OID reference

tokStatsARI-FCIErrors

1.3.6.1.4.1.179.2.2.4.1.1.10

Description

The ARI/FCI error counter is incremented when an adapter receives an Active Monitor Present (AMP)MAC frame with the ARI/FCI bits equal to zero and a Standby Monitor Present (SMP)MAC frame with the ARI/FCI bits equal to zero, or more than one SMP MAC frame with the ARI/FCI bits equal to zero, without receiving an inter…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.179.2.2.4.1.1 (tokStatsEntry)
Node code
10
Node name
tokStatsARI-FCIErrors
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.179.2.2.4.1.1.10
URN notation
urn:oid:1.3.6.1.4.1.179.2.2.4.1.1.10
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 179 2 2 4 1 1 10}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) sk(179) skMibs(2) sk-board(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) sk(179) skMibs(2) skSnapSwitchMib(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) sk(179) skMibs(2) sk-board(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) sk(179) skMibs(2) skSnapSwitchMib(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) sk(179) skMibs(2) sk-board(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) sk(179) skMibs(2) skSnapSwitchMib(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) sk(179) skMibs(2) sk-board(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) sk(179) skMibs(2) skSnapSwitchMib(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) sk(179) skMibs(2) sk-board(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) sk(179) skMibs(2) skSnapSwitchMib(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) sk(179) skMibs(2) sk-board(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) sk(179) skMibs(2) skSnapSwitchMib(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) sk(179) skMibs(2) sk-board(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) sk(179) skMibs(2) skSnapSwitchMib(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) sk(179) skMibs(2) sk-board(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) sk(179) skMibs(2) skSnapSwitchMib(2) tok(4) tokStatsTable(1) tokStatsEntry(1) tokStatsARI-FCIErrors(10)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/179/2/2/4/1/1/10
  • /ISO/Identified-Organization/6/1/4/1/179/2/2/4/1/1/10
  • /ISO/3/6/1/4/1/179/2/2/4/1/1/10
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/sk/skMibs/sk-board/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/identified-organization/dod/internet/private/enterprise/sk/skMibs/skSnapSwitchMib/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/identified-organization/dod/internet/private/enterprises/sk/skMibs/sk-board/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/identified-organization/dod/internet/private/enterprises/sk/skMibs/skSnapSwitchMib/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/sk/skMibs/sk-board/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/sk/skMibs/skSnapSwitchMib/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/identified-organization/dod/internet/private/vendor-objects/sk/skMibs/sk-board/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/identified-organization/dod/internet/private/vendor-objects/sk/skMibs/skSnapSwitchMib/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/org/dod/internet/private/enterprise/sk/skMibs/sk-board/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/org/dod/internet/private/enterprise/sk/skMibs/skSnapSwitchMib/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/org/dod/internet/private/enterprises/sk/skMibs/sk-board/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/org/dod/internet/private/enterprises/sk/skMibs/skSnapSwitchMib/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/org/dod/internet/private/ldap-enterprise/sk/skMibs/sk-board/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/org/dod/internet/private/ldap-enterprise/sk/skMibs/skSnapSwitchMib/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/org/dod/internet/private/vendor-objects/sk/skMibs/sk-board/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • /iso/org/dod/internet/private/vendor-objects/sk/skMibs/skSnapSwitchMib/tok/tokStatsTable/tokStatsEntry/tokStatsARI-FCIErrors
  • Additional combinations skipped.

SNMP properties

Value type
Counter
Maximum access defined by MIB
read-only
Status in MIB
mandatory

Interpreting this counter

A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.

Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.

