OID reference
1.3.6.1.4.1.171.14.21.1.4.1.8
This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'trunk'.
Identification
{1 3 6 1 4 1 171 14 21 1 4 1 8}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dVlanPortIfUntagAllowVlanLstSecond2K OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VLANs in a string of octets containing
one bit per VLAN for VLANs 2049 to 4094.
If the bit is set to '1', then the interface is allowed to be the
VLAN's untagged member.
Note: This value is meaningful only when the VLAN mode of the port
is 'hybrid' or 'trunk'."
::= { dVlanPortIfCtrlEntry 8 }dVlanPortIfUntagAllowVlanLstSecond2K OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VLANs in a string of octets containing
one bit per VLAN for VLANs 2049 to 4094.
If the bit is set to '1', then the interface is allowed to be the
VLAN's untagged member.
Note: This value is meaningful only when the VLAN mode of the port
is 'hybrid' or 'dot1qTunnel'."
::= { dVlanPortIfCtrlEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'trunk'.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Description 2
This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'dot1qTunnel'.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dVlanPortIfUntagAllowVlanLstSecond2K
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dVlanPortIfUntagAllowVlanLstSecond2K",
"OBJECT-TYPE",
"SYNTAX",
"Dlink2kVlanList",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'trunk'.\"",
"::=",
"{",
"dVlanPortIfCtrlEntry",
"8",
"}"
],
"syntax_tree": [
[
"row",
"Dlink2kVlanList"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'trunk'."
],
null,
null,
null,
null
]
}Module: DLINKSW-VLAN-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'dot1vProtocolPortGroupId'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS-1100-R1.10-mibs-20161221.zip.
Same file in DXS-1100-R1.10-mibs-20161221.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Module: DLINKSW-VLAN-MIB
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'dot1vProtocolPortGroupId'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS-1210-R1.00-MIB-20200515.7z.
Same file in DXS-1210-R1.00-MIB-20200515.7z.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-VLAN-MIB
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'dot1vProtocolPortGroupId'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Status in source: current.
Names: dVlanPortIfUntagAllowVlanLstSecond2K
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dVlanPortIfUntagAllowVlanLstSecond2K",
"OBJECT-TYPE",
"SYNTAX",
"Dlink2kVlanList",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'dot1qTunnel'.\"",
"::=",
"{",
"dVlanPortIfCtrlEntry",
"8",
"}"
],
"syntax_tree": [
[
"row",
"Dlink2kVlanList"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the VLANs in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the interface is allowed to be the VLAN's untagged member. Note: This value is meaningful only when the VLAN mode of the port is 'hybrid' or 'dot1qTunnel'."
],
null,
null,
null,
null
]
}Module: DLINKSW-VLAN-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['dot1dBasePort'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId', 'dot1vProtocolPortGroupId'], 'DLINKSW-TC-MIB': ['Dlink2kVlanList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetAddressPrefixLength']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DXS3400_MIB_20181212.zip.
Same file in DXS-3400_MIB_R2.0.zip.
Same file in DXS-3400_MIB_R1.00.B040.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.21.1.4.1.1 | dVlanPortIfMode | 0 | 0 | |
| 1.3.6.1.4.1.171.14.21.1.4.1.2 | dVlanPortIfTrunkNativeVlanTagged | 0 | 0 | |
| 1.3.6.1.4.1.171.14.21.1.4.1.3 | dVlanPortIfAcceptableFrameTypes | 0 | 0 | |
| 1.3.6.1.4.1.171.14.21.1.4.1.4 | dVlanPortIfVlanPrecedence | 0 | 0 | |
| 1.3.6.1.4.1.171.14.21.1.4.1.5 | dVlanPortIfTagAllowVlanLstFirst2K | 0 | 0 | |
| 1.3.6.1.4.1.171.14.21.1.4.1.6 | dVlanPortIfTagAllowVlanLstSecond2K | 0 | 0 | |
| 1.3.6.1.4.1.171.14.21.1.4.1.7 | dVlanPortIfUntagAllowVlanLstFirst2K | 0 | 0 |