OID reference

interfaceAdminState

1.3.6.1.4.1.2.6.33.1.3.4.1.5

Description

The administrative state for this port. When set to disabled, no ATM traffic can pass on this port; all connections (SVC and PVC) are cleared. When set to wrap-reply, this interface is wrapped so that all the traffic received from the attached line is sent back on this line. If the interface state is not changed, it w…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2.6.33.1.3.4.1 (interfaceEntry)
Node code
5
Node name
interfaceAdminState
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2.6.33.1.3.4.1.5
URN notation
urn:oid:1.3.6.1.4.1.2.6.33.1.3.4.1.5
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2 6 33 1 3 4 1 5}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmProd(6) atmSw(33) node(1) change(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) ibmProd(6) atmSw(33) node(1) physical(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) prod(6) atmSw(33) node(1) change(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) ibm(2) prod(6) atmSw(33) node(1) physical(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) atmMIBCompliance2(2) ibmProd(6) atmSw(33) node(1) change(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) atmMIBCompliance2(2) ibmProd(6) atmSw(33) node(1) physical(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) atmMIBCompliance2(2) prod(6) atmSw(33) node(1) change(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) atmMIBCompliance2(2) prod(6) atmSw(33) node(1) physical(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmProd(6) atmSw(33) node(1) change(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) ibmProd(6) atmSw(33) node(1) physical(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) prod(6) atmSw(33) node(1) change(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) ibm(2) prod(6) atmSw(33) node(1) physical(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) atmMIBCompliance2(2) ibmProd(6) atmSw(33) node(1) change(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) atmMIBCompliance2(2) ibmProd(6) atmSw(33) node(1) physical(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) atmMIBCompliance2(2) prod(6) atmSw(33) node(1) change(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) atmMIBCompliance2(2) prod(6) atmSw(33) node(1) physical(3) interfaceTable(4) interfaceEntry(1) interfaceAdminState(5)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/2/6/33/1/3/4/1/5
  • /ISO/Identified-Organization/6/1/4/1/2/6/33/1/3/4/1/5
  • /ISO/3/6/1/4/1/2/6/33/1/3/4/1/5
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/ibm/ibmProd/atmSw/node/change/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/ibm/ibmProd/atmSw/node/physical/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/ibm/prod/atmSw/node/change/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/ibm/prod/atmSw/node/physical/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/IBM/ibmProd/atmSw/node/change/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/IBM/ibmProd/atmSw/node/physical/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/IBM/prod/atmSw/node/change/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/IBM/prod/atmSw/node/physical/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/atmMIBCompliance2/ibmProd/atmSw/node/change/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/atmMIBCompliance2/ibmProd/atmSw/node/physical/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/atmMIBCompliance2/prod/atmSw/node/change/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/atmMIBCompliance2/prod/atmSw/node/physical/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprises/ibm/ibmProd/atmSw/node/change/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprises/ibm/ibmProd/atmSw/node/physical/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprises/ibm/prod/atmSw/node/change/interfaceTable/interfaceEntry/interfaceAdminState
  • /iso/identified-organization/dod/internet/private/enterprises/ibm/prod/atmSw/node/physical/interfaceTable/interfaceEntry/interfaceAdminState
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — IBM MIB copies (MibBrowser.online)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory

Variant 2 — MIBdepot

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
mandatory

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

ValueNameSource variants
1enabled1, 2
2disabled1, 2
3wrap-reply1, 2
4wrap-far-end2
5reset-to-default2

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In ATM-SWITCHING-NODE-MIB, the row index interfaceIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.2.6.33.1.3.4.1.5.<interfaceIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2.6.33.1.3.4.1.5

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

interfaceAdminState OBJECT-TYPE
        SYNTAX  INTEGER {
                        enabled (1),
                        disabled (2),
                        wrap-reply (3)
                        }
         ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The administrative state for this port.
                 When set to disabled, no ATM traffic can pass on this
                 port; all connections (SVC and PVC) are cleared.
                 When set to wrap-reply, this interface is wrapped so that
                 all the traffic received from the attached line is sent
                 back on this line. If the interface state is not changed,
                 it will automatically go back to the disabled state after
                 one minute."
        ::= { interfaceEntry 5 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

The administrative state for this port.
When set to disabled, no ATM traffic can pass on this
port; all connections (SVC and PVC) are cleared.
When set to wrap-reply, this interface is wrapped so that
all the traffic received from the attached line is sent
back on this line. If the interface state is not changed,
it will automatically go back to the disabled state after
one minute.
When interfaceAdminState is equal to wrap-far-end,
then the interface located on the other side of the
link is now wrapped.
wrap-reply can only be set for 155 and wan ports.
wrap-far-end cannot be set.
When reset-to-default is set, the port is disabled
and its attributes are reset to the default values.
reset-to-default cannot be read.
reset-to-default applies only for 8260 agents v3.0
or 8285 agents v2.0 and higher.
Sources for this description

MIBdepot

Parsed from atmmib21.mib.txt · ibm · ATM-SWITCHING-NODE-MIB

Source file: Download atmmib21.mib.txt

Source file: Download 65mibv412.mib.txt

Browse all files from MIBdepot

Description 2

The administrative state for this port. When set to disabled, no ATM traffic can pass on this port; all connections (SVC and PVC) are cleared. When set to wrap-reply, this interface is wrapped so that all the traffic received from the attached line is sent back on this line. If the interface state is not changed, it will automatically go back to the disabled state after one minute.

Sources for this description

IBM MIB copies (MibBrowser.online)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 2IBM MIB copies (MibBrowser.online)1 record · 1 source

Description 2

interfaceAdminState · mandatoryIBM MIB copies (MibBrowser.online)1 source

Status in source: mandatory.

