Status in source: current.
Technical details
{
"smi_kind": "NOTIFICATION-TYPE",
"definition": [
"adslAtucDspLineResetTrap",
"NOTIFICATION-TYPE",
"OBJECTS",
"{",
"managedObjectClass",
",",
"managedObjectInstance",
",",
"sequenceNumber",
",",
"perceivedSeverity",
",",
"eventTime",
",",
"eventTypePem",
",",
"probableCause",
"}",
"STATUS",
"current",
"DESCRIPTION",
"\"The indicated line has autonomously reset itself. This should not occur and can be due to CPU overload or some other internal DSP SW failure. If necessary a LinkDown should proceed this fault. The line will be reset and possibly taken into service again. In case too many line resets have been performed a DSP Communication Failure shall be triggered and the DSP reset and reloaded. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Minor 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type ProcessingErrorAlarm 7: Probable cause EquipmentMalfunction \"",
"::=",
"{",
"adslAtucXTrapsEntry",
"10",
"}"
],
"syntax_tree": [
[
"Objects",
[
"managedObjectClass",
"managedObjectInstance",
"sequenceNumber",
"perceivedSeverity",
"eventTime",
"eventTypePem",
"probableCause"
]
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The indicated line has autonomously reset itself. This should not occur and can be due to CPU overload or some other internal DSP SW failure. If necessary a LinkDown should proceed this fault. The line will be reset and possibly taken into service again. In case too many line resets have been performed a DSP Communication Failure shall be triggered and the DSP reset and reloaded. Valid from: EDA 1.1R2A Parameters 1: Managed object class IP DSLAM Port 2: Managed object ID (MAC + PortNo) 3: Sequence number (Alarm sequence number) 4: Perceived severity Minor 5: Event time (Timestamp is retrieved from a SNTP server) 6: Event type ProcessingErrorAlarm 7: Probable cause EquipmentMalfunction"
],
null
]
}