Description 1
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer
Sources for this description
Radware MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.1872.2.5.1.2.3.1.1.17
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer
Identification
{1 3 6 1 4 1 1872 2 5 1 2 3 1 1 17}
Definitions may combine these properties differently.
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter widths: 32, 64 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ALTEON-CHEETAH-SWITCH-MIB, the row index portStatsIndx is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.17.<portStatsIndx>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.17
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
portStatsPhyIfInMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer"
::= { portStatsTableEntry 17 }portStatsPhyIfInMcastPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.
."
::= { portStatsTableEntry 17 }portStatsPhyIfInMcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.
."
::= { portStatsTableEntry 17 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer
Radware MIB copies (LibreNMS/Observium Community)
Description 2
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. .
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copiesNortel MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: portStatsPhyIfInMcastPkts
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"portStatsPhyIfInMcastPkts",
"OBJECT-TYPE",
"SYNTAX",
"Counter64",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer\"",
"::=",
"{",
"portStatsTableEntry",
"17",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter64"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Radware support.
Module: ALTEON-CHEETAH-SWITCH-MIB
See published definition above
{'SNMPv2-TC': ['PhysAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'Counter64', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'ipAddrEntry'], 'ALTEON-ROOT-MIB': ['aws-switch']}Related source files and packages:
Status in source: current.
Names: portStatsPhyIfInMcastPkts
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"portStatsPhyIfInMcastPkts",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. .\"",
"::=",
"{",
"portStatsTableEntry",
"17",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. ."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: ALTEON-CHEETAH-SWITCH-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'PhysAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'IpAddress', 'TimeTicks'], 'ALTEON-ROOT-MIB': ['aws-switch']}Status in source: current.
Names: portStatsPhyIfInMcastPkts
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"portStatsPhyIfInMcastPkts",
"OBJECT-TYPE",
"SYNTAX",
"Counter64",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. .\"",
"::=",
"{",
"portStatsTableEntry",
"17",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter64"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. ."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Nortel support.
Module: ALTEON-CHEETAH-SWITCH-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'PhysAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'Counter64', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['ipAddrEntry'], 'ALTEON-ROOT-MIB': ['aws-switch']}Vendor MIB copy from the LibreNMS archive.
Module: ALTEON-CHEETAH-SWITCH-MIB
{'SNMPv2-TC': ['DisplayString', 'PhysAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'Counter64', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['ipAddrEntry'], 'ALTEON-ROOT-MIB': ['aws-switch']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: ALTEON-CHEETAH-SWITCH-MIB
{'SNMPv2-TC': ['DisplayString', 'PhysAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter32', 'Gauge32', 'Counter64', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['ipAddrEntry'], 'ALTEON-ROOT-MIB': ['aws-switch']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.1 | portStatsIndx | 0 | 0 | The port index. |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.2 | portStatsPhyIfInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.3 | portStatsPhyIfInUcastPkts | 0 | 0 | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.4 | portStatsPhyIfInNUcastPkts | 0 | 0 | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.5 | portStatsPhyIfInDiscards | 0 | 0 | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being de… |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.6 | portStatsPhyIfInErrors | 0 | 0 | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.7 | portStatsPhyIfInUnknownProtos | 0 | 0 | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.8 | portStatsPhyIfOutOctets | 0 | 0 | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.9 | portStatsPhyIfOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those… |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.10 | portStatsPhyIfOutNUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast … |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.11 | portStatsPhyIfOutDiscards | 0 | 0 | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being t… |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.12 | portStatsPhyIfOutErrors | 0 | 0 | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.13 | portStatsPhyIfOutQLen | 0 | 0 | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.14 | portStatsPhyIfInBroadcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this s… |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.15 | portStatsPhyIfOutBroadcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address… |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.16 | portStatsClear | 0 | 0 | Setting this value to clear(2) clears the stats for this port. |
| 1.3.6.1.4.1.1872.2.5.1.2.3.1.1.18 | portStatsPhyIfOutMcastPkts | 0 | 0 |