Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"componentPowerDetailsDynamicPowerFavorPerformanceOverPower",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disable",
"(",
"0",
")",
",",
"enable",
"(",
"1",
")",
",",
"notApplicable",
"(",
"255",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the system past its nominal CPU frequency when CPU and memory utilization implies it would help and the system allows it. Dynamic Power Performance Over Power can be active on the component only after Dynamic Power Saver is enabled. This feature is not available on all components types. Please refer to the component documentation for details. If a component does not support the dynamic power saver, this object will return notApplicable (255). Under certain rare circumstances, the enabling of the dynamic power favor performance over power may not complete successfully due to interactions with other component functions, such as BIOS. Therefore, it is highly recommended that the user perform a GET of this object after performing a SET, in order to verify the completion of the intended operation.\"",
"::=",
"{",
"componentPowerDetailsEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disable",
0
],
[
"enable",
1
],
[
"notApplicable",
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"When enabled, Dynamic Power Favor Performance Over Power supports a max performance mode that pushes the system past its nominal CPU frequency when CPU and memory utilization implies it would help and the system allows it. Dynamic Power Performance Over Power can be active on the component only after Dynamic Power Saver is enabled. This feature is not available on all components types. Please refer to the component documentation for details. If a component does not support the dynamic power saver, this object will return notApplicable (255). Under certain rare circumstances, the enabling of the dynamic power favor performance over power may not complete successfully due to interactions with other component functions, such as BIOS. Therefore, it is highly recommended that the user perform a GET of this object after performing a SET, in order to verify the completion of the intended operation."
],
null,
null,
null,
null
]
}