OID reference

sshClientAuthPubKeyEntryStatus

1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.9

Description

This object manages the creation and deletion of this entry. The steps recommended to install and to activate a new client authorization public key are: 1. Set values for sshClientAuthPubKeyTftpServer, sshClientAuthPubKeyFileName, sshClientAuthPubKeyFileFormat 2. Create a new entry in this table sshClientAuthPubKeyEnt…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1 (sshClientAuthPubKeyEntry)
Node code
9
Node name
sshClientAuthPubKeyEntryStatus
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.9
URN notation
urn:oid:1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.9
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2 3 51 3 3 1 6 1 1 9}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) ibm(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) atmMIBCompliance2(2) ibmAgents(3) netfinitySupportProcessorAgent(51) ibmIntegratedManagementModuleMIB(3) configureSP(3) remoteAccessConfig(1) sshClientAuth(6) sshClientAuthPubKeyTable(1) sshClientAuthPubKeyEntry(1) sshClientAuthPubKeyEntryStatus(9)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/2/3/51/3/3/1/6/1/1/9
  • /ISO/Identified-Organization/6/1/4/1/2/3/51/3/3/1/6/1/1/9
  • /ISO/3/6/1/4/1/2/3/51/3/3/1/6/1/1/9
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/enterprise/IBM/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/enterprise/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/enterprises/IBM/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/enterprises/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/IBM/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/IBM/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/identified-organization/dod/internet/private/vendor-objects/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/org/dod/internet/private/enterprise/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/org/dod/internet/private/enterprise/IBM/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/org/dod/internet/private/enterprise/atmMIBCompliance2/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • /iso/org/dod/internet/private/enterprises/ibm/ibmAgents/netfinitySupportProcessorAgent/ibmIntegratedManagementModuleMIB/configureSP/remoteAccessConfig/sshClientAuth/sshClientAuthPubKeyTable/sshClientAuthPubKeyEntry/sshClientAuthPubKeyEntryStatus
  • Additional combinations skipped.

SNMP properties

Value type
EntryStatus
Maximum access defined by MIB
read-write
Status in MIB
mandatory

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

sshClientAuthPubKeyEntryStatus · mandatory

sshClientAuthPubKeyEntryStatus     OBJECT-TYPE
        SYNTAX      EntryStatus
        ACCESS      read-write
        STATUS      mandatory
        DESCRIPTION
        "This object manages the creation and deletion of this entry.
        The steps recommended to install and to activate a new client
        authorization public key are:
        1. Set values for sshClientAuthPubKeyTftpServer,
           sshClientAuthPubKeyFileName, sshClientAuthPubKeyFileFormat
        2. Create a new entry in this table
           sshClientAuthPubKeyEntryStatus = createRequest
        3. Import a new key sshClientAuthPubKeyAction = import
           This entry will be valid after sshClientAuthPubKeyAction
           is successfully imported.
        4. Set sshClientAuthPubKeyAcceptFrom and
           sshClientAuthPubKeyComment as required.

        valid(1)        - Indicates that the public key pair represented
                          by this entry is available for use by the Secure
                          Shell Server for client authentication.

        createRequest(2) - A new entry will be created in this table
                           for the specified host key pair and the new
                           entry will transition to the underCreation(3)
                           state. The operation is only accepted if the
                           associated RemoteAccessIdsEntry row defining
                           a local user account is configured.

        underCreation(3) - Indicates that this entry exists in the
                           agent but is unavailable for use. After completing the
                           create operation, the agent will set this object to
                           underCreation(3).

        invalid(4)    - Deletes this entry and any client authentication
                        public key that may be associated with it."
        ::= { sshClientAuthPubKeyEntry 9 }

sshClientAuthPubKeyEntryStatus · mandatory

sshClientAuthPubKeyEntryStatus     OBJECT-TYPE
        SYNTAX      EntryStatus
        ACCESS      read-write
        STATUS      mandatory
        DESCRIPTION
        "This object manages the creation and deletion of this entry.
        The steps recommended to install and to activate a new client
        authorization public key are:
        1. Set values for sshClientAuthPubKeyTftpServer,
           sshClientAuthPubKeyFileName, sshClientAuthPubKeyFileFormat
        2. Create a new entry in this table
           sshClientAuthPubKeyEntryStatus = createRequest
        3. Import a new key sshClientAuthPubKeyAction = import
           This entry will be valid after sshClientAuthPubKeyAction
           is successfully imported.
        4. Set sshClientAuthPubKeyAcceptFrom and
           sshClientAuthPubKeyComment as required.

        valid(1)        - Indicates that the public key pair represented
                          by this entry is available for use by the Secure
                          Shell Server for client authentication.

        createRequest(2) - A new entry will be created in this table
                           for the specified host key pair and the new
                           entry will transition to the underCreation(3)
                           state. The operation is only accepted if the
                           associated RemoteAccessIdsEntry row defining
                           a local user account is configured.

