OID reference

hwCBQoSMatchRuleIntValue1

1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.5

Description

This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 10999. When the type is ip-prec(5), the value of this object ranges from 2^0 to 2^7, respectively representin…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1 (hwCBQoSMatchRuleCfgInfoEntry)
Node code
5
Node name
hwCBQoSMatchRuleIntValue1
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.5
URN notation
urn:oid:1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.5
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2011 5 25 32 1 1 1 3 1 5}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiMgmt(5) huaweiDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierObjects(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiMgmt(5) huaweiDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierIndexNext(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiMgmt(5) hwDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierObjects(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiMgmt(5) hwDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierIndexNext(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) hwDeviceAdmin(5) huaweiDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierObjects(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) hwDeviceAdmin(5) huaweiDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierIndexNext(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) hwDeviceAdmin(5) hwDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierObjects(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) hwDeviceAdmin(5) hwDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierIndexNext(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiMgmt(5) huaweiDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierObjects(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiMgmt(5) huaweiDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierIndexNext(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiMgmt(5) hwDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierObjects(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiMgmt(5) hwDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierIndexNext(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) hwDeviceAdmin(5) huaweiDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierObjects(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) hwDeviceAdmin(5) huaweiDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierIndexNext(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) hwDeviceAdmin(5) hwDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierObjects(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) hwDeviceAdmin(5) hwDatacomm(25) hwQoS(32) hwCBQoSMIB(1) hwCBQoSObjects(1) hwCBQoSClassifierIndexNext(1) hwCBQoSMatchRuleCfgInfoTable(3) hwCBQoSMatchRuleCfgInfoEntry(1) hwCBQoSMatchRuleIntValue1(5)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/2011/5/25/32/1/1/1/3/1/5
  • /ISO/Identified-Organization/6/1/4/1/2011/5/25/32/1/1/1/3/1/5
  • /ISO/3/6/1/4/1/2011/5/25/32/1/1/1/3/1/5
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/huaweiMgmt/huaweiDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierObjects/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/huaweiMgmt/huaweiDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierIndexNext/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/huaweiMgmt/hwDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierObjects/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/huaweiMgmt/hwDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierIndexNext/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/hwDeviceAdmin/huaweiDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierObjects/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/hwDeviceAdmin/huaweiDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierIndexNext/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/hwDeviceAdmin/hwDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierObjects/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/hwDeviceAdmin/hwDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierIndexNext/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/huaweiMgmt/huaweiDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierObjects/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/huaweiMgmt/huaweiDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierIndexNext/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/huaweiMgmt/hwDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierObjects/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/huaweiMgmt/hwDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierIndexNext/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/hwDeviceAdmin/huaweiDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierObjects/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/hwDeviceAdmin/huaweiDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierIndexNext/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/hwDeviceAdmin/hwDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierObjects/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/hwDeviceAdmin/hwDatacomm/hwQoS/hwCBQoSMIB/hwCBQoSObjects/hwCBQoSClassifierIndexNext/hwCBQoSMatchRuleCfgInfoTable/hwCBQoSMatchRuleCfgInfoEntry/hwCBQoSMatchRuleIntValue1
  • Additional combinations skipped.

SNMP properties

Value type
Unsigned32
Maximum access defined by MIB
read-create
Status in MIB
current

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In HUAWEI-CBQOS-MIB, the row index consists of these components in order:

  1. hwCBQoSClassifierIndex (Integer32): one numeric subidentifier for the non-negative value.
  2. hwCBQoSMatchRuleIndex (Integer32): one numeric subidentifier for the non-negative value.

An instance has the form .1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.5.<hwCBQoSClassifierIndex>.<hwCBQoSMatchRuleIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.

Published row index variants: hwCBQoSClassifierIndex, hwCBQoSMatchRuleIndex; hwCBQoSClassifierIndex, hwCBQoSMatchRuleIndex, hwCBQoSMatchVlanBeginId.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.5

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

hwCBQoSMatchRuleIntValue1 · current

hwCBQoSMatchRuleIntValue1 OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType.
When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 10999.
When the type is ip-prec(5), the value of this object ranges from 2^0 to 2^7, respectively representing the IP precedence from 0 to 7.
When the type is dscp(6), the value ranges from 2^0 to 2^31, respectively representing the DSCP value ranging from 32 to 63.
When the type is ipv6-acl(14), the value of this object ranges from 2000 to 9999.
When the type is ipv6-dscp(18), the value of this object ranges from 0 to 63.
When the type is Ipv6-next-header(19), the value ranges from 0 to 255.
When the type is tcp-flag(27), the value ranges from 0 to 511.
When the types are ipv6-dst-ip(21) and ipv6-src-ip(22), the value is ip-address.
When the type is otherwise specified, the value of this object is displayed as the one configured using the command. If no value is configured, an invalid value (4294967295) is displayed.
                "
            ::= { hwCBQoSMatchRuleCfgInfoEntry 5 }

