Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dhcpServerMacAddress",
"OBJECT-TYPE",
"SYNTAX",
"MacAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Use this parameter to convert the end-users DHCP messages from broadcast to unicast. This is very usefull when trying to minimise the amount of broadcast in a L2 network. When the IP-DSLAM receives a DHCP Discover or a Request it will change the destination MAC address from the broadcast address to the configured DHCP Server Mac Address (This parameter). - To enable the functionality add the MAC address of the DHCP server (To configure 00-80-03-04-05-06 add 0x00 0x80 0x03 0x04 0x05 0x06) - To disable the functionality add MAC address 00-00-00-00-00-00 Note: When using this function the end-user will no longer be able to select between different DHCP servers. This functionality is only valid if accessMethod is set to 'dhcp' or 'dhcpIpoa'. Valid from: EDA 2.2 R3A \"",
"::=",
"{",
"pvcEntry",
"115",
"}"
],
"syntax_tree": [
[
"row",
"MacAddress"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Use this parameter to convert the end-users DHCP messages from broadcast to unicast. This is very usefull when trying to minimise the amount of broadcast in a L2 network. When the IP-DSLAM receives a DHCP Discover or a Request it will change the destination MAC address from the broadcast address to the configured DHCP Server Mac Address (This parameter). - To enable the functionality add the MAC address of the DHCP server (To configure 00-80-03-04-05-06 add 0x00 0x80 0x03 0x04 0x05 0x06) - To disable the functionality add MAC address 00-00-00-00-00-00 Note: When using this function the end-user will no longer be able to select between different DHCP servers. This functionality is only valid if accessMethod is set to 'dhcp' or 'dhcpIpoa'. Valid from: EDA 2.2 R3A"
],
null,
null,
null,
null
]
}