        underCreation(3) - Indicates that this entry exists in the
                           agent but is unavailable for use. After completing the
                           create operation, the agent will set this object to
                           underCreation(3).

        invalid(4)    - Deletes this entry and any client authentication
                        public key that may be associated with it."
        ::= { sshClientAuthPubKeyEntry 9 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

This object manages the creation and deletion of this entry. The steps recommended to install and to activate a new client authorization public key are: 1. Set values for sshClientAuthPubKeyTftpServer, sshClientAuthPubKeyFileName, sshClientAuthPubKeyFileFormat 2. Create a new entry in this table sshClientAuthPubKeyEntryStatus = createRequest 3. Import a new key sshClientAuthPubKeyAction = import This entry will be valid after sshClientAuthPubKeyAction is successfully imported. 4. Set sshClientAuthPubKeyAcceptFrom and sshClientAuthPubKeyComment as required. valid(1) - Indicates that the public key pair represented by this entry is available for use by the Secure Shell Server for client authentication. createRequest(2) - A new entry will be created in this table for the specified host key pair and the new entry will transition to the underCreation(3) state. The operation is only accepted if the associated RemoteAccessIdsEntry row defining a local user account is configured. underCreation(3) - Indicates that this entry exists in the agent but is unavailable for use. After completing the create operation, the agent will set this object to underCreation(3). invalid(4) - Deletes this entry and any client authentication public key that may be associated with it.

Sources for this description

IBM MIB copies (LibreNMS/Observium Community)IBM MIB copies (MibBrowser.online)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1IBM MIB copies (LibreNMS/Observium Community), IBM MIB copies (MibBrowser.online)1 record · 3 sources

Description 1

sshClientAuthPubKeyEntryStatus · mandatoryIBM MIB copies (LibreNMS/Observium Community), IBM MIB copies (MibBrowser.online)3 sources

Status in source: mandatory.

Names: sshClientAuthPubKeyEntryStatus

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "sshClientAuthPubKeyEntryStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "EntryStatus",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"This object manages the creation and deletion of this entry. The steps recommended to install and to activate a new client authorization public key are: 1. Set values for sshClientAuthPubKeyTftpServer, sshClientAuthPubKeyFileName, sshClientAuthPubKeyFileFormat 2. Create a new entry in this table sshClientAuthPubKeyEntryStatus = createRequest 3. Import a new key sshClientAuthPubKeyAction = import This entry will be valid after sshClientAuthPubKeyAction is successfully imported. 4. Set sshClientAuthPubKeyAcceptFrom and sshClientAuthPubKeyComment as required. valid(1) - Indicates that the public key pair represented by this entry is available for use by the Secure Shell Server for client authentication. createRequest(2) - A new entry will be created in this table for the specified host key pair and the new entry will transition to the underCreation(3) state. The operation is only accepted if the associated RemoteAccessIdsEntry row defining a local user account is configured. underCreation(3) - Indicates that this entry exists in the agent but is unavailable for use. After completing the create operation, the agent will set this object to underCreation(3). invalid(4) - Deletes this entry and any client authentication public key that may be associated with it.\"",
    "::=",
    "{",
    "sshClientAuthPubKeyEntry",
    "9",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "EntryStatus"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "This object manages the creation and deletion of this entry. The steps recommended to install and to activate a new client authorization public key are: 1. Set values for sshClientAuthPubKeyTftpServer, sshClientAuthPubKeyFileName, sshClientAuthPubKeyFileFormat 2. Create a new entry in this table sshClientAuthPubKeyEntryStatus = createRequest 3. Import a new key sshClientAuthPubKeyAction = import This entry will be valid after sshClientAuthPubKeyAction is successfully imported. 4. Set sshClientAuthPubKeyAcceptFrom and sshClientAuthPubKeyComment as required. valid(1) - Indicates that the public key pair represented by this entry is available for use by the Secure Shell Server for client authentication. createRequest(2) - A new entry will be created in this table for the specified host key pair and the new entry will transition to the underCreation(3) state. The operation is only accepted if the associated RemoteAccessIdsEntry row defining a local user account is configured. underCreation(3) - Indicates that this entry exists in the agent but is unavailable for use. After completing the create operation, the agent will set this object to underCreation(3). invalid(4) - Deletes this entry and any client authentication public key that may be associated with it."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2)

Bob Moore

Siblings (8)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.1 sshClientAuthRemoteAccessIdIndex00
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.2 sshClientAuthPubKeyIndex00
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.3 sshClientAuthPubKeyType00
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.4 sshClientAuthPubKeySize00
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.5 sshClientAuthPubKeyFingerprint00
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.6 sshClientAuthPubKeyAcceptFrom00
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.7 sshClientAuthPubKeyComment00
1.3.6.1.4.1.2.3.51.3.3.1.6.1.1.8 sshClientAuthPubKeyAction00