The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.
Sources for this description
H3C and HH3C MIB copies (Observium Community)
OID reference
1.3.6.1.4.1.2011.2.23.1.18.4.3.1.18
The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.
Identification
{1 3 6 1 4 1 2011 2 23 1 18 4 3 1 18}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 64 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HUAWEI-LSW-DEV-ADM-MIB, the row index consists of these components in order:
hwLswFrameIndex (Integer32): one numeric subidentifier for the non-negative value.hwLswSlotIndex (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.18.<hwLswFrameIndex>.<hwLswSlotIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2011.2.23.1.18.4.3.1.18
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
hwLswSlotPktBufMiss OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that the switch was unable to obtain a packet
buffer. Failure to obtain a buffer indicates that buffers were busy."
::= {hwLswSlotEntry 18}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.
H3C and HH3C MIB copies (Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: hwLswSlotPktBufMiss
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwLswSlotPktBufMiss",
"OBJECT-TYPE",
"SYNTAX",
"Counter64",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.\"",
"::=",
"{",
"hwLswSlotEntry",
"18",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter64"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. H3C and HH3C support.
Module: HUAWEI-LSW-DEV-ADM-MIB
See published definition above
{'HCNUM-TC': ['CounterBasedGauge64'], 'SNMPv2-TC': ['DisplayString', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Integer32', 'Counter64'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'HUAWEI-3COM-OID-MIB': ['lswCommon']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.1 | hwLswSlotIndex | 0 | 0 | Slot index. When the slot is empty, listed as vacant slot. |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.2 | hwLswSlotType | 0 | 0 | Slot type. BOM number is recommended. |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.3 | hwLswSlotDesc | 0 | 0 | Slot description |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.4 | hwLswSlotCpuRatio | 0 | 0 | CPU ratio occupied by the slot at the accuracy of 1%, ranging from 1 to 100. O indicates no CPU occupied. |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.5 | hwLswSlotPcbVersion | 0 | 0 | Hardware version of the card |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.6 | hwLswSlotSoftwareVersion | 0 | 0 | Software version of the card |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.7 | hwLswSubslotNumber | 0 | 0 | Sub slot on the card |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.8 | hwLswSlotAdminStatus | 0 | 0 | Slot status |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.9 | hwLswSlotOperStatus | 0 | 0 | Slot operation status |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.10 | hwLswSlotPhyMemory | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.11 | hwLswSlotMemory | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.12 | hwLswSlotMemoryUsed | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.13 | hwLswSlotMemoryRatio | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.14 | hwLswSlotTemperature | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.15 | hwLswSlotPktBufFree | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.16 | hwLswSlotPktBufInit | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.17 | hwLswSlotPktBufMin | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.19 | hwLswSlotRunTime | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.20 | hwLswSlotPhyMemRev | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.21 | hwLswSlotMemRev | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.22 | hwLswSlotMemUsedRev | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.23 | hwLswSlotModelDesc | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.24 | hwLswSlotPktBufThreshold | 0 | 0 | |
| 1.3.6.1.4.1.2011.2.23.1.18.4.3.1.25 | hwLswSlotSerialNumber | 0 | 0 |