Description 1
(Ethernet 3) The IPv6 prefix bits of either the network or IPv6 address.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.1966.12.1.51.4.1.4
(Ethernet 3) The IPv6 prefix bits of either the network or IPv6 address.
Identification
{1 3 6 1 4 1 1966 12 1 51 4 1 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | manual | 2 |
| 1 | ip6to4 | 2 |
| 2 | teredo | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index variants: ipv6AddressEth3Index; ipv6TunnelIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1966.12.1.51.4.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
ipv6AddressEth3PrefixBits OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"(Ethernet 3) The IPv6 prefix bits of either the network or
IPv6 address."
::= { ipv6AddressEth3Entry 4 }ipv6TunnelMode OBJECT-TYPE
SYNTAX INTEGER {
manual(0),
ip6to4(1),
teredo(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The method or protocol that is used to create the IPv6 tunnel.
o Manual-When specified, the Device Server will manually create the IPv6
tunnel to the specified Remote Host through the specified Interface.
o ip6to4-When specified, the IOLAN will broadcast to the multicast
address 192.88.99.1 through the specified Interface. When the
closest ip6to4 router responds, it will create the IPv6 tunnel,
encapsulating and decapsulating IPv6 traffic sent to and from
the Device Server.
o Teredo-When specified, the Teredo protocol encapsulates the IPv6
packet as an IPv4 UDP message, allowing it to pass through most
network address translator (NAT) boxes and create an IPv6 tunnel
to the specified Remote Host (a Teredo server) through the
specified Interface.
Default is Manual."
::= { ipv6TunnelEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
(Ethernet 3) The IPv6 prefix bits of either the network or IPv6 address.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
The method or protocol that is used to create the IPv6 tunnel. o Manual-When specified, the Device Server will manually create the IPv6 tunnel to the specified Remote Host through the specified Interface. o ip6to4-When specified, the IOLAN will broadcast to the multicast address 192.88.99.1 through the specified Interface. When the closest ip6to4 router responds, it will create the IPv6 tunnel, encapsulating and decapsulating IPv6 traffic sent to and from the Device Server. o Teredo-When specified, the Teredo protocol encapsulates the IPv6 packet as an IPv4 UDP message, allowing it to pass through most network address translator (NAT) boxes and create an IPv6 tunnel to the specified Remote Host (a Teredo server) through the specified Interface. Default is Manual.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ipv6AddressEth3PrefixBits
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ipv6AddressEth3PrefixBits",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"128",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"(Ethernet 3) The IPv6 prefix bits of either the network or IPv6 address.\"",
"::=",
"{",
"ipv6AddressEth3Entry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
128
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"(Ethernet 3) The IPv6 prefix bits of either the network or IPv6 address."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: PERLE-IOLAN-SDS-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'IpAddress', 'Counter32', 'Unsigned32', 'Integer32', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: PERLE-IOLAN-SDS-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'IpAddress', 'Counter32', 'Unsigned32', 'Integer32', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Status in source: current.
Names: ipv6TunnelMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ipv6TunnelMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"manual",
"(",
"0",
")",
",",
"ip6to4",
"(",
"1",
")",
",",
"teredo",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The method or protocol that is used to create the IPv6 tunnel. o Manual-When specified, the Device Server will manually create the IPv6 tunnel to the specified Remote Host through the specified Interface. o ip6to4-When specified, the IOLAN will broadcast to the multicast address 192.88.99.1 through the specified Interface. When the closest ip6to4 router responds, it will create the IPv6 tunnel, encapsulating and decapsulating IPv6 traffic sent to and from the Device Server. o Teredo-When specified, the Teredo protocol encapsulates the IPv6 packet as an IPv4 UDP message, allowing it to pass through most network address translator (NAT) boxes and create an IPv6 tunnel to the specified Remote Host (a Teredo server) through the specified Interface. Default is Manual.\"",
"::=",
"{",
"ipv6TunnelEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"manual",
0
],
[
"ip6to4",
1
],
[
"teredo",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The method or protocol that is used to create the IPv6 tunnel. o Manual-When specified, the Device Server will manually create the IPv6 tunnel to the specified Remote Host through the specified Interface. o ip6to4-When specified, the IOLAN will broadcast to the multicast address 192.88.99.1 through the specified Interface. When the closest ip6to4 router responds, it will create the IPv6 tunnel, encapsulating and decapsulating IPv6 traffic sent to and from the Device Server. o Teredo-When specified, the Teredo protocol encapsulates the IPv6 packet as an IPv4 UDP message, allowing it to pass through most network address translator (NAT) boxes and create an IPv6 tunnel to the specified Remote Host (a Teredo server) through the specified Interface. Default is Manual."
],
null,
null,
null,
null
]
}Module: PERLE-IOLAN-SDS-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'IpAddress', 'Counter32', 'Unsigned32', 'Integer32', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Module: PERLE-IOLAN-SDS-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'IpAddress', 'Counter32', 'Unsigned32', 'Integer32', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1966.12.1.51.4.1.1 | ipv6AddressEth3Index, ipv6TunnelIndex | 0 | 0 | |
| 1.3.6.1.4.1.1966.12.1.51.4.1.2 | ipv6AddressEth3Status, ipv6TunnelStatus | 0 | 0 | |
| 1.3.6.1.4.1.1966.12.1.51.4.1.3 | ipv6AddressEth2Addr, ipv6TunnelName | 0 | 0 | |
| 1.3.6.1.4.1.1966.12.1.51.4.1.5 | ipv6TunnelRemoteHost, ipv6AddressEth3Auto | 0 | 0 | |
| 1.3.6.1.4.1.1966.12.1.51.4.1.6 | ipv6AddressEth3SendAdvertise, ipv6TunnelGateway | 0 | 0 |