OID reference
1.3.6.1.4.1.1918.2.13.10.70.10.35
When AVC is enabled the rectifier output voltage is adjusted to maintain the bus voltage at the configured float voltage (plus or minus any adjustments by active control processes) within a predefined dead band. Enable AVC unless there is specific reason to disable.
Identification
{1 3 6 1 4 1 1918 2 13 10 70 10 35}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
enable-Active-Voltage-Control OBJECT-TYPE
SYNTAX Enable-State
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When AVC is enabled the rectifier output voltage is adjusted to maintain the bus voltage at the configured float voltage (plus or minus any adjustments by active control processes) within a predefined dead band. Enable AVC unless there is specific reason to disable."
DEFVAL { enabled }
::= { voltage-Control 35 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
When AVC is enabled the rectifier output voltage is adjusted to maintain the bus voltage at the configured float voltage (plus or minus any adjustments by active control processes) within a predefined dead band. Enable AVC unless there is specific reason to disable.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: enable-Active-Voltage-Control
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"enable-Active-Voltage-Control",
"OBJECT-TYPE",
"SYNTAX",
"Enable-State",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"When AVC is enabled the rectifier output voltage is adjusted to maintain the bus voltage at the configured float voltage (plus or minus any adjustments by active control processes) within a predefined dead band. Enable AVC unless there is specific reason to disable.\"",
"DEFVAL",
"{",
"enabled",
"}",
"::=",
"{",
"voltage-Control",
"35",
"}"
],
"syntax_tree": [
[
"row",
"Enable-State"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"When AVC is enabled the rectifier output voltage is adjusted to maintain the bus voltage at the configured float voltage (plus or minus any adjustments by active control processes) within a predefined dead band. Enable AVC unless there is specific reason to disable."
],
null,
null,
null,
[
"DEFVAL",
"enabled"
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: RPS-SC200-MIB
See published definition above
{'RFC-1213': ['DisplayString'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['enterprises', 'IpAddress', 'TimeTicks', 'OBJECT-TYPE', 'mib-2', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Counter32']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1918.2.13.10.70.10.10 | float-Voltage | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.70.10.15 | maximum-System-Voltage | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.70.10.17 | minimum-System-Voltage | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.70.10.20 | bus-Voltage | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.70.10.30 | target-Voltage | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.70.10.40 | avc-State | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.70.10.50 | avc-Offset | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.13.10.70.10.60 | base-Voltage | 0 | 0 |