Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dataPortCopperAutoNegotiation",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"0",
")",
",",
"enabled",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This controls whether the configuration of the copper data Ethernet interface is automatically negotiated or forced. WARNING: ONLY USE FORCED AS A LAST RESORT. To operate an Ethernet link at a fixed speed, leave auto negotiation enabled and limit the Auto Neg Advertisement to the desired speed. Only force Ethernet configuration as a last resort if constrained auto negotiation fails. NB: Auto-MDI/MDIX is disabled when Forced is set, and the unit defaults to MDIX, so the correct straight through or crossover cable will be required to establish a connection. NB: both ends of an Ethernet link must be configured identically, as Forced and auto negotiation are NOT compatible. A mixed configuration will cause a duplex mismatch\"",
"::=",
"{",
"ethernet",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
0
],
[
"enabled",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This controls whether the configuration of the copper data Ethernet interface is automatically negotiated or forced. WARNING: ONLY USE FORCED AS A LAST RESORT. To operate an Ethernet link at a fixed speed, leave auto negotiation enabled and limit the Auto Neg Advertisement to the desired speed. Only force Ethernet configuration as a last resort if constrained auto negotiation fails. NB: Auto-MDI/MDIX is disabled when Forced is set, and the unit defaults to MDIX, so the correct straight through or crossover cable will be required to establish a connection. NB: both ends of an Ethernet link must be configured identically, as Forced and auto negotiation are NOT compatible. A mixed configuration will cause a duplex mismatch"
],
null,
null,
null,
null
]
}