hwCBQoSMatchRuleIntValue1 · current

hwCBQoSMatchRuleIntValue1 OBJECT-TYPE
            SYNTAX Unsigned32
            MAX-ACCESS read-create
            STATUS current
            DESCRIPTION
                "Value of Match Rule.
                Acl(2):
                      Software QoS: 2000~3999  Hardware Qos: 10000~42767
                RtpPort(3): start-port: 2000~65535
                Protocol(4): 1(Ip)
                IpPrec(5):  value:0~7, up to 8 value can be input. The bit set
                            to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1
                            is used to indicate the value 0~7.
                            For example: 0x00000053(Binary format is 01010011)
                                         means the match rule is 'if-match ip-prec 0 1 4 6'
                Dscp(6):     value:0~63,up to 8 value can be input.
                             The bit set to 1 of hwCBQoSMatchRuleIntValue1 is
                             used to indicate the value 32~63.
                             The bit set to 1 of hwCBQoSMatchRuleIntValue2 is
                             used to indicate the value 0~31.
                             For example: 0x80000003 means the match rule is
                                          'if-match dscp 32 33 63'
                Vlan8021p(7): value:0~7, up to 8 value can be input. The bit
                              set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1
                              is used to indicate the 8 value 0~7.
                              For example: 0x53(Binary format is 01010011) means
                                           the match rule is 'if-match vlan 0 1 4 6'
                MplsExp(8): value:0~7, up to 8 value can be input. The bit set
                            to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1
                            is used to indicate the 8 value 0~7.
                            For example: 0x53(Binary format is 01010011) means
                            the match rule is 'if-match mpls 0 1 4 6'
                MacGroup(13): 1~63
                other type: Set is not permitted.  0xffffffff will be returned
                            when getting.
                "
            ::= { hwCBQoSMatchRuleCfgInfoEntry 5 }

Meaning

Descriptions

21 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 10999. When the type is ip-prec(5), the value of this object ranges from 2^0 to 2^7, respectively representing the IP precedence from 0 to 7. When the type is dscp(6), the value ranges from 2^0 to 2^31, respectively representing the DSCP value ranging from 32 to 63. When the type is ipv6-acl(14), the value of this object ranges from 2000 to 9999. When the type is ipv6-dscp(18), the value of this object ranges from 0 to 63. When the type is Ipv6-next-header(19), the value ranges from 0 to 255. When the type is tcp-flag(27), the value ranges from 0 to 511. When the types are ipv6-dst-ip(21) and ipv6-src-ip(22), the value is ip-address. When the type is otherwise specified, the value of this object is displayed as the one configured using the command. If no value is configured, an invalid value (4294967295) is displayed.

Sources for this description

Huawei MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies

See 4 matching source records

Description 2

This object indicates the rule content, which varies with the rule type (hwCBQoSMatchRuleType): If the rule based on ACLs is used, the value ranges from 2000 to 4999. If the rule based on the protocol type is used, the value is 1. If the rule based on the IPv6 protocol type is used, the value is 7. If the rule based on the TCP flag is used, the value of each flag bit is as follows: fin: 1 syn: 2 rst: 4 psh: 8 ack: 16 urg: 32 If multiple flag bits are configured, the value is the sum of the flag bits. If the rule based on the 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, MPLS EXP priority (only supported by the AR550E), or IP precedence is used, the value ranges from 1 to 255. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, MPLS EXP priority (only supported by the AR550E), or IP precedence a, the value is 2a. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, MPLS EXP priority (only supported by the AR550E), or IP precedence b, c, d, and others, the value is 2b+2c+2d+鈥�. If the rule based on the PVC is used, the value ranges from 0 to 255. If the rule based on 802.1p priorities is used, the value ranges from 0 to 7. If the rule based on DLCI values is used, the value ranges from 16 to 1022. If the rule based on Layer 2 protocols is used, the value ranges from 0x0 to 0xFFFF. The protocol value is as follows: ip: 0x0800 arp: 0x0806 mpls: 0x8847 rarp: 0x8035 For the DSCP, the value ranges from 0 to 4278190080 and depends on whether packets with DSCP values 32 to 63 are matched. To match DSCP a, the value is 2a-32. To match DSCP b, c, d鈥�, the value is 2b-32+2c-32+2d-32+鈥�. Default value: none.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 3

