OID reference
1.3.6.1.4.1.171.14.55.1.7.1.3
This object indicates the Priority value to replace the Priority field of the protocol control packets. The value of -1 indicates the replacing Priority is not enabled.
Identification
{1 3 6 1 4 1 171 14 55 1 7 1 3}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DLINKSW-IPMCAST-EXT-MIB, the row index dIpmcExtCtrlPktRepPriPotocol is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.171.14.55.1.7.1.3.<dIpmcExtCtrlPktRepPriPotocol>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.171.14.55.1.7.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
dIpmcExtCtrlPktRepPriority OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the Priority value to replace the Priority
field of the protocol control packets.
The value of -1 indicates the replacing Priority is not enabled.
"
::= { dIpmcExtCtrlPktReplacePriEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object indicates the Priority value to replace the Priority field of the protocol control packets. The value of -1 indicates the replacing Priority is not enabled.
D-Link official switch MIBsD-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dIpmcExtCtrlPktRepPriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dIpmcExtCtrlPktRepPriority",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"1",
"|",
"0",
".",
".",
"7",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the Priority value to replace the Priority field of the protocol control packets. The value of -1 indicates the replacing Priority is not enabled. \"",
"::=",
"{",
"dIpmcExtCtrlPktReplacePriEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-1
],
[
0,
7
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the Priority value to replace the Priority field of the protocol control packets. The value of -1 indicates the replacing Priority is not enabled."
],
null,
null,
null,
null
]
}Module: DLINKSW-IPMCAST-EXT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetVersion']}Related source files and packages:
Same file in DXS-3610_A1_MIB_v1.01.zip.
Same file in DGS-3630_MIB_R1.00.zip.
Same file in DGS-3630-R2.0-MIB-20170927.zip.
Same file in DGS-3630_MIB_R1.00.zip.
Module: DLINKSW-IPMCAST-EXT-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetVersion']}Related source files and packages:
Same file in DMS_DXS3130_RUN_1.30.006_mibs.tar.bz2.
Same file in DMS_DXS3130_RUN_1.20.003_mibs.tar.bz2.
Same file in DMS_DXS3130_RUN_1.30.006_mibs.tar.bz2.
Same file in DMS_DXS3130_RUN_1.30.006_mibs.tar.bz2.
Module: DLINKSW-IPMCAST-EXT-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetVersion']}Related source files and packages:
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS-3600_32S_MIB_R2.40.zip.
Same file in DXS3400_MIB_20181212.zip.
Same file in DXS-3400_MIB_R2.0.zip.
Vendor MIB copy from the LibreNMS archive. D-Link support.
Module: DLINKSW-IPMCAST-EXT-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlinkIndustrialCommon'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetVersion']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.14.55.1.7.1.1 | dIpmcExtCtrlPktRepPriPotocol | 0 | 0 | |
| 1.3.6.1.4.1.171.14.55.1.7.1.2 | dIpmcExtCtrlPktRepDscp | 0 | 0 | |
| 1.3.6.1.4.1.171.14.55.1.7.1.99 | dIpmcExtCtrlPktRepPriRowStatus | 0 | 0 |