Status in source: current.
Names: cambiumpmp80211SoftwareUpdateError
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cambiumpmp80211SoftwareUpdateError",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Software Update error code: 0 - Finished successfully, waiting for reboot. 1 - SW update file download failed. 2 - Unpack failed, damaged or wrong format package. 3 - Firmware digital signature check failed. 4 - U-Boot digital signature check failed. 5 - Firmware FLASH write failed. 6 - U-Boot FLASH write failed. 7 - Boot partition switch failed. 8 - Board SKU is not supported for this firmware. 9 - Can't read firmware version, upgrade is impossible. 10 - Down-grade not supported for WiFi & ePTP modes. 11 - Down-grade below 2.3.1 is not supported for AP Lite device. 12 - Down-grade not supported for non SM TDD mode. 13 - Down-grade below 2.4.2 not supported for Force180/200 board types. 14 - Down-grade below 2.5.0 not supported for AP WiFi. 15 - Down-grade below 2.4.3 not supported for Reset Via Power Sequence. 16 - Down-grade below 2.4.3 not supported for Particular Country Locked device. 17 - Down-grade below 2.5.0 not supported for 2.5ms mode. 18 - Down-grade below 2.5.2 not supported for Use MAC Address as EAP-TTLS Username. 19 - Down-grade below 2.6.0 not supported for 5/10Mhz BW for WiFi & ePTP mode. 20 - Separate Management IP Port Forwarding and Data Port Mapping are not supported in SW versions below 2.6.0. 21 - General error. Device has no free memory. 22 - General error code. 23 - Downgrade below release 3.0 is not supported for ePMP2000. 24 - Incorrect firmware type for the current device type. 25 - Firmware file format is wrong for the current device type. 26 - Downgrade below 5.6.6 is not supported for ePMP-Elevate board type. 27 - Downgrade below 3.0.1 is not supported for 2.5G board type. 28 - Downgrade below 3.1 is not supported if Preffered AP Table contains SSIDs with spaces. 29 - Manifest Digital signature check failed. 30 - Downgrade below 3.4 is not supported for Force 190 boards. 31 - Downgrade below 3.5.2 is not supported for 6 GHz board type. 32 - Downgrade below 3.4 is not supported for Elevate 2.4 GHz board. 33 - Versions below 3.5 do not support License Server. Disable the License Server option before downgrade. 34 - Opening binary sw-upgrader failed. 35 - General error of upgrade process. 36 - Channel Bonding is not supported in SW versions below 4.1.1. 37 - 80 MHz channel bandwidth is not supported in SW versions below 4.1.1. 38 - NAT and Router modes are not supported in SW versions below 4.3. 39 - Downgrade below 3.5.4 is not supported for 802.11n devices and below 4.3 for 802.11ac devices with MAC addresses from pool 58:C1:7A:xx:xx:xx. 40 - MTU value other than 1538 is not supported in SW versions below 4.1.3. 41 - Downgrade below 4.3 is not supported for Force 300-16 boards. 42 - Membership VLAN/VLAN Mapping is not supported in SW versions below 4.3. 43 - Downgrade below 4.3 is not supported for ePMP3000 boards. 44 - 40 or 80 MHz channel bandwidth is not supported for ePMP3000 in SW versions below 4.3.1. 45 - Cannot upgrade this device with IPv6 enabled. 46 - Software Upgrade is Rejected because Trial Configuration is in progress. 47 - Downgrade below 4.4 is not supported for Force 300-13 or Force 300-19 boards. 48 - Downgrade below 4.5 is not supported for ePMP MP 3000 board. 49 - ePTP mode is not supported in SW versions below 4.5. 50 - 2.5 ms mode is not supported in SW versions below 4.6. 51 - 5/10Mhz BW mode is not supported in SW versions below 4.5. 52 - Reliable multicast is not supported in SW versions below 4.5. 53 - ACS is not supported in SW versions below 4.5. 54 - Standard WiFi Driver Mode is not supported in SW versions below 4.5. 55 - Omni/Split-Sector Antenna is not supported in SW versions below 4.5. 56 - Downgrade below 4.5.4 is not supported for 802.11n devices with MAC addresses from pool BC:E6:7C:xx:xx:xx. 57 - ACS/DCS is not supported in SW versions below 4.5. 