Published counter width: 32 bits. SMIv2: Counter32 · Counter64

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In SK-UPPS-MIB, the row index tokStatsIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.179.2.2.4.1.1.10.<tokStatsIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.179.2.2.4.1.1.10

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

tokStatsARI-FCIErrors OBJECT-TYPE
	SYNTAX  Counter
	ACCESS  read-only
	STATUS  mandatory
	DESCRIPTION
		"The ARI/FCI error counter is incremented when
		an adapter receives an Active Monitor Present
		(AMP)MAC frame with the ARI/FCI bits equal to
		zero and a Standby Monitor Present (SMP)MAC
		frame with the ARI/FCI bits equal to zero, or
		more than one SMP MAC frame with the ARI/FCI
		bits equal to zero, without receiving an
		intervening AMP MAC frame.  This condition
		indicates that the upstream neighbor is unable
		to set the ARI/FCI bits in a frame that it has
		copied."
	::= { tokStatsEntry 10 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The ARI/FCI error counter is incremented when an adapter receives an Active Monitor Present (AMP)MAC frame with the ARI/FCI bits equal to zero and a Standby Monitor Present (SMP)MAC frame with the ARI/FCI bits equal to zero, or more than one SMP MAC frame with the ARI/FCI bits equal to zero, without receiving an intervening AMP MAC frame. This condition indicates that the upstream neighbor is unable to set the ARI/FCI bits in a frame that it has copied.

Sources for this description

SysKonnect UPPS and SnapSwitch MIB copies (IPNetwork Monitor archive)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1SysKonnect UPPS and SnapSwitch MIB copies (IPNetwork Monitor archive)1 record · 1 source

Description 1

tokStatsARI-FCIErrors · mandatorySysKonnect UPPS and SnapSwitch MIB copies (IPNetwork Monitor archive)1 source

Status in source: mandatory.

Names: tokStatsARI-FCIErrors

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "tokStatsARI-FCIErrors",
    "OBJECT-TYPE",
    "SYNTAX",
    "Counter",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"The ARI/FCI error counter is incremented when an adapter receives an Active Monitor Present (AMP)MAC frame with the ARI/FCI bits equal to zero and a Standby Monitor Present (SMP)MAC frame with the ARI/FCI bits equal to zero, or more than one SMP MAC frame with the ARI/FCI bits equal to zero, without receiving an intervening AMP MAC frame. This condition indicates that the upstream neighbor is unable to set the ARI/FCI bits in a frame that it has copied.\"",
    "::=",
    "{",
    "tokStatsEntry",
    "10",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Counter"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "The ARI/FCI error counter is incremented when an adapter receives an Active Monitor Present (AMP)MAC frame with the ARI/FCI bits equal to zero and a Standby Monitor Present (SMP)MAC frame with the ARI/FCI bits equal to zero, or more than one SMP MAC frame with the ARI/FCI bits equal to zero, without receiving an intervening AMP MAC frame. This condition indicates that the upstream neighbor is unable to set the ARI/FCI bits in a frame that it has copied."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.179)

Thomas Ruf

Siblings (16)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.179.2.2.4.1.1.1 tokStatsIndex00
1.3.6.1.4.1.179.2.2.4.1.1.2 tokStatsUpstreamNbr00
1.3.6.1.4.1.179.2.2.4.1.1.3 tokStatsLocalRingNumber00
1.3.6.1.4.1.179.2.2.4.1.1.4 tokStatsRingUpCounts00
1.3.6.1.4.1.179.2.2.4.1.1.5 tokStatsSignalLossErrors00
1.3.6.1.4.1.179.2.2.4.1.1.6 tokStatsLobeWireFaults00
1.3.6.1.4.1.179.2.2.4.1.1.7 tokStatsRingRecoveryCounts00
1.3.6.1.4.1.179.2.2.4.1.1.8 tokStatsLineErrors00
1.3.6.1.4.1.179.2.2.4.1.1.9 tokStatsBurstErrors00
1.3.6.1.4.1.179.2.2.4.1.1.11 tokStatsLostFrameErrors00
1.3.6.1.4.1.179.2.2.4.1.1.12 tokStatsReceiveCongestionErrors00
1.3.6.1.4.1.179.2.2.4.1.1.13 tokStatsFrameCopiedErrors00
1.3.6.1.4.1.179.2.2.4.1.1.14 tokStatsTokenErrors00
1.3.6.1.4.1.179.2.2.4.1.1.15 tokStatsDMABusErrors00
1.3.6.1.4.1.179.2.2.4.1.1.16 tokStatsDMAParityErrors00
1.3.6.1.4.1.179.2.2.4.1.1.17 tokStatsReceiveOverflowErrors00