Description 1
The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.
OID reference
1.3.6.1.4.1.2011.10.2.18.2.7.1.4
The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.
Identification
{1 3 6 1 4 1 2011 10 2 18 2 7 1 4}
| Value | Name |
|---|---|
| 1 | red |
| 2 | yellow |
| 3 | green |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In H3C-NAT-MIB, the row index consists of these components in order:
h3cNATBLIpAdress (IpAddress): four numeric subidentifiers, one per IPv4 address octet.h3cNATBLSlotNo (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.2011.10.2.18.2.7.1.4.<h3cNATBLIpAdress: four octets>.<h3cNATBLSlotNo>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2011.10.2.18.2.7.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
h3cNATBLConSpd OBJECT-TYPE
SYNTAX INTEGER
{
red(1),
yellow(2),
green(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of connection rate:
red(1) : the connection rate is above the upper limit.
yellow(2): the connection rate is between the upper and lower limit.
green(3) : the conneciton rate is below the lower limit."
::= { h3cNATBLManagerEntry 4 }h3cNATBLConSpd OBJECT-TYPE
SYNTAX INTEGER
{
red(1),
yellow(2),
green(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of connection rate:
red(1) : the connection rate is above the upper limit.
yellow(2): the connection rate is between the upper and lower limit.
green(3) : the connection rate is below the lower limit."
::= { h3cNATBLManagerEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.
Description 2
The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the connection rate is below the lower limit.
H3C and HH3C MIB copies (Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: h3cNATBLConSpd
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"h3cNATBLConSpd",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"red",
"(",
"1",
")",
",",
"yellow",
"(",
"2",
")",
",",
"green",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit.\"",
"::=",
"{",
"h3cNATBLManagerEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"red",
1
],
[
"yellow",
2
],
[
"green",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the conneciton rate is below the lower limit."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: H3C-NAT-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['TimeTicks', 'IpAddress', 'Integer32', 'Counter32', 'OBJECT-TYPE', 'MODULE-IDENTITY'], 'RFC1213-MIB': ['ifIndex'], 'HUAWEI-3COM-OID-MIB': ['h3cCommon']}Related source files and packages:
Status in source: current.
Names: h3cNATBLConSpd
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"h3cNATBLConSpd",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"red",
"(",
"1",
")",
",",
"yellow",
"(",
"2",
")",
",",
"green",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the connection rate is below the lower limit.\"",
"::=",
"{",
"h3cNATBLManagerEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"red",
1
],
[
"yellow",
2
],
[
"green",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The state of connection rate: red(1) : the connection rate is above the upper limit. yellow(2): the connection rate is between the upper and lower limit. green(3) : the connection rate is below the lower limit."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. H3C and HH3C support.
Module: H3C-NAT-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString'], 'SNMPv2-SMI': ['TimeTicks', 'IpAddress', 'Integer32', 'Counter32', 'Counter64', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY'], 'HUAWEI-3COM-OID-MIB': ['h3cCommon']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.10.2.18.2.7.1.1 | h3cNATBLIpAdress | 0 | 0 | |
| 1.3.6.1.4.1.2011.10.2.18.2.7.1.2 | h3cNATBLSlotNo | 0 | 0 | |
| 1.3.6.1.4.1.2011.10.2.18.2.7.1.3 | h3cNATBLConSum | 0 | 0 |