumErrors
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dDhcpSnpStatChecksumErrors",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the number of calculated checksum value does not equal the stored checksum.\"",
"::=",
"{",
"dDhcpSnpDbLastIgnoredCounters",
"6",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the number of calculated checksum value does not equal the stored checksum."
],
null,
null,
null,
null
]
}Module: DLINKSW-DHCP-SNOOPING-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'TruthValue', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DGS-1520_MIB_20200430.zip.
Same file in DGS-1520_MIB_20200430.zip.
Same file in DGS-1520_MIB_20200430.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Module: DLINKSW-DHCP-SNOOPING-MIB
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'TruthValue', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DXS3400_MIB_20181212.zip.
Same file in DXS-3400_MIB_R2.0.zip.
Same file in DXS-3400_MIB_R1.00.B040.zip.
Module: DLINKSW-DHCP-SNOOPING-MIB
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'TruthValue', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DXS-3600_32S_MIB_R2.40.zip.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-DHCP-SNOOPING-MIB
{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['MacAddress', 'TruthValue', 'RowStatus', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIdOrNone'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.131.1.2.9.1 | dDhcpSnpStatBindingCollision | 0 | 0 | |
| 1.3.6.1.4.1.171.14.131.1.2.9.2 | dDhcpSnpStatExpiredLease | 0 | 0 | |
| 1.3.6.1.4.1.171.14.131.1.2.9.3 | dDhcpSnpStatInvalidInterfaces | 0 | 0 | |
| 1.3.6.1.4.1.171.14.131.1.2.9.4 | dDhcpSnpStatUnsupportedVlans | 0 | 0 | |
| 1.3.6.1.4.1.171.14.131.1.2.9.5 | dDhcpSnpStatParsingFailures | 0 | 0 |