OID reference
1.3.6.1.4.1.171.15.30.0.2.1.5
This object specifies the service protected VLANs of ERP instance in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the VLAN is configured to be protected by the Ethernet ring protection mechanism.
Identification
{1 3 6 1 4 1 171 15 30 0 2 1 5}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | port0 | 2 |
| 1 | port1 | 2 |
| 2 | none | 2 |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dpErpsInstIncludeVlansSecond2K OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the service protected VLANs of ERP instance
in a string of octets containing one bit per VLAN for VLANs 2049 to
4094.
If the bit is set to '1', then the VLAN is configured to be
protected by the Ethernet ring protection mechanism."
::= { dpErpsInstEntry 5 }dpErpsInstAdminRplPort OBJECT-TYPE
SYNTAX INTEGER {
port0(0),
port1(1),
none(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the administratively configured RPL port of
the entry.
port0(0) - Specify port0 as the RPL port.
port1(1) - Specify port1 as the RPL port.
none(2) - The RPL port is not specified.
"
::= { dpErpsInstEntry 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object specifies the service protected VLANs of ERP instance in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the VLAN is configured to be protected by the Ethernet ring protection mechanism.
Description 2
This object indicates the administratively configured RPL port of the entry. port0(0) - Specify port0 as the RPL port. port1(1) - Specify port1 as the RPL port. none(2) - The RPL port is not specified.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dpErpsInstIncludeVlansSecond2K
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpErpsInstIncludeVlansSecond2K",
"OBJECT-TYPE",
"SYNTAX",
"Dlink2kVlanList",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the service protected VLANs of ERP instance in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the VLAN is configured to be protected by the Ethernet ring protection mechanism.\"",
"::=",
"{",
"dpErpsInstEntry",
"5",
"}"
],
"syntax_tree": [
[
"row",
"Dlink2kVlanList"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the service protected VLANs of ERP instance in a string of octets containing one bit per VLAN for VLANs 2049 to 4094. If the bit is set to '1', then the VLAN is configured to be protected by the Ethernet ring protection mechanism."
],
null,
null,
null,
null
]
}Module: DLINKPRIME-ERPS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'DLINKPRIME-VLAN-MIB': ['Dlink2kVlanList']}Related source files and packages:
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Status in source: current.
Names: dpErpsInstAdminRplPort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpErpsInstAdminRplPort",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"port0",
"(",
"0",
")",
",",
"port1",
"(",
"1",
")",
",",
"none",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object indicates the administratively configured RPL port of the entry. port0(0) - Specify port0 as the RPL port. port1(1) - Specify port1 as the RPL port. none(2) - The RPL port is not specified. \"",
"::=",
"{",
"dpErpsInstEntry",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"port0",
0
],
[
"port1",
1
],
[
"none",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object indicates the administratively configured RPL port of the entry. port0(0) - Specify port0 as the RPL port. port1(1) - Specify port1 as the RPL port. none(2) - The RPL port is not specified."
],
null,
null,
null,
null
]
}Module: DLINKPRIME-ERPS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'Q-BRIDGE-MIB': ['VlanIdOrNone'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon'], 'DLINKPRIME-VLAN-MIB': ['Dlink2kVlanList']}Related source files and packages:
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.15.30.0.2.1.1 | dpErpsInstDescription | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.2 | dpErpsInstMel | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.3 | dpErpsInstApsChannelVlanId | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.4 | dpErpsInstIncludeVlansFirst2K, dpErpsInstIncludeVlans | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.6 | dpErpsInstAdminRplPort, dpErpsInstOperRplPort | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.7 | dpErpsInstOperRplPort, dpErpsInstAdminRplNodeRole | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.8 | dpErpsInstAdminRplNodeRole, dpErpsInstOperRplNodeRole | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.9 | dpErpsInstOperRplNodeRole, dpErpsInstOperPort0IfIdx | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.10 | dpErpsInstOperPort0IfIdx, dpErpsInstOperPort0State | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.11 | dpErpsInstOperPort0State, dpErpsInstOperPort1IfIdx | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.12 | dpErpsInstOperPort1IfIdx, dpErpsInstOperPort1State | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.13 | dpErpsInstOperPort1State, dpErpsInstAdminActivate | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.14 | dpErpsInstAdminActivate, dpErpsInstInstanceState | 0 | 0 | |
| 1.3.6.1.4.1.171.15.30.0.2.1.15 | dpErpsInstInstanceState | 0 | 0 |