OID reference
1.3.6.1.4.1.1918.2.14.10.33.20
If set, S3P requires a password to be used before write access is granted. This password may be used to control remote configuration change or control actions. Note that the password is sent unencrypted. Clear the serial access password by deleting the password and apply the change.
Identification
{1 3 6 1 4 1 1918 2 14 10 33 20}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.1918.2.14.10.33.20.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
s3pWriteAccessPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If set, S3P requires a password to be used before write access is granted. This password may be used to control remote configuration change or control actions. Note that the password is sent unencrypted. Clear the serial access password by deleting the password and apply the change."
DEFVAL { "" }
::= { accessControl 20 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
If set, S3P requires a password to be used before write access is granted. This password may be used to control remote configuration change or control actions. Note that the password is sent unencrypted. Clear the serial access password by deleting the password and apply the change.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: s3pWriteAccessPassword
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"s3pWriteAccessPassword",
"OBJECT-TYPE",
"SYNTAX",
"DisplayString",
"(",
"SIZE",
"(",
"0",
".",
".",
"32",
")",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"If set, S3P requires a password to be used before write access is granted. This password may be used to control remote configuration change or control actions. Note that the password is sent unencrypted. Clear the serial access password by deleting the password and apply the change.\"",
"DEFVAL",
"{",
[
"literal",
"2222"
],
"}",
"::=",
"{",
"accessControl",
"20",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"DisplayString",
[
"octetStringSubType",
[
[
0,
32
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If set, S3P requires a password to be used before write access is granted. This password may be used to control remote configuration change or control actions. Note that the password is sent unencrypted. Clear the serial access password by deleting the password and apply the change."
],
null,
null,
null,
[
"DEFVAL",
"\"\""
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: RpsSc300Mib
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['enterprises', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: RPS-SC300-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString'], 'SNMPv2-SMI': ['enterprises', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1918.2.14.10.33.10 | uiAccess | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.14.10.33.30 | remoteAccessLevel | 0 | 0 | |
| 1.3.6.1.4.1.1918.2.14.10.33.40 | uploadingFirmware | 0 | 0 |