58 - MTU value above 1700 is not supported in SW versions below 4.6. 59 - Downgrade below 4.6 is not supported for MIPS based boards. 60 - 70/30 65/35 60/40 55/45 45/55 40/60 35/65 downlink/uplink ratios are not supported in SW versions below 4.6. 61 - cnVision devices aren't supported in SW versions below 4.6. 62 - Downgrade below 4.6.1 is not supported for Force 300-25 V2 board. 63 - Downgrade below 4.7 is not supported for Force 200L. 64 - Cannot downgrade below 4.6.1 if DL Max Rate is not set to Use AP's config. 65 - DPI is not supported in SW versions below 4.7. 66 - WLR Driver Mode is not supported in SW versions below 5.2.0. 67 - Downgrade below 5.2 is not supported for 6GHz boards. 68 - Intelbras or Mikrotik licenses activated. Versions below 4.7 don't support those. 69 - Downgrade below 4.7 is not supported for boards with soft country lock set. 70 - Downgrade below 5.4 is not supported for this type of devices. 71 - Downgrade below 4.7 is not supported for boards with flexible mode selected. 72 - Downgrade below 4.7 is not supported for boards with Port Forwarding configured containing ports 22(SSH), 161(SNMP), 80(HTTP), 443(HTTPS) 73 - TR-069 option is not supported in SW versions below 5.2 on 802.11ax devices and 4.7 on other devices. 74 - Downgrade below 4.6.4 is not supported for this device hardware. 75 - Downgrade below 4.7.1 is not supported for Force 300-25L V2 board. 77 - Downgrade below 4.7.1 is not supported with IPv6 mode selected other than Static or DHCP 78 - AES-256 Cipher Type is not supported in SW versions below 5.6 79 - TDD Driver Mode is not supported in SW versions below 5.6 80 - AFC Proxy is not supported in SW versions below 5.7.1 81 - Downgrade below 5.8 with enabled MIR is not supported Device Allocation: AP, SM\"",
"::=",
"{",
"cambiumpmp80211SystemActions",
"13",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Software Update error code: 0 - Finished successfully, waiting for reboot. 1 - SW update file download failed. 2 - Unpack failed, damaged or wrong format package. 3 - Firmware digital signature check failed. 4 - U-Boot digital signature check failed. 5 - Firmware FLASH write failed. 6 - U-Boot FLASH write failed. 7 - Boot partition switch failed. 8 - Board SKU is not supported for this firmware. 9 - Can't read firmware version, upgrade is impossible. 10 - Down-grade not supported for WiFi & ePTP modes. 11 - Down-grade below 2.3.1 is not supported for AP Lite device. 12 - Down-grade not supported for non SM TDD mode. 13 - Down-grade below 2.4.2 not supported for Force180/200 board types. 14 - Down-grade below 2.5.0 not supported for AP WiFi. 15 - Down-grade below 2.4.3 not supported for Reset Via Power Sequence. 16 - Down-grade below 2.4.3 not supported for Particular Country Locked device. 17 - Down-grade below 2.5.0 not supported for 2.5ms mode. 18 - Down-grade below 2.5.2 not supported for Use MAC Address as EAP-TTLS Username. 19 - Down-grade below 2.6.0 not supported for 5/10Mhz BW for WiFi & ePTP mode. 20 - Separate Management IP Port Forwarding and Data Port Mapping are not supported in SW versions below 2.6.0. 21 - General error. Device has no free memory. 22 - General error code. 23 - Downgrade below release 3.0 is not supported for ePMP2000. 24 - Incorrect firmware type for the current device type. 25 - Firmware file format is wrong for the current device type. 26 - Downgrade below 5.6.6 is not supported for ePMP-Elevate board type. 27 - Downgrade below 3.0.1 is not supported for 2.5G board type. 28 - Downgrade below 3.1 is not supported if Preffered AP Table contains SSIDs with spaces. 29 - Manifest Digital signature check failed. 30 - Downgrade below 3.4 is not supported for Force 190 boards. 31 - Downgrade below 3.5.2 is not supported for 6 GHz board type. 32 - Downgrade below 3.4 is not supported for Elevate 2.4 GHz board. 33 - Versions below 3.5 do not support License Server. Disable the License Server option before downgrade. 