OID reference
1.3.6.1.4.1.1991.3.3.1.1.3.1.8
This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktInHC is supported according to the rules spelled out in RFC2863.
Identification
{1 3 6 1 4 1 1991 3 3 1 1 3 1 8}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 64 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row: bfdSessEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.1991.3.3.1.1.3.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
bfdSessPerfPktInHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the total number of BFD messages
received for this BFD session. It MUST be equal to the
least significant 32 bits of bfdSessPerfPktIn
if bfdSessPerfPktInHC is supported according to
the rules spelled out in RFC2863."
::= { bfdSessPerfEntry 8 }bfdSessPerfPktInHC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value represents the total number of BFD messages
received for this BFD session. It MUST be equal to the
least significant 32 bits of bfdSessPerfPktIn
if bfdSessPerfPktInHC is supported according to
the rules spelled out in RFC2863."
::= { bfdSessPerfEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktInHC is supported according to the rules spelled out in RFC2863.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: bfdSessPerfPktInHC
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"bfdSessPerfPktInHC",
"OBJECT-TYPE",
"SYNTAX",
"Counter64",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktInHC is supported according to the rules spelled out in RFC2863.\"",
"::=",
"{",
"bfdSessPerfEntry",
"8",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter64"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if bfdSessPerfPktInHC is supported according to the rules spelled out in RFC2863."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: FOUNDRY-BFD-STD-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber'], 'FOUNDRY-SN-ROOT-MIB': ['bfd']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the Netdisco archive.
Module: FOUNDRY-BFD-STD-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType', 'InetPortNumber'], 'FOUNDRY-SN-ROOT-MIB': ['bfd']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.3.3.1.1.3.1.1 | bfdSessPerfPktIn | 0 | 0 | |
| 1.3.6.1.4.1.1991.3.3.1.1.3.1.2 | bfdSessPerfPktOut | 0 | 0 | |
| 1.3.6.1.4.1.1991.3.3.1.1.3.1.3 | bfdSessPerfUpTime | 0 | 0 | |
| 1.3.6.1.4.1.1991.3.3.1.1.3.1.4 | bfdSessPerfLastSessDownTime | 0 | 0 | |
| 1.3.6.1.4.1.1991.3.3.1.1.3.1.5 | bfdSessPerfLastCommLostDiag | 0 | 0 | |
| 1.3.6.1.4.1.1991.3.3.1.1.3.1.6 | bfdSessPerfSessUpCount | 0 | 0 | |
| 1.3.6.1.4.1.1991.3.3.1.1.3.1.7 | bfdSessPerfDiscTime | 0 | 0 | |
| 1.3.6.1.4.1.1991.3.3.1.1.3.1.9 | bfdSessPerfPktOutHC | 0 | 0 |