dStackBandwidth

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dStackBandwidth",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "twoPorts",
    "(",
    "1",
    ")",
    ",",
    "fourPorts",
    "(",
    "2",
    ")",
    ",",
    "twoPortFiber",
    "(",
    "3",
    ")",
    ",",
    "fourPortFiber",
    "(",
    "4",
    ")",
    ",",
    "twoPortCopper",
    "(",
    "5",
    ")",
    ",",
    "fourPortHybrid",
    "(",
    "6",
    ")",
    ",",
    "sixPorts",
    "(",
    "7",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object configures or indicates the stacking port configuration. It is product dependent to support either dStackSIO1Port/dStackSIO2Port or dStackBandwidth MIB object. The following two values correponds to stack bandwidth alternative I command. twoPorts(1) - two ports are configured as stacking ports. fourPorts(2) - four ports are configured as stacking ports. sixPorts(7) - six ports are configured as stacking ports. The following four values correponds to stack bandwidth alternative II command. twoPortFiber(3) - two fiber ports are configured as stacking ports. fourPortFiber(4) - four fiber ports are configured as stacking ports. twoPortCopper(5) - two 10g-base-t ports are configured as stacking ports. fourPortHybrid(6) - two 10g-base-t and two fiber ports are configured as stacking ports. The stacking port bandwidth setting of a switch device must be set before the switch unit can be chained with other switch devices. The setting will be saved on local switch unit if the user saves the configuration. The change of stacking port bandwidth will not take effect until the next reboot. \"",
    "::=",
    "{",
    "dStackMgmt",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "twoPorts",
            1
          ],
          [
            "fourPorts",
            2
          ],
          [
            "twoPortFiber",
            3
          ],
          [
            "fourPortFiber",
            4
          ],
          [
            "twoPortCopper",
            5
          ],
          [
            "fourPortHybrid",
            6
          ],
          [
            "sixPorts",
            7
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object configures or indicates the stacking port configuration. It is product dependent to support either dStackSIO1Port/dStackSIO2Port or dStackBandwidth MIB object. The following two values correponds to stack bandwidth alternative I command. twoPorts(1) - two ports are configured as stacking ports. fourPorts(2) - four ports are configured as stacking ports. sixPorts(7) - six ports are configured as stacking ports. The following four values correponds to stack bandwidth alternative II command. twoPortFiber(3) - two fiber ports are configured as stacking ports. fourPortFiber(4) - four fiber ports are configured as stacking ports. twoPortCopper(5) - two 10g-base-t ports are configured as stacking ports. fourPortHybrid(6) - two 10g-base-t and two fiber ports are configured as stacking ports. The stacking port bandwidth setting of a switch device must be set before the switch unit can be chained with other switch devices. The setting will be saved on local switch unit if the user saves the configuration. The change of stacking port bandwidth will not take effect until the next reboot."
    ],
    null,
    null,
    null,
    null
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dStackBandwidth",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "twoPorts",
    "(",
    "1",
    ")",
    ",",
    "fourPorts",
    "(",
    "2",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object indicates the stacking port bandwidth. twoPorts - two ports are used for stacking, each port works as a SIO port fourPorts - four ports are used for stacking, each two ports are aggregated together and work as a SIO port. The stacking port bandwidth setting of a switch device must be set before the switch unit can be chained with other switch devices. The setting will be saved on local switch unit if the user saves the configuration. The change of stacking port bandwidth will not take effect until the next reboot. \"",
    "DEFVAL",
    "{",
    "twoPorts",
    "}",
    "::=",
    "{",
    "dStackMgmt",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "twoPorts",
            1
          ],
          [
            "fourPorts",
            2
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object indicates the stacking port bandwidth. twoPorts - two ports are used for stacking, each port works as a SIO port fourPorts - four ports are used for stacking, each two ports are aggregated together and work as a SIO port. The stacking port bandwidth setting of a switch device must be set before the switch unit can be chained with other switch devices. The setting will be saved on local switch unit if the user saves the configuration. The change of stacking port bandwidth will not take effect until the next reboot."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "twoPorts"
    ]
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "dStackBandwidth",
    "OBJECT-TYPE",
    "SYNTAX",
    "DLinkStackBandwithOption",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The stacking port bandwidth setting of a switch device must be set before the switch unit can be chained with other switch devices. The setting will be saved on local switch unit if the user saves the configuration. The change of stacking port bandwidth will not take effect until the next reboot. \"",
    "::=",
    "{",
    "dStackMgmt",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "DLinkStackBandwithOption"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The stacking port bandwidth setting of a switch device must be set before the switch unit can be chained with other switch devices. The setting will be saved on local switch unit if the user saves the configuration. The change of stacking port bandwidth will not take effect until the next reboot."
    ],
    null,
    null,
    null,
    null
  ]
}