OID reference

hwadsl2SCStatusTable

1.3.6.1.4.1.2011.6.138.1.2.2

Description

The table hwadsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The following points apply to this table: 1. The main purpose of this table is to hold the results of a DELT. 2. This table also holds parameters obtained at line initialization time. 3. The rows in this table are volatile; that is, t…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2011.6.138.1.2 (hwadsl2Status)
Node code
2
Node name
hwadsl2SCStatusTable
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2011.6.138.1.2.2
URN notation
urn:oid:1.3.6.1.4.1.2011.6.138.1.2.2
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2011 6 138 1 2 2}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) huawei(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) iMAP(2011) huaweiUtility(6) hwadsl2MIB(138) hwadsl2(1) hwadsl2Status(2) hwadsl2SCStatusTable(2)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/2011/6/138/1/2/2
  • /ISO/Identified-Organization/6/1/4/1/2011/6/138/1/2/2
  • /ISO/3/6/1/4/1/2011/6/138/1/2/2
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/identified-organization/dod/internet/private/enterprise/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/identified-organization/dod/internet/private/enterprises/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/identified-organization/dod/internet/private/enterprises/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/identified-organization/dod/internet/private/vendor-objects/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/identified-organization/dod/internet/private/vendor-objects/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/org/dod/internet/private/enterprise/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/org/dod/internet/private/enterprise/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/org/dod/internet/private/enterprises/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/org/dod/internet/private/enterprises/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/org/dod/internet/private/ldap-enterprise/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/org/dod/internet/private/ldap-enterprise/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/org/dod/internet/private/vendor-objects/huawei/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • /iso/org/dod/internet/private/vendor-objects/iMAP/huaweiUtility/hwadsl2MIB/hwadsl2/hwadsl2Status/hwadsl2SCStatusTable
  • Additional combinations skipped.

SNMP properties

Value type
SEQUENCE OF Hwadsl2SCStatusEntry
Maximum access defined by MIB
not-accessible
Status in MIB
current

