{1 3 6 1 4 1 2 6 182 1 0 232}
Trap for drive TapeAlert 032. Flag: Interface. Type: W Cause: The drive has identified an interfacing fault. Required host message: The tape drive has detected a problem with the Fibre Channel Interface. Contact your IBM Service Representative.
Trap for drive TapeAlert 032. Flag: Interface. Type: W Cause: The drive has identified an interfacing fault. Required host message: The tape drive has detected a problem with the SCSI, Fibre or RS-422 interface. See Error Code 8 or 9 located in the list of drive error codes in the 3584 Maintenance Information.
Status in source: current.
Names: ibm3584Trap232
{
"smi_kind": "NOTIFICATION-TYPE",
"definition": [
"ibm3584Trap232",
"NOTIFICATION-TYPE",
"OBJECTS",
"{",
"ibm3584MIBObjectsMTMNLSN",
",",
"ibm3584MIBObjectsErrorCode",
",",
"ibm3584MIBObjectsURC",
",",
"ibm3584MIBObjectsTD",
",",
"ibm3584MIBObjectsWWNN",
",",
"ibm3584MIBObjectsDrvSN",
",",
"ibm3584MIBObjectsSeverity",
",",
"ibm3584MIBObjectsLocation",
"}",
"STATUS",
"current",
"DESCRIPTION",
"\"Trap for drive TapeAlert 032. Flag: Interface. Type: W Cause: The drive has identified an interfacing fault. Required host message: The tape drive has detected a problem with the Fibre Channel Interface. Contact your IBM Service Representative.\"",
"::=",
"{",
"ibm3584MIBTraps",
"232",
"}"
],
"syntax_tree": [
[
"Objects",
[
"ibm3584MIBObjectsMTMNLSN",
"ibm3584MIBObjectsErrorCode",
"ibm3584MIBObjectsURC",
"ibm3584MIBObjectsTD",
"ibm3584MIBObjectsWWNN",
"ibm3584MIBObjectsDrvSN",
"ibm3584MIBObjectsSeverity",
"ibm3584MIBObjectsLocation"
]
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Trap for drive TapeAlert 032. Flag: Interface. Type: W Cause: The drive has identified an interfacing fault. Required host message: The tape drive has detected a problem with the Fibre Channel Interface. Contact your IBM Service Representative."
],
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: IBM-TS4500-MIBv2
ibm3584Trap232 NOTIFICATION-TYPE
OBJECTS { ibm3584MIBObjectsMTMNLSN, ibm3584MIBObjectsErrorCode, ibm3584MIBObjectsURC,
ibm3584MIBObjectsTD, ibm3584MIBObjectsWWNN, ibm3584MIBObjectsDrvSN, ibm3584MIBObjectsSeverity, ibm3584MIBObjectsLocation
}
STATUS current
DESCRIPTION
"Trap for drive TapeAlert 032.
Flag: Interface.
Type: W
Cause: The drive has identified an interfacing fault.
Required host message:
The tape drive has detected a problem with the Fibre Channel Interface.
Contact your IBM Service Representative."
--#SEVERITY WARNING
--#SOURCE_ID "T"
--#CATEGORY "Error Events"
::= { ibm3584MIBTraps 232 }{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Same file in Observium Community.
Downloaded: 2026-10-24T02:12:38.663571+00:00.
Status in source: current.
Names: ibm3584Trap232
{
"smi_kind": "NOTIFICATION-TYPE",
"definition": [
"ibm3584Trap232",
"NOTIFICATION-TYPE",
"OBJECTS",
"{",
"ibm3584MIBObjectsMTMNLSN",
",",
"ibm3584MIBObjectsSKASCASCQ",
",",
"ibm3584MIBObjectsTA",
",",
"ibm3584MIBObjectsURC",
",",
"ibm3584MIBObjectsFSC",
",",
"ibm3584MIBObjectsSCD",
",",
"ibm3584MIBObjectsVOLSER",
",",
"ibm3584MIBObjectsFFFD",
",",
"ibm3584MIBObjectsTD",
",",
"ibm3584MIBObjectsWWNN",
",",
"ibm3584MIBObjectsDrvSN",
",",
"ibm3584MIBObjectsSeverity",
"}",
"STATUS",
"current",
"DESCRIPTION",
"\"Trap for drive TapeAlert 032. Flag: Interface. Type: W Cause: The drive has identified an interfacing fault. Required host message: The tape drive has detected a problem with the SCSI, Fibre or RS-422 interface. See Error Code 8 or 9 located in the list of drive error codes in the 3584 Maintenance Information.\"",
"::=",
"{",
"ibm3584MIBTraps",
"232",
"}"
],
"syntax_tree": [
[
"Objects",
[
"ibm3584MIBObjectsMTMNLSN",
"ibm3584MIBObjectsSKASCASCQ",
"ibm3584MIBObjectsTA",
"ibm3584MIBObjectsURC",
"ibm3584MIBObjectsFSC",
"ibm3584MIBObjectsSCD",
"ibm3584MIBObjectsVOLSER",
"ibm3584MIBObjectsFFFD",
"ibm3584MIBObjectsTD",
"ibm3584MIBObjectsWWNN",
"ibm3584MIBObjectsDrvSN",
"ibm3584MIBObjectsSeverity"
]
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Trap for drive TapeAlert 032. Flag: Interface. Type: W Cause: The drive has identified an interfacing fault. Required host message: The tape drive has detected a problem with the SCSI, Fibre or RS-422 interface. See Error Code 8 or 9 located in the list of drive error codes in the 3584 Maintenance Information."
],
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: IBM-TS3500-MIBv2
ibm3584Trap232 NOTIFICATION-TYPE
OBJECTS { ibm3584MIBObjectsMTMNLSN, ibm3584MIBObjectsSKASCASCQ,
ibm3584MIBObjectsTA, ibm3584MIBObjectsURC, ibm3584MIBObjectsFSC,
ibm3584MIBObjectsSCD, ibm3584MIBObjectsVOLSER, ibm3584MIBObjectsFFFD,
ibm3584MIBObjectsTD, ibm3584MIBObjectsWWNN,
ibm3584MIBObjectsDrvSN, ibm3584MIBObjectsSeverity
}
STATUS current
DESCRIPTION
"Trap for drive TapeAlert 032.
Flag: Interface.
Type: W
Cause: The drive has identified an interfacing fault.
Required host message:
The tape drive has detected a problem with the SCSI,
Fibre or RS-422 interface. See Error Code 8 or 9
located in the list of drive error codes in the 3584
Maintenance Information."
--#SEVERITY WARNING
--#SOURCE_ID "T"
--#CATEGORY "Error Events"
::= { ibm3584MIBTraps 232 }{'SNMPv2-TC': ['DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Same file in Observium Community.
Downloaded: 2026-10-24T02:12:38.659571+00:00.