This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
Sources for this description
IBM MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.19046.2.7.24.1.1.1.3
This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
Identification
{1 3 6 1 4 1 19046 2 7 24 1 1 1 3}
| Value | Name |
|---|---|
| 1 | saveNeeded |
| 2 | noSaveNeeded |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.19046.2.7.24.1.1.1.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
agSavePending OBJECT-TYPE
SYNTAX INTEGER {
saveNeeded(1),
noSaveNeeded(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash."
::= { agSystem 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
IBM MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agSavePending
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agSavePending",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"saveNeeded",
"(",
"1",
")",
",",
"noSaveNeeded",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.\"",
"::=",
"{",
"agSystem",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"saveNeeded",
1
],
[
"noSaveNeeded",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. IBM support.
Module: LENOVO-GbTOR-G8272-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'LENOVO-SMI-MIB': ['tor-mibs'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Registration