Description 1
The discarded packet number of queue.
Sources for this description
H3C and HH3C MIB copies (Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.2011.5.25.32.2.1.1.5
The discarded packet number of queue.
Identification
{1 3 6 1 4 1 2011 5 25 32 2 1 1 5}
Definitions may combine these properties differently.
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HUAWEI-IF-QOS-MIB, the row index qosFIFOIfIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.2011.5.25.32.2.1.1.5.<qosFIFOIfIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2011.5.25.32.2.1.1.5
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
qosFIFODiscardPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The discarded packet number of queue."
::= { qosFIFOEntry 5 }qosFIFODiscardPkt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The count of discarded packets which can't be enqueued fifo queue
because the fifo queue is full."
::= { qosFIFOEntry 5 }qosFIFODiscardPkt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The count of discarded packets which can't be enqueued fifo queue
because the fifo queue is full."
::= { qosFIFOEntry 5 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The discarded packet number of queue.
H3C and HH3C MIB copies (Observium Community)Netdisco MIB archive copies
Description 2
The count of discarded packets which can't be enqueued fifo queue because the fifo queue is full.
Huawei MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: qosFIFODiscardPkt
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"qosFIFODiscardPkt",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The discarded packet number of queue.\"",
"::=",
"{",
"qosFIFOEntry",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The discarded packet number of queue."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. H3C and HH3C support.
Module: HUAWEI-IF-QOS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'Counter32'], 'HUAWEI-3COM-OID-MIB': ['hwQoS']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: HUAWEI-IF-QOS-MIB
{'SNMPv2-TC': ['RowStatus'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'Counter32'], 'HUAWEI-3COM-OID-MIB': ['hwQoS']}Related source files and packages:
Status in source: mandatory.
Names: qosFIFODiscardPkt
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"qosFIFODiscardPkt",
"OBJECT-TYPE",
"SYNTAX",
"Counter",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The count of discarded packets which can't be enqueued fifo queue because the fifo queue is full.\"",
"::=",
"{",
"qosFIFOEntry",
"5",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The count of discarded packets which can't be enqueued fifo queue because the fifo queue is full."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Huawei support.
Module: HUAWEI-IF-QOS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus'], 'HUAWEI-MIB': ['hwDatacomm'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'Counter32']}Related source files and packages:
Vendor MIB copy from the Observium Community archive. Huawei support.
Module: HUAWEI-IF-QOS-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus'], 'HUAWEI-MIB': ['hwDatacomm'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'Counter32']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.32.2.1.1.1 | qosFIFOIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.32.2.1.1.2 | qosFIFOIfName | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.32.2.1.1.3 | qosFIFOMaxQueueLen | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.32.2.1.1.4 | qosFIFOCurQueueLen | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.32.2.1.1.6 | qosUndoFIFO | 0 | 0 |