OID reference
1.3.6.1.4.1.171.15.22.1.5
When set to 'reboot_no_save', this object is used to only reboot the system. When set to 'save_reboot', this object is used to save system configuration and reboot the system. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.
Identification
{1 3 6 1 4 1 171 15 22 1 5}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | reboot_no_save | 1 |
| 1 | reset | 2 |
| 2 | noOp | 2 |
| 2 | save_reboot | 1 |
| 3 | noOp | 1 |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.171.15.22.1.5.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
dpsfRebootSystem OBJECT-TYPE
SYNTAX INTEGER {
reboot_no_save(1),
save_reboot(2),
noOp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to 'reboot_no_save', this object is used to
only reboot the system.
When set to 'save_reboot', this object is used to
save system configuration and reboot the system.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
::= { dpsfMIBObjects 5 }dpsfRebootSystem OBJECT-TYPE
SYNTAX INTEGER {
reboot_no_save(1),
save_reboot(2),
noOp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to 'reboot_no_save', this object is used to
only reboot the system.
When set to 'save_reboot', this object is used to
save system configuration and reboot the system.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
::= { dpsfMIBObjects 5 }dpsfResetSystem OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to reset system when set to 'reset'.
It will clear system configuration, save and reboot the system.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
::= { dpsfMIBObjects 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
When set to 'reboot_no_save', this object is used to only reboot the system. When set to 'save_reboot', this object is used to save system configuration and reboot the system. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.
Description 2
This object is used to reset system when set to 'reset'. It will clear system configuration, save and reboot the system. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.
D-Link MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dpsfRebootSystem
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpsfRebootSystem",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"reboot_no_save",
"(",
"1",
")",
",",
"save_reboot",
"(",
"2",
")",
",",
"noOp",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"When set to 'reboot_no_save', this object is used to only reboot the system. When set to 'save_reboot', this object is used to save system configuration and reboot the system. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.\"",
"::=",
"{",
"dpsfMIBObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"reboot_no_save",
1
],
[
"save_reboot",
2
],
[
"noOp",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"When set to 'reboot_no_save', this object is used to only reboot the system. When set to 'save_reboot', this object is used to save system configuration and reboot the system. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned."
],
null,
null,
null,
null
]
}Module: DLINKPRIME-SYSTEM-FILE-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Module: DLINKPRIME-SYSTEM-FILE-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Module: DLINKPRIME-SYSTEM-FILE-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Same file in DGS-1100-ME_1.00.B018_mib_file.zip.
Status in source: current.
Names: dpsfResetSystem
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpsfResetSystem",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"reset",
"(",
"1",
")",
",",
"noOp",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to reset system when set to 'reset'. It will clear system configuration, save and reboot the system. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned.\"",
"::=",
"{",
"dpsfMIBObjects",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"reset",
1
],
[
"noOp",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to reset system when set to 'reset'. It will clear system configuration, save and reboot the system. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. D-Link support.
Module: DLINKPRIME-SYSTEM-FILE-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.15.22.1.1 | dpsfBootInfoObjects | 4 | 7 | |
| 1.3.6.1.4.1.171.15.22.1.2 | dpsfCopyTable | 1 | 8 | |
| 1.3.6.1.4.1.171.15.22.1.3 | dpsfCfgReplaceTable | 1 | 7 | |
| 1.3.6.1.4.1.171.15.22.1.4 | dpsfClearRunCfg | 0 | 0 | |
| 1.3.6.1.4.1.171.15.22.1.6 | dpsfSaveRunCfg | 0 | 0 | |
| 1.3.6.1.4.1.171.15.22.1.7 | dpsfClearCountersTable | 1 | 3 |