This object indicates the rule content, which varies with the rule type (hwCBQoSMatchRuleType): If the rule based on ACLs is used, the value ranges from 2000 to 4999. If the rule based on the protocol type is used, the value is 1. If the rule based on the IPv6 protocol type is used, the value is 7. If the rule based on the TCP flag is used, the value of each flag bit is as follows: fin: 1 syn: 2 rst: 4 psh: 8 ack: 16 urg: 32 If multiple flag bits are configured, the value is the sum of the flag bits. If the rule based on the 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, or IP precedence is used, the value ranges from 1 to 255. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, or IP precedence a, the value is 2a. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, or IP precedence b, c, d鈥�, the value is 2b+2c+2d+鈥�. If the rule based on the PVC is used, the value ranges from 0 to 255. If the rule based on 802.1p priorities is used, the value ranges from 0 to 7. If the rule based on DLCI values is used, the value ranges from 16 to 1022. If the rule based on Layer 2 protocols is used, the value ranges from 0x0 to 0xFFFF. The protocol value is as follows: ip: 0x0800 arp: 0x0806 rarp: 0x8035 For the DSCP, the value ranges from 0 to 4278190080 and depends on whether packets with DSCP values 32 to 63 are matched. To match DSCP a, the value is 2a-32. To match DSCP b, c, d鈥�, the value is 2b-32+2c-32+2d-32+鈥�. Default value: none.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 4

This object indicates the rule content, in the integer format. NOTE: This node is supported only on the CE8851-32CQ8DQ-P, CE8850-HAM, CE6863H, CE6863H-K, CE6866, CE6860-HAM, CE6881H, CE6881H-K, CE6885-LL (low latency mode), CE8851K, CE6860-SAN, CE8865, CE8875, CE8850-SAN, CE6866K, CE6885, CE6885H, CE6885-T, CE6885-LL (standard forwarding mode), CE6863E-48S8CQ, CE8855, CE8851-32CQ4BQ, CE6885-SAN, CE8865-SAN and CE6855-48XS8CQ.

Implementation notes: The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ...

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 5

The value is an integer. The value range depends on the rule type: If the rule is ipv4-acl, the value ranges from 2000 to 5999, 3000 to 3999, 4000 to 4099, 5000 to 5999, and 23000 to 23999. If the rule is ip-prec, the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation, each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1, the IP precedence is N. For example, if the IP precedences are 0, 3, 5, and 7, the values of the 0th, 3rd, 5th, and 7th bits starting from the lowest bit need to be set to 1. That is, the corresponding binary value is 1010 1001, and the value is 169. If the rule is dscp or ipv6-dscp, the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation, each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1, the DiffServ code is N plus 32. For example, if the DiffServ codes are 32, 35, 37, and 63, the values of the 0th, 3rd, 5th, and 31rd bits starting from the lowest bit need to be set to 1. That is, the corresponding binary value is 1000 0000 0000 0000 0000 0000 0010 1001, and the value is 2147483689. If the rule is vlan-8021p, the value ranges from 1 to 255. The value identifies an 802.1p priority in VLAN packets. In binary notation, each bit corresponds to one 802.1p priority. If the value of the Nth bit is set to 1, the value of the 802.1p priority is N. For example, if the 802.1p priorities are 0, 3, 5, and 7, the values of the 0th, 3rd, 5th, and 7th bits starting from the lowest bit need to be set to 1. That is, the corresponding binary value is 1010 1001, and the value is 169. If the rule is mpls-exp, the value ranges from 1 to 255. The value identifies an EXP priority. In binary notation, each bit corresponds to one EXP priority. If the value of the Nth bit is set to 1, the value of the EXP priority is N. For example, if the EXP priorities are 0, 3, 5, and 7, the values of the...

Implementation notes: The value is an integer. The value range depends on the rule type: If the rule is ipv4-acl, the value ranges from 2000 to 5999, 3000 to 3999, 4000 to 4099, 5000 to 5999, and 23000 to 23999. If the rule is ip-prec, the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation, each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1, the IP precedence is N. For example, if the IP precedences are 0, 3, 5, and 7, the values of the 0th, 3rd, 5th, and 7th bits starting from the lowest bit need to be set to 1. That is, the corresponding binary value is 1010 1001, and the value is 169. If the rule is dscp or ipv6-dscp, the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation, each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1, the DiffServ code is N plus 32. For example, if the DiffServ codes are 32, 35, 37, and 63, the values ...

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 6

This object indicates the rule content, in the integer format. NOTE: This node is supported only on the CE6866, CE6860-SAN, CE6860-HAM, CE6866K, CE8851, CE8850-SAN, CE8850-HAM, CE8851K, CE6863H, CE6863H-K, CE6881H and CE6881H-K.

Implementation notes: The value is an integer. The value range depends on the rule type: If the rule is ipv4-acl, the value ranges from 2000 to 5999, 3000 to 3999, 4000 to 4099, 5000 to 5999, and 23000 to 23999. If the rule is ip-prec, the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation, each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1, the IP precedence is N. For example, if the IP precedences are 0, 3, 5, and 7, the values of the 0th, 3rd, 5th, and 7th bits starting from the lowest bit need to be set to 1. That is, the corresponding binary value is 1010 1001, and the value is 169. If the rule is dscp or ipv6-dscp, the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation, each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1, the DiffServ code is N plus 32. For example, if the DiffServ codes are 32, 35, 37, and 63, the values ...