34 - Opening binary sw-upgrader failed. 35 - General error of upgrade process. 36 - Channel Bonding is not supported in SW versions below 4.1.1. 37 - 80 MHz channel bandwidth is not supported in SW versions below 4.1.1. 38 - NAT and Router modes are not supported in SW versions below 4.3. 39 - Downgrade below 3.5.4 is not supported for 802.11n devices and below 4.3 for 802.11ac devices with MAC addresses from pool 58:C1:7A:xx:xx:xx. 40 - MTU value other than 1538 is not supported in SW versions below 4.1.3. 41 - Downgrade below 4.3 is not supported for Force 300-16 boards. 42 - Membership VLAN/VLAN Mapping is not supported in SW versions below 4.3. 43 - Downgrade below 4.3 is not supported for ePMP3000 boards. 44 - 40 or 80 MHz channel bandwidth is not supported for ePMP3000 in SW versions below 4.3.1. 45 - Cannot upgrade this device with IPv6 enabled. 46 - Software Upgrade is Rejected because Trial Configuration is in progress. 47 - Downgrade below 4.4 is not supported for Force 300-13 or Force 300-19 boards. 48 - Downgrade below 4.5 is not supported for ePMP MP 3000 board. 49 - ePTP mode is not supported in SW versions below 4.5. 50 - 2.5 ms mode is not supported in SW versions below 4.6. 51 - 5/10Mhz BW mode is not supported in SW versions below 4.5. 52 - Reliable multicast is not supported in SW versions below 4.5. 53 - ACS is not supported in SW versions below 4.5. 54 - Standard WiFi Driver Mode is not supported in SW versions below 4.5. 55 - Omni/Split-Sector Antenna is not supported in SW versions below 4.5. 56 - Downgrade below 4.5.4 is not supported for 802.11n devices with MAC addresses from pool BC:E6:7C:xx:xx:xx. 57 - ACS/DCS is not supported in SW versions below 4.5. 58 - MTU value above 1700 is not supported in SW versions below 4.6. 59 - Downgrade below 4.6 is not supported for MIPS based boards. 60 - 70/30 65/35 60/40 55/45 45/55 40/60 35/65 downlink/uplink ratios are not supported in SW versions below 4.6. 61 - cnVision devices aren't supported in SW versions below 4.6. 62 - Downgrade below 4.6.1 is not supported for Force 300-25 V2 board. 63 - Downgrade below 4.7 is not supported for Force 200L. 64 - Cannot downgrade below 4.6.1 if DL Max Rate is not set to Use AP's config. 65 - DPI is not supported in SW versions below 4.7. 66 - WLR Driver Mode is not supported in SW versions below 5.2.0. 67 - Downgrade below 5.2 is not supported for 6GHz boards. 68 - Intelbras or Mikrotik licenses activated. Versions below 4.7 don't support those. 69 - Downgrade below 4.7 is not supported for boards with soft country lock set. 70 - Downgrade below 5.4 is not supported for this type of devices. 71 - Downgrade below 4.7 is not supported for boards with flexible mode selected. 72 - Downgrade below 4.7 is not supported for boards with Port Forwarding configured containing ports 22(SSH), 161(SNMP), 80(HTTP), 443(HTTPS) 73 - TR-069 option is not supported in SW versions below 5.2 on 802.11ax devices and 4.7 on other devices. 74 - Downgrade below 4.6.4 is not supported for this device hardware. 75 - Downgrade below 4.7.1 is not supported for Force 300-25L V2 board. 77 - Downgrade below 4.7.1 is not supported with IPv6 mode selected other than Static or DHCP 78 - AES-256 Cipher Type is not supported in SW versions below 5.6 79 - TDD Driver Mode is not supported in SW versions below 5.6 80 - AFC Proxy is not supported in SW versions below 5.7.1 81 - Downgrade below 5.8 with enabled MIR is not supported Device Allocation: AP, SM"
],
null,
null,
null,
null
]
}
- Netdisco MIB archive copies
· Publisher's source file: CAMBIUM-PMP80211-MIB.mib
Vendor MIB copy from the Netdisco archive.
Module: CAMBIUM-PMP80211-MIB
See published definition above
Module imports
{'IPV6-TC': ['Ipv6Address'], 'SNMPv2-TC': ['MacAddress', 'DisplayString'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'enterprises', 'IpAddress', 'Integer32', 'Counter32', 'Counter64', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}
Related source files and packages: