OID reference

snmpv1SystemAgentEnable

1.3.6.1.4.1.2.3.51.2.4.9.3.1.5

Description

Disable or enable the SNMPv1 agent. Note: To alter any of the configuration settings for the SNMPv1 agent, the following procedure should be used: (1) This object should be set to 'disabled' (2) Make the modifications to other settings (3) This object should be set to 'enabled' (4) Restart the remote supervisor adapte…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2.3.51.2.4.9.3.1 (snmpAgentConfig)
Node code
5
Node name
snmpv1SystemAgentEnable
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2.3.51.2.4.9.3.1.5
URN notation
urn:oid:1.3.6.1.4.1.2.3.51.2.4.9.3.1.5
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2 3 51 2 4 9 3 1 5}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) bladeCenterSnmpMIB(2) configureSP(4) networkConfiguration(9) tcpProtocols(3) snmpAgentConfig(1) snmpv1SystemAgentEnable(5)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/2/3/51/2/4/9/3/1/5
  • /ISO/Identified-Organization/6/1/4/1/2/3/51/2/4/9/3/1/5
  • /ISO/3/6/1/4/1/2/3/51/2/4/9/3/1/5
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/enterprise/IBM/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/enterprise/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/enterprises/IBM/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/enterprises/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/IBM/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/vendor-objects/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/vendor-objects/IBM/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/identified-organization/dod/internet/private/vendor-objects/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/org/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/org/dod/internet/private/enterprise/IBM/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/org/dod/internet/private/enterprise/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • /iso/org/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/bladeCenterSnmpMIB/configureSP/networkConfiguration/tcpProtocols/snmpAgentConfig/snmpv1SystemAgentEnable
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory

Enumerated values

ValueName
0disabled
1enabled

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.2.3.51.2.4.9.3.1.5.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

snmpv1SystemAgentEnable · mandatory

snmpv1SystemAgentEnable  OBJECT-TYPE
                      SYNTAX  INTEGER {
                        disabled(0),
                        enabled(1)
                      }
                      ACCESS  read-write
                      STATUS  mandatory
                      DESCRIPTION
                      "Disable or enable the SNMPv1 agent.

                      NOTE: Restart the management module if this MIB object is changed
                      with respect to the value at system bootup time.  For example the
                      SNMPv1 agent was set to disabled at system bootup time and now
                      it is enabled.  Then restarting the remote supervisor adaptor is
                      required.

                      Also note that when attempting to enable this agent,
                      the following are verified:
                      (1) Is there a valid system contact
                      (2) Is there a valid system name
                      (3) Is there at least one valid community name and for that
                      community name is there one valid IP address or hostname
                      (4) Are all defined community names unique

                      If this verification fails an error response will be returned
                      and the SNMPv1 agent will be left disabled."
                      ::= { snmpAgentConfig 5 }

snmpv1SystemAgentEnable · mandatory

snmpv1SystemAgentEnable  OBJECT-TYPE
                      SYNTAX  INTEGER {
                        disabled(0),
                        enabled(1)
                      }
                      ACCESS  read-write
                      STATUS  mandatory
                      DESCRIPTION
                      "Disable or enable the SNMPv1 agent.

                      NOTE: Restart the management module if this MIB object is changed
                      with respect to the value at system bootup time.  For example the
                      SNMPv1 agent was set to disabled at system bootup time and now
                      it is enabled.  Then restarting the remote supervisor is required.

                      Also note that when attempting to enable this agent,
                      the following are verified:
                      (1) Is there a valid system contact
                      (2) Is there a valid system name
                      (3) Is there at least one valid community name and for that
                      community name is there one valid IP address or hostname
                      (4) Are all defined community names unique

                      If this verification fails an error response will be returned
                      and the SNMPv1 agent will be left disabled."
                      ::= { snmpAgentConfig 5 }

Meaning

Descriptions

3 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

Disable or enable the SNMPv1 agent.

Note: To alter any of the configuration settings for the SNMPv1
agent, the following procedure should be used:
(1) This object should be set to 'disabled'
(2) Make the modifications to other settings
(3) This object should be set to 'enabled'
(4) Restart the remote supervisor adapter if this mib is changed
with respect to the value at system bootup time. For example the
SNMPv1 agent was set to disabled at system bootup time and now
it is enabled. Then restarting the remote supervisor adaptor is
required.

Also note that when attempting to enable this agent,
the following are verifed:
(1) Is there a valid system contact
(2) Is there a valid system name
(3) Is there at least one valid community name and for that
community name is there one valid IP address or hostname

If this verification fails an error response will be returned
and the SNMPv1 agent will be left disabled.
Sources for this description

Circitor

Parsed from BLADE-MIB.mib · BLADE-MIB

Source file: Download BLADE-MIB — archive MIB indexed for IBM (https://w3.ibm.com/standards ) · Publisher's file IBM (https://w3.ibm.com/standards ) archived MIB undated archived revision

Vendor MIB copy from the MibBrowser.online archive. IBM (https://w3.ibm.com/standards ) support.

Related source files and packages:

Source file: Download BLADE-MIB.mib

Browse all files from Circitor

Description 2

Disable or enable the SNMPv1 agent. NOTE: Restart the management module if this MIB object is changed with respect to the value at system bootup time. For example the SNMPv1 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor adaptor is required. Also note that when attempting to enable this agent, the following are verified: (1) Is there a valid system contact (2) Is there a valid system name (3) Is there at least one valid community name and for that community name is there one valid IP address or hostname (4) Are all defined community names unique If this verification fails an error response will be returned and the SNMPv1 agent will be left disabled.

Sources for this description

IBM MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 3

Disable or enable the SNMPv1 agent. NOTE: Restart the management module if this MIB object is changed with respect to the value at system bootup time. For example the SNMPv1 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor is required. Also note that when attempting to enable this agent, the following are verified: (1) Is there a valid system contact (2) Is there a valid system name (3) Is there at least one valid community name and for that community name is there one valid IP address or hostname (4) Are all defined community names unique If this verification fails an error response will be returned and the SNMPv1 agent will be left disabled.

Sources for this description

IBM MIB copies (LibreNMS/Observium Community)IBM MIB copies (MibBrowser.online)

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 2IBM MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 2

snmpv1SystemAgentEnable · mandatoryIBM MIB copies (LibreNMS/Observium Community)1 source

Status in source: mandatory.

Names: snmpv1SystemAgentEnable

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "snmpv1SystemAgentEnable",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "disabled",
    "(",
    "0",
    ")",
    ",",
    "enabled",
    "(",
    "1",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"Disable or enable the SNMPv1 agent. NOTE: Restart the management module if this MIB object is changed with respect to the value at system bootup time. For example the SNMPv1 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor adaptor is required. Also note that when attempting to enable this agent, the following are verified: (1) Is there a valid system contact (2) Is there a valid system name (3) Is there at least one valid community name and for that community name is there one valid IP address or hostname (4) Are all defined community names unique If this verification fails an error response will be returned and the SNMPv1 agent will be left disabled.\"",
    "::=",
    "{",
    "snmpAgentConfig",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "disabled",
            0
          ],
          [
            "enabled",
            1
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "Disable or enable the SNMPv1 agent. NOTE: Restart the management module if this MIB object is changed with respect to the value at system bootup time. For example the SNMPv1 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor adaptor is required. Also note that when attempting to enable this agent, the following are verified: (1) Is there a valid system contact (2) Is there a valid system name (3) Is there at least one valid community name and for that community name is there one valid IP address or hostname (4) Are all defined community names unique If this verification fails an error response will be returned and the SNMPv1 agent will be left disabled."
    ],
    null,
    null,
    null,
    null
  ]
}
Records for description 3IBM MIB copies (LibreNMS/Observium Community), IBM MIB copies (MibBrowser.online)1 record · 2 sources

Description 3

snmpv1SystemAgentEnable · mandatoryIBM MIB copies (LibreNMS/Observium Community), IBM MIB copies (MibBrowser.online)2 sources

Status in source: mandatory.

Names: snmpv1SystemAgentEnable

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "snmpv1SystemAgentEnable",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "disabled",
    "(",
    "0",
    ")",
    ",",
    "enabled",
    "(",
    "1",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"Disable or enable the SNMPv1 agent. NOTE: Restart the management module if this MIB object is changed with respect to the value at system bootup time. For example the SNMPv1 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor is required. Also note that when attempting to enable this agent, the following are verified: (1) Is there a valid system contact (2) Is there a valid system name (3) Is there at least one valid community name and for that community name is there one valid IP address or hostname (4) Are all defined community names unique If this verification fails an error response will be returned and the SNMPv1 agent will be left disabled.\"",
    "::=",
    "{",
    "snmpAgentConfig",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "disabled",
            0
          ],
          [
            "enabled",
            1
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "Disable or enable the SNMPv1 agent. NOTE: Restart the management module if this MIB object is changed with respect to the value at system bootup time. For example the SNMPv1 agent was set to disabled at system bootup time and now it is enabled. Then restarting the remote supervisor is required. Also note that when attempting to enable this agent, the following are verified: (1) Is there a valid system contact (2) Is there a valid system name (3) Is there at least one valid community name and for that community name is there one valid IP address or hostname (4) Are all defined community names unique If this verification fails an error response will be returned and the SNMPv1 agent will be left disabled."
    ],
    null,
    null,
    null,
    null
  ]
}

Historical records

Additional source information

Information from OID Repository
Vendor: IBM
Module: BLADE-MIB

[Automatically extracted from oidview.com]
Information from Circitor 
snmpv1SystemAgentEnable  OBJECT-TYPE
                      SYNTAX  INTEGER {
                        disabled(0),
                        enabled(1)
                      }
                      ACCESS  read-write
                      STATUS  mandatory
                      DESCRIPTION
                      "Disable or enable the SNMPv1 agent.

                      Note:  To alter any of the configuration settings for the SNMPv1
                      agent, the following procedure should be used:
                      (1) This object should be set to 'disabled'
                      (2) Make the modifications to other settings
                      (3) This object should be set to 'enabled'
                      (4) Restart the remote supervisor adapter if this mib is changed 
                      with respect to the value at system bootup time.  For example the 
                      SNMPv1 agent was set to disabled at system bootup time and now 
                      it is enabled.  Then restarting the remote supervisor adaptor is 
                      required.  

                      Also note that when attempting to enable this agent,
                      the following are verifed:
                      (1) Is there a valid system contact
                      (2) Is there a valid system name
                      (3) Is there at least one valid community name and for that
                      community name is there one valid IP address or hostname

                      If this verification fails an error response will be returned
                      and the SNMPv1 agent will be left disabled."
                      ::= { snmpAgentConfig 5 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2)

Bob Moore

Siblings (6)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2.3.51.2.4.9.3.1.1 snmpSystemContact00 A NULL terminated 48 byte string that contains the
SNMP agent contact name. Note: Set snmpSystemAgentEnable
to disabled before …
1.3.6.1.4.1.2.3.51.2.4.9.3.1.2 snmpSystemLocation00 A NULL terminated 48 byte string that contains the
SNMP agent location name. Note: Set snmpSystemAgentEnable
to disabled before…
1.3.6.1.4.1.2.3.51.2.4.9.3.1.3 snmpSystemAgentTrapsDisable00 Disable or enable SNMP traps. Note: Set snmpSystemAgentEnable
to disabled before performing a set of this object.
1.3.6.1.4.1.2.3.51.2.4.9.3.1.4 snmpAgentCommunityConfig117
1.3.6.1.4.1.2.3.51.2.4.9.3.1.6 snmpv3SystemAgentEnable00 Disable or enable the SNMPv3 agent.

Note: To alter any of the configuration settings for the SNMPv3
agent, the following proced…
1.3.6.1.4.1.2.3.51.2.4.9.3.1.9 snmpAgentUserProfileConfig110