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 7

This object indicates the rule content. The value is an integer. The value range depends on the rule type: If the rule is acl, the value ranges from 2000 to 5999. If the rule is dscp, the value ranges from 0 to 63. If the rule is vlan-8021p, the value ranges from 0 to 7. If the rule is vlan-id, the value ranges from 1 to 4094. If the rule is l2-protocol, the value ranges from 0 to 65535. For example, if the l2-protocol is ARP, the value is 2054 (0x0806).

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 8

This object indicates the rule content, in the integer format.

Implementation notes: The value is an integer. The value range depends on the rule type: If the rule is ipv4-acl, the value ranges from 2000 to 5999, 3000 to 3999, 4000 to 4099, 5000 to 5999, and 23000 to 23999. If the rule is ip-prec, the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation, each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1, the IP precedence is N. For example, if the IP precedences are 0, 3, 5, and 7, the values of the 0th, 3rd, 5th, and 7th bits starting from the lowest bit need to be set to 1. That is, the corresponding binary value is 1010 1001, and the value is 169. If the rule is dscp or ipv6-dscp, the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation, each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1, the DiffServ code is N plus 32. For example, if the DiffServ codes are 32, 35, 37, and 63, the values ...

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 2 matching source records

Description 9

This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 10999. When the type is ip-prec(5), the value of this object ranges from 2^0 to 2^7, respectively representing the IP precedence from 0 to 7. When the type is dscp(6), the value ranges from 2^0 to 2^31, respectively representing the DSCP value ranging from 32 to 63. When the type is ipv6-acl(14), the value of this object ranges from 2000 to 9999. When the type is ipv6-dscp(18), the value of this object ranges from 0 to 63. When the type is Ipv6-next-header(19), the value ranges from 0 to 255. When the type is tcp-flag(27), the value ranges from 0 to 511. When the types are ipv6-dst-ip(21) and ipv6-src-ip(22), the value is ip-address. When the type is otherwise specified, the value of this object is displayed as the one configured using the command. If no value is configured, an invalid value (4294967295) is displayed.

Implementation notes: The actually supported access is read-only

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 4 matching source records

Description 10

This object indicates the rule content, which varies with the rule type (hwCBQoSMatchRuleType): If the rule based on ACLs is used, the value ranges from 2000 to 4999. If the rule based on the protocol type is used, the value is 1. If the rule based on the IPv6 protocol type is used, the value is 7. If the rule based on the TCP flag is used, the value of each flag bit is as follows: fin: 1 syn: 2 rst: 4 psh: 8 ack: 16 urg: 32 If multiple flag bits are configured, the value is the sum of the flag bits. If the rule based on the 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, MPLS EXP priority, or IP precedence is used, the value ranges from 1 to 255. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, MPLS EXP priority, or IP precedence a, the value is 2a. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, MPLS EXP priority, or IP precedence b, c, d鈥�, the value is 2b+2c+2d+鈥�. If the rule based on the PVC is used, the value ranges from 0 to 255. If the rule based on 802.1p priorities is used, the value ranges from 0 to 7. If the rule based on DLCI values is used, the value ranges from 16 to 1022. If the rule based on Layer 2 protocols is used, the value ranges from 0x0 to 0xFFFF. The protocol value is as follows: ip: 0x0800 arp: 0x0806 mpls: 0x8847 rarp: 0x8035 For the DSCP, the value ranges from 0 to 4278190080 and depends on whether packets with DSCP values 32 to 63 are matched. To match DSCP a, the value is 2a-32. To match DSCP b, c, d鈥�, the value is 2b-32+2c-32+2d-32+鈥�. Default value: none.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 11

This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 3999. When the type is ip-prec(5), the value of this object ranges from 2^1 to 2^7, respectively representing the IP precedence from 0 to 7. When the supported types are dscp(6) and ipv6-dscp(18), the value ranges from 2^1 to 2^32, respectively representing the DSCP value ranging from 32 to 63. When the type is ipv6-acl(14), the value of this object ranges from 2000 to 3999. When the type is ipv6-dscp(18), the value of this object ranges from 0 to 63. When the type is Ipv6-next-header(19), the value ranges from 0 to 255. When the types are ipv6-dst-ip(21) and ipv6-src-ip(22), the value ranges from 0 to 128. This object has no default value.

Implementation notes: This object is implemented as defined in the corresponding MIB file.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 12

This object indicates the rule content, in the integer format.

Implementation notes: The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ...

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 2 matching source records

Description 13

This object indicates the rule content, in the integer format. NOTE: This node is supported only on the CE8850-SAN, CE6881H, CE6881H-K, CE8855, CE8851-32CQ4BQ, CE6866, CE6860-HAM, CE8865-SAN, CE6863H, CE6863H-K, CE6885-LL (standard forwarding mode), CE6885H, CE6885, CE6885-T, CE6863E-48S8CQ, CE6885L, CE6885-SAN, CE8851K, CE8851-32CQ8DQ-P, CE8850-HAM, CE6855-48XS8CQ, CE6866K, CE6860-SAN, CE6885-LL (low latency mode), CE9865, CE9855, CE8865 and CE8875.

