OID reference
1.3.6.1.4.1.2.3.51.2.4.9.1.3.6
Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. NOTE: This MIB object is only applicable to systems with a standby MM. When a user selects the 1G Auto speed setting, the duplex setting will be forced to fullDuplex.
Identification
{1 3 6 1 4 1 2 3 51 2 4 9 1 3 6}
| Value | Name |
|---|---|
| 1 | fullDuplex |
| 2 | halfDuplex |
| 3 | autoDuplex |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.2.3.51.2.4.9.1.3.6.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
standbyExtEthernetInterfaceDuplexSetting OBJECT-TYPE
SYNTAX INTEGER {
fullDuplex(1),
halfDuplex(2),
autoDuplex(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the duplex settings for the data transfer rate to be used over
the ethernet interface: Half, Full, or Auto.
NOTE: This MIB object is only applicable to systems with a standby MM.
When a user selects the 1G Auto speed setting, the duplex setting will be forced to
fullDuplex."
::= { standbyExtEthernetInterface 6 }standbyExtEthernetInterfaceDuplexSetting OBJECT-TYPE
SYNTAX INTEGER {
fullDuplex(1),
halfDuplex(2),
autoDuplex(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the duplex settings for the data transfer rate to be used over
the ethernet interface: Half, Full, or Auto.
NOTE: This MIB object is only applicable to systems with a standby MM."
::= { standbyExtEthernetInterface 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. NOTE: This MIB object is only applicable to systems with a standby MM. When a user selects the 1G Auto speed setting, the duplex setting will be forced to fullDuplex.
IBM MIB copies (LibreNMS/Observium Community)
Description 2
Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. NOTE: This MIB object is only applicable to systems with a standby MM.
IBM MIB copies (LibreNMS/Observium Community)IBM MIB copies (MibBrowser.online)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: standbyExtEthernetInterfaceDuplexSetting
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"standbyExtEthernetInterfaceDuplexSetting",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"fullDuplex",
"(",
"1",
")",
",",
"halfDuplex",
"(",
"2",
")",
",",
"autoDuplex",
"(",
"3",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. NOTE: This MIB object is only applicable to systems with a standby MM. When a user selects the 1G Auto speed setting, the duplex setting will be forced to fullDuplex.\"",
"::=",
"{",
"standbyExtEthernetInterface",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"fullDuplex",
1
],
[
"halfDuplex",
2
],
[
"autoDuplex",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. NOTE: This MIB object is only applicable to systems with a standby MM. When a user selects the 1G Auto speed setting, the duplex setting will be forced to fullDuplex."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: BLADE-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Same file in Observium Community.
Status in source: mandatory.
Names: standbyExtEthernetInterfaceDuplexSetting
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"standbyExtEthernetInterfaceDuplexSetting",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"fullDuplex",
"(",
"1",
")",
",",
"halfDuplex",
"(",
"2",
")",
",",
"autoDuplex",
"(",
"3",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. NOTE: This MIB object is only applicable to systems with a standby MM.\"",
"::=",
"{",
"standbyExtEthernetInterface",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"fullDuplex",
1
],
[
"halfDuplex",
2
],
[
"autoDuplex",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Specifies the duplex settings for the data transfer rate to be used over the ethernet interface: Half, Full, or Auto. NOTE: This MIB object is only applicable to systems with a standby MM."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: CME-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Same file in Observium Community.
Vendor MIB copy from the MibBrowser.online archive. IBM (https://w3.ibm.com/standards ) support.
Module: CME-MIB
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'IpAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.1 | standbyExtEthernetInterfaceType | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.3 | standbyExtEthernetInterfaceHostName | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.4 | standbyExtEthernetInterfaceIPAddress | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.5 | standbyExtEthernetInterfaceDataRate | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.7 | standbyExtEthernetInterfaceLAA | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.8 | standbyExtEthernetInterfaceDhcpEnabled | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.9 | standbyExtEthernetInterfaceGatewayIPAddress | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.10 | standbyExtEthernetInterfaceBIA | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.13 | standbyExtEthernetInterfaceMTU | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.14 | standbyExtEthernetInterfaceSubnetMask | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.15 | advancedFailover | 0 | 0 | |
| 1.3.6.1.4.1.2.3.51.2.4.9.1.3.16 | standbyDhcpEthernetInterface | 9 | 9 |