OID reference
1.3.6.1.4.1.171.14.166.1.2.1.1
This object indicates the LSR ID type for MPLS LDP. auto - LDP will auto select the router ID. If LDP is running, LSR ID will not be auto-changed. manual - Specifies the IPv4 address that will be used as LSR ID. The IPv4 address must be an IP address of an existed interface
Identification
{1 3 6 1 4 1 171 14 166 1 2 1 1}
| Value | Name |
|---|---|
| 1 | auto |
| 2 | manual |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.14.166.1.2.1.1.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dMplsLdpLsrIdType OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the LSR ID type for MPLS LDP.
auto - LDP will auto select the router ID. If LDP is running,
LSR ID will not be auto-changed.
manual - Specifies the IPv4 address that will be used as LSR ID.
The IPv4 address must be an IP address of an existed
interface"
::= { dMplsLdpGlobalMgmt 1 }dMplsLdpLsrIdKind OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the LSR ID kind for MPLS LDP.
auto - LDP will auto select the router ID. If LDP is running,
LSR ID will not be auto-changed.
manual - Specifies the IPv4 address that will be used as LSR ID.
The IPv4 address must be an IP address of an existed
interface"
::= { dMplsLdpGlobalMgmt 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object indicates the LSR ID type for MPLS LDP. auto - LDP will auto select the router ID. If LDP is running, LSR ID will not be auto-changed. manual - Specifies the IPv4 address that will be used as LSR ID. The IPv4 address must be an IP address of an existed interface
Description 2
This object indicates the LSR ID kind for MPLS LDP. auto - LDP will auto select the router ID. If LDP is running, LSR ID will not be auto-changed. manual - Specifies the IPv4 address that will be used as LSR ID. The IPv4 address must be an IP address of an existed interface
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dMplsLdpLsrIdType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dMplsLdpLsrIdType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"auto",
"(",
"1",
")",
",",
"manual",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the LSR ID type for MPLS LDP. auto - LDP will auto select the router ID. If LDP is running, LSR ID will not be auto-changed. manual - Specifies the IPv4 address that will be used as LSR ID. The IPv4 address must be an IP address of an existed interface\"",
"::=",
"{",
"dMplsLdpGlobalMgmt",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"auto",
1
],
[
"manual",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the LSR ID type for MPLS LDP. auto - LDP will auto select the router ID. If LDP is running, LSR ID will not be auto-changed. manual - Specifies the IPv4 address that will be used as LSR ID. The IPv4 address must be an IP address of an existed interface"
],
null,
null,
null,
null
]
}Module: DLINKSW-MPLS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'MPLS-TC-STD-MIB': ['MplsLabelDistributionMethod', 'MplsLabel', 'MplsOwner'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: dMplsLdpLsrIdKind
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dMplsLdpLsrIdKind",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"auto",
"(",
"1",
")",
",",
"manual",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the LSR ID kind for MPLS LDP. auto - LDP will auto select the router ID. If LDP is running, LSR ID will not be auto-changed. manual - Specifies the IPv4 address that will be used as LSR ID. The IPv4 address must be an IP address of an existed interface\"",
"::=",
"{",
"dMplsLdpGlobalMgmt",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"auto",
1
],
[
"manual",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the LSR ID kind for MPLS LDP. auto - LDP will auto select the router ID. If LDP is running, LSR ID will not be auto-changed. manual - Specifies the IPv4 address that will be used as LSR ID. The IPv4 address must be an IP address of an existed interface"
],
null,
null,
null,
null
]
}Module: DLINKSW-MPLS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'MPLS-TC-STD-MIB': ['MplsLabelDistributionMethod', 'MplsLabel', 'MplsOwner'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.166.1.2.1.2 | dMplsLdpLsrId | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.3 | dMplsLdpTrapState | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.4 | dMplsLdpTransportAddrKind, dMplsLdpTransportAddrType | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.5 | dMplsLdpTransportAddr | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.6 | dMplsLdpLspControlMode | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.7 | dMplsLdpBackOffInitTime | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.8 | dMplsLdpBackOffMaxTime | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.9 | dMplsLdpLinkHelloInterval | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.10 | dMplsLdpLoopDetection | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.11 | dMplsLdpPhp | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.12 | dMplsLdpMd5Authentication | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.13 | dMplsLdpGRState | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.14 | dMplsLdpGRMaxRecoveryTime | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.15 | dMplsLdpGRNeighborLivenessTime | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.16 | dMplsLdpDiscoveryHelloAddrKind | 0 | 0 | |
| 1.3.6.1.4.1.171.14.166.1.2.1.17 | dMplsLdpDiscoveryHelloAddr | 0 | 0 |