Implementation notes: The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ...

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 14

This object indicates the rule content. The value is an integer. The value range depends on the rule type: If the rule is acl, the value ranges from 2000 to 5999. If the rule is dscp, the value ranges from 0 to 63. If the rule is vlan-8021p, the value ranges from 0 to 7. If the rule is cvlan-8021p, the value ranges from 0 to 7. If the rule is vlan-id, the value ranges from 1 to 4094. If the rule is cvlan-id, the value ranges from 1 to 4094. If the rule is l2-protocol, the value ranges from 0 to 65535. For example, if the l2-protocol is ARP, the value is 2054 (0x0806).

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 3 matching source records

Description 15

This object indicates the rule content, which varies with the rule type (hwCBQoSMatchRuleType): If the rule based on ACLs is used, the value ranges from 2000 to 4999. If the rule based on the protocol type is used, the value is 1. If the rule based on the IPv6 protocol type is used, the value is 7. If the rule based on the TCP flag is used, the value of each flag bit is as follows: fin: 1 syn: 2 rst: 4 psh: 8 ack: 16 urg: 32 If multiple flag bits are configured, the value is the sum of the flag bits. If the rule based on the 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, MPLS EXP priority (not supported by the AR100&AR120&AR150&AR160&AR200), or IP precedence is used, the value ranges from 1 to 255. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, MPLS EXP priority (not supported by the AR100&AR120&AR150&AR160&AR200), or IP precedence a, the value is 2a. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, MPLS EXP priority (not supported by the AR100&AR120&AR150&AR160&AR200), or IP precedence b, c, d, and others, the value is 2b+2c+2d+鈥�. If the rule based on the PVC is used, the value ranges from 0 to 255. If the rule based on 802.1p priorities is used, the value ranges from 0 to 7. If the rule based on DLCI values is used, the value ranges from 16 to 1022. If the rule based on Layer 2 protocols is used, the value ranges from 0x0 to 0xFFFF. The protocol value is as follows: ip: 0x0800 arp: 0x0806 mpls: 0x8847 rarp: 0x8035 For the DSCP, the value ranges from 0 to 4278190080 and depends on whether packets with DSCP values 32 to 63 are matched. To match DSCP a, the value is 2a-32. To match DSCP b, c, d鈥�, the value is 2b-32+2c-32+2d-32+鈥�. Default value: none.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 16

This object indicates the rule content, in the integer format. NOTE: This node is supported only on the CE6866, CE6860-HAM, CE6885-LL (low latency mode), CE9855, CE8855, CE8851-32CQ4BQ, CE8865, CE8875, CE6860-SAN, CE6885-LL (standard forwarding mode), CE6885H, CE6885, CE6885-T, CE6863E-48S8CQ, CE6863H, CE6863H-K, CE6855-48XS8CQ, CE8851K, CE6881H, CE6881H-K, CE6866K, CE6885-SAN, CE8851-32CQ8DQ-P, CE8850-HAM, CE8865-SAN and CE8850-SAN.

Implementation notes: The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ...

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 17

This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 10999. When the type is ip-prec(5), the value of this object ranges from 2^0 to 2^7, respectively representing the IP precedence from 0 to 7. When the type is dscp(6), the value ranges from 2^0 to 2^31, respectively representing the DSCP value ranging from 32 to 63. When the type is ipv6-acl(14), the value of this object ranges from 2000 to 9999. When the type is ipv6-dscp(18), the value of this object ranges from 0 to 63. When the type is Ipv6-next-header(19), the value ranges from 0 to 255. When the type is tcp-flag(27), the value ranges from 0 to 511. When the types are ipv6-dst-ip(21) and ipv6-src-ip(22), the value is ip-address. When the type is otherwise specified, the value of this object is displayed as the one configured using the command. If no value is configured, an invalid value (4294967295) is displayed.

Implementation notes: The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ...

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 4 matching source records

Description 18

This object indicates the rule content. The value is an integer. The value range depends on the rule type: If the rule is acl, the value ranges from 2000 to 5999. If the rule is dscp, the value ranges from 0 to 63. If the rule is vlan-8021p, the value ranges from 0 to 7. If the rule is cvlan-8021p, the value ranges from 0 to 7. If the rule is vlan-id, the value ranges from 1 to 4094. If the rule is cvlan-id, the value ranges from 1 to 4094. If the rule is l2-protocol, the value ranges from 0 to 65535. For example, if the l2-protocol is ARP, the value is 2054 (0x0806).

