OID reference
1.3.6.1.4.1.17713.8.27.9
For a 1+1 Hot Standby link, the Byte Error Ratio measured by the unit whilst the Protecion State has been active. This ratio is not updated whilst the Protection State is inactive. Calculated since the last reset of the system counters. The reported value is the ratio multiplied by 10 to the power of 12
Identification
{1 3 6 1 4 1 17713 8 27 9}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 64 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.17713.8.27.9.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
activeByteErrorRatio OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For a 1+1 Hot Standby link, the Byte Error Ratio
measured by the unit whilst the Protecion State has been
active. This ratio is not updated whilst the Protection
State is inactive. Calculated since the last reset of the
system counters. The reported value is the ratio
multiplied by 10 to the power of 12"
::= { protectionStats 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
For a 1+1 Hot Standby link, the Byte Error Ratio measured by the unit whilst the Protecion State has been active. This ratio is not updated whilst the Protection State is inactive. Calculated since the last reset of the system counters. The reported value is the ratio multiplied by 10 to the power of 12
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: activeByteErrorRatio
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"activeByteErrorRatio",
"OBJECT-TYPE",
"SYNTAX",
"Counter64",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"For a 1+1 Hot Standby link, the Byte Error Ratio measured by the unit whilst the Protecion State has been active. This ratio is not updated whilst the Protection State is inactive. Calculated since the last reset of the system counters. The reported value is the ratio multiplied by 10 to the power of 12\"",
"::=",
"{",
"protectionStats",
"9",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter64"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"For a 1+1 Hot Standby link, the Byte Error Ratio measured by the unit whilst the Protecion State has been active. This ratio is not updated whilst the Protection State is inactive. Calculated since the last reset of the system counters. The reported value is the ratio multiplied by 10 to the power of 12"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAMBIUM-PTP800-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'IpAddress', 'Counter64', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Related source files and packages:
Vendor MIB copy from the LibreNMS archive.
Module: CAMBIUM-PTP800-MIB
{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'IpAddress', 'Counter64', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
· Download CAMBIUM-PTP800-MIBRelated source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.17713.8.27.1 | activeCodeWordCount | 0 | 0 | |
| 1.3.6.1.4.1.17713.8.27.2 | activeCodeWordErrorCount | 0 | 0 | |
| 1.3.6.1.4.1.17713.8.27.3 | activeByteCount | 0 | 0 | |
| 1.3.6.1.4.1.17713.8.27.4 | activeByteErrorCount | 0 | 0 | |
| 1.3.6.1.4.1.17713.8.27.5 | activeAvailableTime | 0 | 0 | |
| 1.3.6.1.4.1.17713.8.27.6 | activeCounterMeasurementPeriod | 0 | 0 | |
| 1.3.6.1.4.1.17713.8.27.7 | activeWirelessLinkAvailability | 0 | 0 | |
| 1.3.6.1.4.1.17713.8.27.8 | activeCodeWordErrorRatio | 0 | 0 |