OID reference
1.3.6.1.4.1.171.14.24.1.3.1.1.2
This object indicates the max wattage value which can be provisioned to the port. Note: This object is valid only while the dPoeIfState object is configured as auto or static.
Identification
{1 3 6 1 4 1 171 14 24 1 3 1 1 2}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: pethMainPseGroupIndex, pethPsePortIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.14.24.1.3.1.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
dPoeIfMaxPower OBJECT-TYPE
SYNTAX Integer32( 0 | 1000..30000)
UNITS "milliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the max wattage value which can
be provisioned to the port.
Note: This object is valid only while the dPoeIfState
object is configured as auto or static."
::= { dPoeIfCfgEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates the max wattage value which can be provisioned to the port. Note: This object is valid only while the dPoeIfState object is configured as auto or static.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dPoeIfMaxPower
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dPoeIfMaxPower",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
"|",
"1000",
".",
".",
"30000",
")",
"UNITS",
[
"literal",
"226d696c6c69776174747322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the max wattage value which can be provisioned to the port. Note: This object is valid only while the dPoeIfState object is configured as auto or static.\"",
"::=",
"{",
"dPoeIfCfgEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0
],
[
1000,
30000
]
]
]
],
[
"UNITS",
"milliwatts"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the max wattage value which can be provisioned to the port. Note: This object is valid only while the dPoeIfState object is configured as auto or static."
],
null,
null,
null,
null
]
}Module: DLINKSW-POE-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'POWER-ETHERNET-MIB': ['pethMainPseGroupIndex', 'pethPsePortIndex', 'pethPsePortShortCounter', 'pethPsePortOverLoadCounter', 'pethPsePortPowerDeniedCounter']}Related source files and packages:
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Same file in DGS-1510_Series_A1_FW_v1.30.007_MIB.zip.
Module: DLINKSW-POE-MIB
{'SNMPv2-TC': ['DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'POWER-ETHERNET-MIB': ['pethMainPseGroupIndex', 'pethPsePortIndex', 'pethPsePortShortCounter', 'pethPsePortOverLoadCounter', 'pethPsePortPowerDeniedCounter']}Related source files and packages:
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Same file in DGS-1520_MIB_20200430.zip.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-POE-MIB
{'SNMPv2-TC': ['DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['PortList'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'POWER-ETHERNET-MIB': ['pethMainPseGroupIndex', 'pethPsePortIndex', 'pethPsePortShortCounter', 'pethPsePortOverLoadCounter', 'pethPsePortPowerDeniedCounter']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.24.1.3.1.1.1 | dPoeIfState | 0 | 0 | |
| 1.3.6.1.4.1.171.14.24.1.3.1.1.3 | dPoeIfTimeRange | 0 | 0 | |
| 1.3.6.1.4.1.171.14.24.1.3.1.1.4 | dPoeIfLegacyPdEnabled | 0 | 0 |