Names: interfaceAdminState

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "interfaceAdminState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "enabled",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    ",",
    "wrap-reply",
    "(",
    "3",
    ")",
    "}",
    "ACCESS",
    "read-write",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"The administrative state for this port. When set to disabled, no ATM traffic can pass on this port; all connections (SVC and PVC) are cleared. When set to wrap-reply, this interface is wrapped so that all the traffic received from the attached line is sent back on this line. If the interface state is not changed, it will automatically go back to the disabled state after one minute.\"",
    "::=",
    "{",
    "interfaceEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "enabled",
            1
          ],
          [
            "disabled",
            2
          ],
          [
            "wrap-reply",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "The administrative state for this port. When set to disabled, no ATM traffic can pass on this port; all connections (SVC and PVC) are cleared. When set to wrap-reply, this interface is wrapped so that all the traffic received from the attached line is sent back on this line. If the interface state is not changed, it will automatically go back to the disabled state after one minute."
    ],
    null,
    null,
    null,
    null
  ]
}

Historical records

Additional source information

Information from OID Repository
Vendor: IBM
Module: ATM-SWITCHING-NODE-MIB

[Automatically extracted from oidview.com]
Information from MIBdepot 
interfaceAdminState OBJECT-TYPE
        SYNTAX  INTEGER {
                        enabled (1),
                        disabled (2),
                        wrap-reply (3),
                        wrap-far-end (4),
                        reset-to-default (5)
                        }
         ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The administrative state for this port.
                 When set to disabled, no ATM traffic can pass on this
                 port; all connections (SVC and PVC) are cleared.
                 When set to wrap-reply, this interface is wrapped so that
                 all the traffic received from the attached line is sent
                 back on this line. If the interface state is not changed,
                 it will automatically go back to the disabled state after
                 one minute.
                 When interfaceAdminState is equal to wrap-far-end,
                 then the interface located on the other side of the
                 link is now wrapped.
                 wrap-reply can only be set for 155 and wan ports.
                 wrap-far-end cannot be set.
                 When reset-to-default is set, the port is disabled
                 and its attributes are reset to the default values.
                 reset-to-default cannot be read.
                 reset-to-default applies only for 8260 agents v3.0
                 or 8285 agents v2.0 and higher."
        ::= { interfaceEntry 5 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2)

Bob Moore

Siblings (18)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2.6.33.1.3.4.1.1 interfaceIndex00 The interface number of the port represented by this entry.
This is the same number as the index used to represent this
interface…
1.3.6.1.4.1.2.6.33.1.3.4.1.2 interfaceSlot00 The slot number of this ATM port's module.
1.3.6.1.4.1.2.6.33.1.3.4.1.3 interfacePort00 The port number of this ATM port.
1.3.6.1.4.1.2.6.33.1.3.4.1.4 interfaceConnector00 Whether this port is an internal port (on the backplane)
or an external connector.
1.3.6.1.4.1.2.6.33.1.3.4.1.6 interfaceOperState00 The operational state for this port:
- unknown: the status of this port is unknown (this can
be the result of a module in error)
-…
1.3.6.1.4.1.2.6.33.1.3.4.1.7 interfaceAtmAccess00 The type of ATM access offered on this port:
- privateUni: User Network Interface
- privateNetwork: Switch-to-Switch interface
Thi…
1.3.6.1.4.1.2.6.33.1.3.4.1.8 interfaceMediaType00 The type of media supported on this port.
1.3.6.1.4.1.2.6.33.1.3.4.1.9 interfaceMediaSpeed00 The speed of this interface, in bits per second.
1.3.6.1.4.1.2.6.33.1.3.4.1.10 interfaceMediaErrors00 The number of physical layer errors detected on this media
such as violation errors and length errors.
1.3.6.1.4.1.2.6.33.1.3.4.1.11 interfaceSubSlot00 When equal to 0, this interface (and its physical connector)
is directly located on the module identified by the slot
number.
When…
1.3.6.1.4.1.2.6.33.1.3.4.1.12 interfaceClocking00 The source of the bit clock used for data transmission.
When set to external, the source is the clock received
from the line.
The …
1.3.6.1.4.1.2.6.33.1.3.4.1.13 interfaceScrambling00 Whether data scrambling is used when transmitting on this
line. Scrambling may be applied at the cell level,
at the frame level o…
1.3.6.1.4.1.2.6.33.1.3.4.1.14 interfaceAvailableBandwidth00 The current bandwidth available $$$$
for the reserved bandwidth connections on this port.
In the 8260 agents …
1.3.6.1.4.1.2.6.33.1.3.4.1.15 interfaceAllocatedBandwidth00 The bandwidth, in bits per second, currently used by $$$$
the reserved bandwidth connections on this port.
In the 8260 agents be…
1.3.6.1.4.1.2.6.33.1.3.4.1.16 interfaceMaxBandwidth00 For a privateNetwork port: the maximum bandwidth usable
on this port.
The interfaceMaxBandwidth must not exceed the
physical bandw…
1.3.6.1.4.1.2.6.33.1.3.4.1.17 interfaceFrameFormat00 The format of the frames exchanged on this port.
For a 155 Mbits LAN port, 2 formats are supported:
sonet-sts-3c and sdh-stm-1. I…
1.3.6.1.4.1.2.6.33.1.3.4.1.18 interfaceAdminAtmAccess00 The type of ATM access offered on this port:
- privateUni: User Network Interface
- privateNetwork: Switch-to-Switch interface
Thi…
1.3.6.1.4.1.2.6.33.1.3.4.1.19 interfaceOperAtmAccess00 The type of ATM access offered on this port:
- privateUni: User Network Interface
- privateNetwork: Switch-to-Switch interface
Thi…