OID reference
1.3.6.1.4.1.18070.2.2.1.1.12
The system wide default auto-enable timer value. This timer specifies a time delay after a provisioned facility in the auto-enabled state is cleared of all alarms before the state of the facility transitions to enabled. The default value can be overridden by a facility-specific value that is specified when the facilit…
Identification
{1 3 6 1 4 1 18070 2 2 1 1 12}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
neAutoEnabledTimer OBJECT-TYPE
SYNTAX HoursAndMinutes
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The system wide default auto-enable timer value. This timer
specifies a time delay after a provisioned facility in the
auto-enabled state is cleared of all alarms before the state
of the facility transitions to enabled. The default value can
be overridden by a facility-specific value that is specified
when the facility is either provisioned or edited in its
respective table."
::= { networkElement 12 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The system wide default auto-enable timer value. This timer specifies a time delay after a provisioned facility in the auto-enabled state is cleared of all alarms before the state of the facility transitions to enabled. The default value can be overridden by a facility-specific value that is specified when the facility is either provisioned or edited in its respective table.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: neAutoEnabledTimer
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"neAutoEnabledTimer",
"OBJECT-TYPE",
"SYNTAX",
"HoursAndMinutes",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The system wide default auto-enable timer value. This timer specifies a time delay after a provisioned facility in the auto-enabled state is cleared of all alarms before the state of the facility transitions to enabled. The default value can be overridden by a facility-specific value that is specified when the facility is either provisioned or edited in its respective table.\"",
"::=",
"{",
"networkElement",
"12",
"}"
],
"syntax_tree": [
[
"row",
"HoursAndMinutes"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The system wide default auto-enable timer value. This timer specifies a time delay after a provisioned facility in the auto-enabled state is cleared of all alarms before the state of the facility transitions to enabled. The default value can be overridden by a facility-specific value that is specified when the facility is either provisioned or edited in its respective table."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: BTI-7000-MIB
See published definition above
{'BTI-MIB': ['btiModules', 'bti7000'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime', 'DisplayString', 'MacAddress', 'TruthValue', 'RowStatus'], 'BTI-TC-MIB': ['FixedX10', 'FixedX100', 'ShelfType', 'ShelfConfigType', 'SlotType', 'CpType', 'OaType', 'XcvrType', 'AmdType', 'AmdPortType', 'CondReportType', 'CondSeverity', 'CondServiceAffecting', 'FiberType', 'WDMGrid', 'TimeZone', 'AdminStatus', 'OperStatus', 'OperStatQlfr', 'HoursAndMinutes', 'PassivePortType', 'XcvrProtocolType', 'PMIntervalType', 'PMValidity', 'BERType', 'ProtSwEvtType', 'OcnType', 'StsnType', 'StmnType', 'VcnType', 'MediaRateType', 'DuplexModeType', 'XCType', 'ProtectionStatusType', 'Unsigned64', 'PMMontype', 'UpgradeCompleteStage', 'ProtSwOpCmd', 'InitializeCmd', 'OdunType', 'SwitchIdxType', 'PvxL1PortType', 'PvxPortType', 'PowerFeedModeType', 'SyncSwEvtType', 'NotifObjectType', 'NotifCodeType', 'AreaID', 'DesignatedRouterPriority', 'InetAddressType', 'InetAddress', 'EnvNotifCodeType', 'MirrorConfigType', 'LoopbackType', 'LldpChassisIdSubtype', 'LldpChassisId', 'LldpPortIdSubtype', 'LldpPortId'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Gauge32', 'Integer32', 'Unsigned32']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18070.2.2.1.1.1 | neSWVersion | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.2 | neNum | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.3 | neSiteNum | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.4 | neDateAndTime | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.5 | neTimeZone | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.6 | neAutoDST | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.7 | neGateway | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.8 | neSecGateway | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.9 | neActiveGateway | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.10 | neAutoProv | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.11 | neAutoDeProv | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.13 | ntpClient | 10 | 13 | |
| 1.3.6.1.4.1.18070.2.2.1.1.14 | neFPDetect | 0 | 0 | |
| 1.3.6.1.4.1.18070.2.2.1.1.15 | neHTAutoShutdown | 0 | 0 |