Description 1
This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN is enabled for loopback detection.
OID reference
1.3.6.1.4.1.171.15.7.1.6.1
This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN is enabled for loopback detection.
Identification
{1 3 6 1 4 1 171 15 7 1 6 1}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dpLbdVlanCrlFirst2K OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the loopback detection enabled VLAN in a
string of octets containing one bit per VLAN for VLANs 1 to 2048.
If the bit is set to '1', then the VLAN is enabled for loopback
detection."
::= { dpLbdVlanCtrlObjects 1 }dpLbdVlanCrl OBJECT-TYPE
SYNTAX Dlink2kVlanList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the VLANs in a string of VLANs 1 to 4094.
A single vlan is separated by ',', for example: 2,4,6.
Continuous vlan is separated by '-', for example: 8-2048.
::= { dpLbdVlanCtrlObjects 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN is enabled for loopback detection.
Description 2
This object specifies the VLANs in a string of VLANs 1 to 4094. A single vlan is separated by ',', for example: 2,4,6. Continuous vlan is separated by '-', for example: 8-2048.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dpLbdVlanCrlFirst2K
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpLbdVlanCrlFirst2K",
"OBJECT-TYPE",
"SYNTAX",
"Dlink2kVlanList",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN is enabled for loopback detection.\"",
"::=",
"{",
"dpLbdVlanCtrlObjects",
"1",
"}"
],
"syntax_tree": [
[
"row",
"Dlink2kVlanList"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the loopback detection enabled VLAN in a string of octets containing one bit per VLAN for VLANs 1 to 2048. If the bit is set to '1', then the VLAN is enabled for loopback detection."
],
null,
null,
null,
null
]
}Module: DLINKPRIME-LBD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Same file in DGS-1100-MPMPP_1.01.B012_mib.zip.
Status in source: current.
Names: dpLbdVlanCrl
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dpLbdVlanCrl",
"OBJECT-TYPE",
"SYNTAX",
"Dlink2kVlanList",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"",
"This",
"object",
"specifies",
"the",
"VLANs",
"in",
"a",
"string",
"of",
"VLANs",
"1",
"to",
"4094",
".",
"A",
"single",
"vlan",
"is",
"separated",
"by",
"'",
",",
"'",
",",
"for",
"example",
":",
"2",
",",
"4",
",",
"6",
".",
"Continuous",
"vlan",
"is",
"separated",
"by",
"'",
"-",
"'",
",",
"for",
"example",
":",
"8",
"-",
"2048",
".",
"::=",
"{",
"dpLbdVlanCtrlObjects",
"1",
"}"
],
"syntax_tree": [
[
"row",
"Dlink2kVlanList"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the VLANs in a string of VLANs 1 to 4094. A single vlan is separated by ',', for example: 2,4,6. Continuous vlan is separated by '-', for example: 8-2048."
],
null,
null,
null,
null
]
}Module: DLINKPRIME-LBD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'OBJECT-IDENTITY', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'Q-BRIDGE-MIB': ['VlanId'], 'DLINK-ID-REC-MIB': ['dlinkPrimeCommon']}Related source files and packages:
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Same file in DGS-1100_MP_MPP_C1_2.00.07_MIB.RAR.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.15.7.1.6.2 | dpLbdVlanCrlSecond2K | 0 | 0 |