Description 1
Unit:second. Configure the aging time of the router port. 0:180s or holdtime in hello
Sources for this description
Huawei MIB copies (LibreNMS/Observium Community)MIBdepotNetdisco MIB archive copies
OID reference
1.3.6.1.4.1.2011.5.25.44.1.2.1.1.3
Unit:second. Configure the aging time of the router port. 0:180s or holdtime in hello
Identification
{1 3 6 1 4 1 2011 5 25 44 1 2 1 1 3}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: hwVlanIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2011.5.25.44.1.2.1.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
hwVlanRouterAgingTime OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unit:second.
Configure the aging time of the router port.
0:180s or holdtime in hello"
::= {hwVlanCfgEntry 3}hwVlanRouterAgingTime OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unit:second.
Configure the aging time of the router port.
0:180s or holdtime in hello"
::= {hwVlanCfgEntry 3}
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Unit:second. Configure the aging time of the router port. 0:180s or holdtime in hello
Huawei MIB copies (LibreNMS/Observium Community)MIBdepotNetdisco MIB archive copies
Description 2
This object indicates the timeout interval of an interface, in seconds. The default value is 180. Note: If the value is 0, which is equivalent to an undo command, it indicates that the timeout duration is 180 seconds or the time carried in a PIM hello message.
Implementation notes: This object is implemented as defined in the corresponding MIB file.
Huawei official enterprise MIB Query and object descriptions
Description 3
This object indicates the timeout interval of an interface, in seconds. The value ranges from 0 to 1000. The default value is 180. Note: If the value is 0, which is equivalent to an undo command, it indicates that the timeout duration is 180 seconds or the time carried in a PIM hello message.
Huawei official enterprise MIB Query and object descriptions
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: hwVlanRouterAgingTime
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwVlanRouterAgingTime",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Unit:second. Configure the aging time of the router port. 0:180s or holdtime in hello\"",
"::=",
"{",
"hwVlanCfgEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Unit:second. Configure the aging time of the router port. 0:180s or holdtime in hello"
],
null,
null,
null,
null
]
}Module: HUAWEI-MULTICAST-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address', 'Ipv6IfIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'DisplayString'], 'HUAWEI-MIB': ['hwDatacomm'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Integer32', 'Unsigned32', 'IpAddress', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'HUAWEI-L2VLAN-MIB': ['hwL2VlanIndex', 'hwL2VlanDescr']}Vendor MIB copy from the LibreNMS archive. Huawei support.
Module: HUAWEI-MULTICAST-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address', 'Ipv6IfIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'DisplayString'], 'HUAWEI-MIB': ['hwDatacomm'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Integer32', 'Unsigned32', 'IpAddress', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'HUAWEI-L2VLAN-MIB': ['hwL2VlanIndex', 'hwL2VlanDescr']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the Netdisco archive.
Module: HUAWEI-MULTICAST-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IPV6-TC': ['Ipv6Address', 'Ipv6IfIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'DisplayString'], 'HUAWEI-MIB': ['hwDatacomm'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Integer32', 'Unsigned32', 'IpAddress', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddress', 'InetAddressType'], 'HUAWEI-L2VLAN-MIB': ['hwL2VlanIndex', 'hwL2VlanDescr']}Related source files and packages:
Status in source: unspecified.
Names: hwVlanRouterAgingTime
{
"syntax": "Integer32(0鈥�1000)",
"max_access": "read-write",
"object_class": "table column",
"implementation_notes": "This object is implemented as defined in the corresponding MIB file."
}Module: HUAWEI-MULTICAST-MIB
· Download Huawei MIB Query — HUAWEI-MULTICAST-MIB (derived data index)Related source files and packages:
Browse all related files for Huawei MIB Query — HUAWEI-MULTICAST-MIB (derived data index)
Status in source: unspecified.
Names: hwVlanRouterAgingTime
{
"syntax": "Integer32",
"max_access": "read-write",
"object_class": "table column"
}Module: HUAWEI-MULTICAST-MIB
Related source files and packages:
Browse all related files for Huawei MIB Query — HUAWEI-MULTICAST-MIB (derived data index)
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.1 | hwVlanIndex | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.2 | hwVlanIgmpSnoopingEnabled | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.4 | hwVlanMaxQueryRespTime | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.5 | hwVlanLastMemQueryInt | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.6 | hwVlanQueryInt | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.7 | hwVlanRobustCount | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.8 | hwVlanCheckRouterAlert | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.9 | hwVlanSendRouterAlert | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.10 | hwVlanIgmpVersion | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.11 | hwVlanPromptLeaveEnable | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.12 | hwVlanPromptLeaveAclNum | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.13 | hwVlanDropUnknown | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.14 | hwVlanLimitAction | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.15 | hwVlanIgmpSnoopingQuerierEnabled | 0 | 0 | |
| 1.3.6.1.4.1.2011.5.25.44.1.2.1.1.16 | hwVlanIgmpSnoopingProxy | 0 | 0 |