Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"accessMethod",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"dhcp",
"(",
"0",
")",
",",
"staticIp",
"(",
"1",
")",
",",
"transparrentLan",
"(",
"2",
")",
",",
"pppoe",
"(",
"3",
")",
",",
"pppoa",
"(",
"4",
")",
",",
"pppox",
"(",
"5",
")",
",",
"staticIpoa",
"(",
"6",
")",
",",
"dhcpIpoa",
"(",
"7",
")",
",",
"transparentIpoa",
"(",
"8",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Determines which access method to use for the specific PVC. 0 - DHCP = Use a dynamic IP address (using DHCP). 1 - Static IP = Use a static IP address. 2 - Transparrent LAN = Allow access from all kinds of ethernet packets. All filtering is disabled - VLAN is only security mean. 3 - PPPoE = Use PPPoE as access method. 4 - PPPoA = Use PPPoA as access method. This is converted to PPPoE in the aggregate network. 5 - PPPoX = Autodetect if PPPoE or PPPoA is used on tributary side. 6 - StaticIPoA = Use a static IP address over ATM. This is converted to IP over Ethernet in the aggregate network. 7 - DHCPIPoA = Use a dynamic IP over ATM, which is converted to IP over Ethernet in the aggregate network. 8 - TransparentIPoA = Use a Transparent IP over ATM. This is converted to IP over Ethernet in the aggregate network. \"",
"::=",
"{",
"pvcEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"dhcp",
0
],
[
"staticIp",
1
],
[
"transparrentLan",
2
],
[
"pppoe",
3
],
[
"pppoa",
4
],
[
"pppox",
5
],
[
"staticIpoa",
6
],
[
"dhcpIpoa",
7
],
[
"transparentIpoa",
8
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Determines which access method to use for the specific PVC. 0 - DHCP = Use a dynamic IP address (using DHCP). 1 - Static IP = Use a static IP address. 2 - Transparrent LAN = Allow access from all kinds of ethernet packets. All filtering is disabled - VLAN is only security mean. 3 - PPPoE = Use PPPoE as access method. 4 - PPPoA = Use PPPoA as access method. This is converted to PPPoE in the aggregate network. 5 - PPPoX = Autodetect if PPPoE or PPPoA is used on tributary side. 6 - StaticIPoA = Use a static IP address over ATM. This is converted to IP over Ethernet in the aggregate network. 7 - DHCPIPoA = Use a dynamic IP over ATM, which is converted to IP over Ethernet in the aggregate network. 8 - TransparentIPoA = Use a Transparent IP over ATM. This is converted to IP over Ethernet in the aggregate network."
],
null,
null,
null,
null
]
}