Implementation notes: Read-create

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 3 matching source records

Description 19

This object indicates the rule content, which varies with the rule type (hwCBQoSMatchRuleType): If the rule based on ACLs is used, the value ranges from 2000 to 4999. If the rule based on the protocol type is used, the value is 1. If the rule based on the IPv6 protocol type is used, the value is 7. If the rule based on the TCP flag is used, the value of each flag bit is as follows: fin: 1 syn: 2 rst: 4 psh: 8 ack: 16 urg: 32 If multiple flag bits are configured, the value is the sum of the flag bits. If the rule based on the 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, or IP precedence is used, the value ranges from 1 to 255. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, or IP precedence a, the value is 2a. To match 802.1p priority, 802.1p priority in inner VLAN tags in QinQ packets, or IP precedence b, c, d鈥�, the value is 2b+2c+2d+鈥�. If the rule based on the PVC is used, the value ranges from 0 to 255. If the rule based on 802.1p priorities is used, the value ranges from 0 to 7. If the rule based on DLCI values is used, the value ranges from 16 to 1022. If the rule based on Layer 2 protocols is used, the value ranges from 0x0 to 0xFFFF. The protocol value is as follows: ip: 0x0800 arp: 0x0806 mpls: 0x8847 rarp: 0x8035 For the DSCP, the value ranges from 0 to 4278190080 and depends on whether packets with DSCP values 32 to 63 are matched. To match DSCP a, the value is 2a-32. To match DSCP b, c, d鈥�, the value is 2b-32+2c-32+2d-32+鈥�. Default value: none.

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 1 matching source record

Description 20

This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 10999. When the type is ip-prec(5), the value of this object ranges from 2^0 to 2^7, respectively representing the IP precedence from 0 to 7. When the type is dscp(6), the value ranges from 2^0 to 2^31, respectively representing the DSCP value ranging from 32 to 63. When the type is ipv6-acl(14), the value of this object ranges from 2000 to 9999. When the type is ipv6-dscp(18), the value of this object ranges from 0 to 63. When the type is Ipv6-next-header(19), the value ranges from 0 to 255. When the type is tcp-flag(27), the value ranges from 0 to 511. When the types are ipv6-dst-ip(21) and ipv6-src-ip(22), the value is ip-address. When the type is otherwise specified, the value of this object is displayed as the one configured using the command. If no value is configured, an invalid value (4294967295) is displayed.

Implementation notes: The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 2999; 3000 to 3999; 4000 to 4999; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 0 to 7. The value identifies an IP precedence. - If the rule is dscp or ipv6-dscp; the value ranges from 0 to 63. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the values of the 0th; 3rd; 5th; and 31rd bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1000 0000 0000 0000 0000 0000 0010 1001; and the value is 2147483689. - If the rule is vlan-8021p; the value ranges from 1 to 255. The value identifies an 802.1p priority in VLAN packets. In binary notation; each bit corresponds...

Sources for this description

Huawei official enterprise MIB Query and object descriptions

See 4 matching source records

Description 21

Value of Match Rule. Acl(2): Software QoS: 2000~3999 Hardware Qos: 10000~42767 RtpPort(3): start-port: 2000~65535 Protocol(4): 1(Ip) IpPrec(5): value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. For example: 0x00000053(Binary format is 01010011) means the match rule is 'if-match ip-prec 0 1 4 6' Dscp(6): value:0~63,up to 8 value can be input. The bit set to 1 of hwCBQoSMatchRuleIntValue1 is used to indicate the value 32~63. The bit set to 1 of hwCBQoSMatchRuleIntValue2 is used to indicate the value 0~31. For example: 0x80000003 means the match rule is 'if-match dscp 32 33 63' Vlan8021p(7): value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1 is used to indicate the 8 value 0~7. For example: 0x53(Binary format is 01010011) means the match rule is 'if-match vlan 0 1 4 6' MplsExp(8): value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1 is used to indicate the 8 value 0~7. For example: 0x53(Binary format is 01010011) means the match rule is 'if-match mpls 0 1 4 6' MacGroup(13): 1~63 other type: Set is not permitted. 0xffffffff will be returned when getting.

Sources for this description

H3C and HH3C MIB copies (Observium Community)

See 1 matching source record

Evidence

Source records

22 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1, 9, 17, 20Huawei MIB copies (LibreNMS/Observium Community), Huawei official enterprise MIB Query and object descriptions, and others4 records · 5 sources

Description 1 · Description 9 · Description 17 · Description 20

hwCBQoSMatchRuleIntValue1 · currentHuawei MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies2 sources

Status in source: current.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "hwCBQoSMatchRuleIntValue1",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 10999. When the type is ip-prec(5), the value of this object ranges from 2^0 to 2^7, respectively representing the IP precedence from 0 to 7. When the type is dscp(6), the value ranges from 2^0 to 2^31, respectively representing the DSCP value ranging from 32 to 63. When the type is ipv6-acl(14), the value of this object ranges from 2000 to 9999. When the type is ipv6-dscp(18), the value of this object ranges from 0 to 63. When the type is Ipv6-next-header(19), the value ranges from 0 to 255. When the type is tcp-flag(27), the value ranges from 0 to 511. When the types are ipv6-dst-ip(21) and ipv6-src-ip(22), the value is ip-address. When the type is otherwise specified, the value of this object is displayed as the one configured using the command. If no value is configured, an invalid value (4294967295) is displayed. \"",
    "::=",
    "{",
    "hwCBQoSMatchRuleCfgInfoEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object indicates the rule contents. The value range and the default value of the object vary with hwCBQoSMatchRuleType. When the supported type is ipv4-acl(2), the value of this object ranges from 2000 to 10999. When the type is ip-prec(5), the value of this object ranges from 2^0 to 2^7, respectively representing the IP precedence from 0 to 7. When the type is dscp(6), the value ranges from 2^0 to 2^31, respectively representing the DSCP value ranging from 32 to 63. When the type is ipv6-acl(14), the value of this object ranges from 2000 to 9999. When the type is ipv6-dscp(18), the value of this object ranges from 0 to 63. When the type is Ipv6-next-header(19), the value ranges from 0 to 255. When the type is tcp-flag(27), the value ranges from 0 to 511. When the types are ipv6-dst-ip(21) and ipv6-src-ip(22), the value is ip-address. When the type is otherwise specified, the value of this object is displayed as the one configured using the command. If no value is configured, an invalid value (4294967295) is displayed."
    ],
    null,
    null,
    null,
    null
  ]
}
hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source
hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ..."
}
hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 2999; 3000 to 3999; 4000 to 4999; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 0 to 7. The value identifies an IP precedence. - If the rule is dscp or ipv6-dscp; the value ranges from 0 to 63. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the values of the 0th; 3rd; 5th; and 31rd bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1000 0000 0000 0000 0000 0000 0010 1001; and the value is 2147483689. - If the rule is vlan-8021p; the value ranges from 1 to 255. The value identifies an 802.1p priority in VLAN packets. In binary notation; each bit corresponds..."
}
Records for description 2Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 2

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column"
}
Records for description 3Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 3

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column"
}
Records for description 4Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 4

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ..."
}
Records for description 5Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 5

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The value is an integer. The value range depends on the rule type: If the rule is ipv4-acl, the value ranges from 2000 to 5999, 3000 to 3999, 4000 to 4099, 5000 to 5999, and 23000 to 23999. If the rule is ip-prec, the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation, each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1, the IP precedence is N. For example, if the IP precedences are 0, 3, 5, and 7, the values of the 0th, 3rd, 5th, and 7th bits starting from the lowest bit need to be set to 1. That is, the corresponding binary value is 1010 1001, and the value is 169. If the rule is dscp or ipv6-dscp, the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation, each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1, the DiffServ code is N plus 32. For example, if the DiffServ codes are 32, 35, 37, and 63, the values ..."
}
Records for description 6Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 6

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The value is an integer. The value range depends on the rule type: If the rule is ipv4-acl, the value ranges from 2000 to 5999, 3000 to 3999, 4000 to 4099, 5000 to 5999, and 23000 to 23999. If the rule is ip-prec, the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation, each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1, the IP precedence is N. For example, if the IP precedences are 0, 3, 5, and 7, the values of the 0th, 3rd, 5th, and 7th bits starting from the lowest bit need to be set to 1. That is, the corresponding binary value is 1010 1001, and the value is 169. If the rule is dscp or ipv6-dscp, the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation, each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1, the DiffServ code is N plus 32. For example, if the DiffServ codes are 32, 35, 37, and 63, the values ..."
}
Records for description 7Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 7

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "INTEGER (0..4294967295)",
  "max_access": "read-create",
  "object_class": "table column"
}
Records for description 8, 12Huawei official enterprise MIB Query and object descriptions2 records · 2 sources

Description 8 · Description 12

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The value is an integer. The value range depends on the rule type: If the rule is ipv4-acl, the value ranges from 2000 to 5999, 3000 to 3999, 4000 to 4099, 5000 to 5999, and 23000 to 23999. If the rule is ip-prec, the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation, each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1, the IP precedence is N. For example, if the IP precedences are 0, 3, 5, and 7, the values of the 0th, 3rd, 5th, and 7th bits starting from the lowest bit need to be set to 1. That is, the corresponding binary value is 1010 1001, and the value is 169. If the rule is dscp or ipv6-dscp, the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation, each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1, the DiffServ code is N plus 32. For example, if the DiffServ codes are 32, 35, 37, and 63, the values ..."
}
hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ..."
}
Records for description 10Huawei official enterprise MIB Query and object descriptions1 record · 1 source
Records for description 11Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 11

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "This object is implemented as defined in the corresponding MIB file."
}
Records for description 13Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 13

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ..."
}
Records for description 14, 18Huawei official enterprise MIB Query and object descriptions3 records · 3 sources

Description 14 · Description 18

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column"
}
hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source
hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "object_class": "table column",
  "implementation_notes": "Read-create"
}
Records for description 15Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 15

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column"
}
Records for description 16Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 16

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column",
  "implementation_notes": "The value is an integer. The value range depends on the rule type: - If the rule is ipv4-acl; the value ranges from 2000 to 5999; 3000 to 3999; 4000 to 4099; 5000 to 5999; and 23000 to 23999. - If the rule is ip-prec; the value ranges from 1 to 255. The value identifies an IP precedence. In binary notation; each bit corresponds to one IP precedence. If the value of the Nth bit is set to 1; the IP precedence is N. For example; if the IP precedences are 0; 3; 5; and 7; the values of the 0th; 3rd; 5th; and 7th bits starting from the lowest bit need to be set to 1. That is; the corresponding binary value is 1010 1001; and the value is 169. - If the rule is dscp or ipv6-dscp; the value ranges from 1 to 4294967295. The value identifies the high-order DiffServ code (32nd bit to 63rd bit). In binary notation; each bit corresponds to one DiffServ code. If the value of the Nth bit is set to 1; the DiffServ code is N plus 32. For example; if the DiffServ codes are 32; 35; 37; and 63; the ..."
}
Records for description 19Huawei official enterprise MIB Query and object descriptions1 record · 1 source

Description 19

hwCBQoSMatchRuleIntValue1 · unspecifiedHuawei official enterprise MIB Query and object descriptions1 source

Status in source: unspecified.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "syntax": "Unsigned32",
  "max_access": "read-create",
  "object_class": "table column"
}
Records for description 21H3C and HH3C MIB copies (Observium Community)1 record · 1 source

Description 21

hwCBQoSMatchRuleIntValue1 · currentH3C and HH3C MIB copies (Observium Community)1 source

Status in source: current.

Names: hwCBQoSMatchRuleIntValue1

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "hwCBQoSMatchRuleIntValue1",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Value of Match Rule. Acl(2): Software QoS: 2000~3999 Hardware Qos: 10000~42767 RtpPort(3): start-port: 2000~65535 Protocol(4): 1(Ip) IpPrec(5): value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. For example: 0x00000053(Binary format is 01010011) means the match rule is 'if-match ip-prec 0 1 4 6' Dscp(6): value:0~63,up to 8 value can be input. The bit set to 1 of hwCBQoSMatchRuleIntValue1 is used to indicate the value 32~63. The bit set to 1 of hwCBQoSMatchRuleIntValue2 is used to indicate the value 0~31. For example: 0x80000003 means the match rule is 'if-match dscp 32 33 63' Vlan8021p(7): value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1 is used to indicate the 8 value 0~7. For example: 0x53(Binary format is 01010011) means the match rule is 'if-match vlan 0 1 4 6' MplsExp(8): value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1 is used to indicate the 8 value 0~7. For example: 0x53(Binary format is 01010011) means the match rule is 'if-match mpls 0 1 4 6' MacGroup(13): 1~63 other type: Set is not permitted. 0xffffffff will be returned when getting. \"",
    "::=",
    "{",
    "hwCBQoSMatchRuleCfgInfoEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Value of Match Rule. Acl(2): Software QoS: 2000~3999 Hardware Qos: 10000~42767 RtpPort(3): start-port: 2000~65535 Protocol(4): 1(Ip) IpPrec(5): value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1 is used to indicate the value 0~7. For example: 0x00000053(Binary format is 01010011) means the match rule is 'if-match ip-prec 0 1 4 6' Dscp(6): value:0~63,up to 8 value can be input. The bit set to 1 of hwCBQoSMatchRuleIntValue1 is used to indicate the value 32~63. The bit set to 1 of hwCBQoSMatchRuleIntValue2 is used to indicate the value 0~31. For example: 0x80000003 means the match rule is 'if-match dscp 32 33 63' Vlan8021p(7): value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1 is used to indicate the 8 value 0~7. For example: 0x53(Binary format is 01010011) means the match rule is 'if-match vlan 0 1 4 6' MplsExp(8): value:0~7, up to 8 value can be input. The bit set to 1 of the last 8 bits of hwCBQoSMatchRuleIntValue1 is used to indicate the 8 value 0~7. For example: 0x53(Binary format is 01010011) means the match rule is 'if-match mpls 0 1 4 6' MacGroup(13): 1~63 other type: Set is not permitted. 0xffffffff will be returned when getting."
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2011)

Lwu Zhao

Siblings (17)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.1 hwCBQoSMatchRuleIndex00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.2 hwCBQoSMatchRuleIfNot00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.3 hwCBQoSMatchRuleType00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.4 hwCBQoSMatchRuleStringValue00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.6 hwCBQoSMatchRuleIntValue200
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.7 hwCBQoSMatchRuleRowStatus00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.8 hwCBQoSMatchMacMask00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.9 hwCBQoSMatchVlanBeginId00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.10 hwCBQoSMatchVlanEndId00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.11 hwCBQoSMatchInnerSrcIp00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.12 hwCBQoSMatchInnerSrcIpMask00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.13 hwCBQoSMatchInnerDstIp00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.14 hwCBQoSMatchInnerDstIpMask00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.15 hwCBQoSMatchInnerSrcPort00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.16 hwCBQoSMatchInnerDstPort00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.17 hwCBQoSMatchInnerProtocol00
1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.18 hwCBQoSMatchVxlanVni00