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

hwadsl2SCStatusTable  OBJECT-TYPE
            SYNTAX      SEQUENCE  OF  Hwadsl2SCStatusEntry
            MAX-ACCESS  not-accessible
            STATUS      current
            DESCRIPTION
                "The table hwadsl2SCStatusTable contains status parameters
                 of the ADSL2 sub-carriers.  The following points apply to this
                 table:
                 1.  The main purpose of this table is to hold the results
                     of a DELT.
                 2.  This table also holds parameters obtained at line
                     initialization time.
                 3.  The rows in this table are volatile; that is, they are
                     lost if the SNMP agent is rebooted.
                 4.  Due to the large OCTET STRING attributes in this table,
                     the worst case memory requirements for this table are
                     very high.  The manager may use the row status attribute
                     of this table to delete rows in order to reclaim memory.
                 5.  The manager may create rows in this table.  The SNMP
                     agent may create rows in this table.  Only the manager
                     may delete rows in this table.
                 6.  The maximum number of rows allowable in this table is
                     indicated by the scalar attribute
                     adsl2ScalarSCMaxInterfaces.
                     The number of rows available in this table is indicated
                     by the scalar attribute adsl2ScalarSCAvailInterfaces.
                 7.  The SNMP agent is permitted to create rows in this table
                     when a DELT completes successfully or when line
                     initialization occurs.  It is not mandatory for the SNMP
                     agent to create rows in this table; hence, it may be
                     necessary for the manager to create rows in this table
                     before any results can be stored.
                 8.  If the manager attempts to create a row in this table
                     and there are no more rows available, the creation
                     attempt will fail, and the response to the SNMP SET PDU
                     will contain the error noCreation(11).
                 9.  If the SNMP agent attempts to create a row in this table
                     and there are no more rows available, the creation
                     attempt will fail, and the attribute
                     adsl2LineCmndConfLdsfFailReason will indicate the
                     reason for the failure.  The failure reason will be either
                     tableFull(10) or noResources(11).
                 10. An example of use of this table is as follows:
                     Step 1. : The DELT is started by setting the
                             : adsl2LineCmndConfLdsf from inhibit to force.
                     Step 2. : The DELT completes, and valid data is
                             : available.
                     Step 3. : The row in the adsl2SCStatusTable where the
                             : results will be stored does not yet exist so
                             : the SNMP agent attempts to create the row.
                     Step 4. : Due to a low memory condition, a row in the
                             : adsl2SCStatusTable table cannot be created at
                             : this time.
                     Step 5. : The reason for the failure, tableFull(10), is
                             : indicated in the adsl2LineCmndConfLdsfFailReason
                             : attribute.
                 11. Another example of use of this table is as follows :
                     Step 1. : The DELT is started by setting the
                             : adsl2LineCmndConfLdsf from inhibit to force.
                     Step 2. : The DELT completes and valid data is
                             : available.
                     Step 3. : The row in the adsl2SCStatusTable where the
                             : results will be stored does not yet exist so
                             : the SNMP agent attempts to create the row.
                     Step 4. : The row creation is successful.
                     Step 5. : The value of the attribute
                             : adsl2LineCmndConfLdsfFailReasonreason is set
                             : to success(2).
                 12. Another example of use of this table is as follows:
                     Step 1. : The manager creates a row in adsl2SCStatusTable
                             : for a particular ADSL2 line.
                     Step 2. : The DELT is started on the above-mentioned
                             : line by setting the adsl2LineCmndConfLdsf from
                             : inhibit to force.
                     Step 3. : The DELT completes, and valid data is
                             : available.
                     Step 4. : The value of the attribute
                             : adsl2LineCmndConfLdsfFailReasonreason is set
                             : to success(2).
                 The indexes of this table are ifIndex and adsl2SCStatusDirection.
                " 
            ::= { hwadsl2Status 2 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The table hwadsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The following points apply to this table: 1. The main purpose of this table is to hold the results of a DELT. 2. This table also holds parameters obtained at line initialization time. 3. The rows in this table are volatile; that is, they are lost if the SNMP agent is rebooted. 4. Due to the large OCTET STRING attributes in this table, the worst case memory requirements for this table are very high. The manager may use the row status attribute of this table to delete rows in order to reclaim memory. 5. The manager may create rows in this table. The SNMP agent may create rows in this table. Only the manager may delete rows in this table. 6. The maximum number of rows allowable in this table is indicated by the scalar attribute adsl2ScalarSCMaxInterfaces. The number of rows available in this table is indicated by the scalar attribute adsl2ScalarSCAvailInterfaces. 7. The SNMP agent is permitted to create rows in this table when a DELT completes successfully or when line initialization occurs. It is not mandatory for the SNMP agent to create rows in this table; hence, it may be necessary for the manager to create rows in this table before any results can be stored. 8. If the manager attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the response to the SNMP SET PDU will contain the error noCreation(11). 9. If the SNMP agent attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the attribute adsl2LineCmndConfLdsfFailReason will indicate the reason for the failure. The failure reason will be either tableFull(10) or noResources(11). 10. An example of use of this table is as follows: Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes, and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : Due to a low memory condition, a row in the : adsl2SCStatusTable table cannot be created at : this time. Step 5. : The reason for the failure, tableFull(10), is : indicated in the adsl2LineCmndConfLdsfFailReason : attribute. 11. Another example of use of this table is as follows : Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : The row creation is successful. Step 5. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). 12. Another example of use of this table is as follows: Step 1. : The manager creates a row in adsl2SCStatusTable : for a particular ADSL2 line. Step 2. : The DELT is started on the above-mentioned : line by setting the adsl2LineCmndConfLdsf from : inhibit to force. Step 3. : The DELT completes, and valid data is : available. Step 4. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). The indexes of this table are ifIndex and adsl2SCStatusDirection.

Sources for this description

Huawei MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Huawei MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

hwadsl2SCStatusTable · currentHuawei MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: hwadsl2SCStatusTable

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "hwadsl2SCStatusTable",
    "OBJECT-TYPE",
    "SYNTAX",
    "SEQUENCE",
    "OF",
    "Hwadsl2SCStatusEntry",
    "MAX-ACCESS",
    "not-accessible",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The table hwadsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The following points apply to this table: 1. The main purpose of this table is to hold the results of a DELT. 2. This table also holds parameters obtained at line initialization time. 3. The rows in this table are volatile; that is, they are lost if the SNMP agent is rebooted. 4. Due to the large OCTET STRING attributes in this table, the worst case memory requirements for this table are very high. The manager may use the row status attribute of this table to delete rows in order to reclaim memory. 5. The manager may create rows in this table. The SNMP agent may create rows in this table. Only the manager may delete rows in this table. 6. The maximum number of rows allowable in this table is indicated by the scalar attribute adsl2ScalarSCMaxInterfaces. The number of rows available in this table is indicated by the scalar attribute adsl2ScalarSCAvailInterfaces. 7. The SNMP agent is permitted to create rows in this table when a DELT completes successfully or when line initialization occurs. It is not mandatory for the SNMP agent to create rows in this table; hence, it may be necessary for the manager to create rows in this table before any results can be stored. 8. If the manager attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the response to the SNMP SET PDU will contain the error noCreation(11). 9. If the SNMP agent attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the attribute adsl2LineCmndConfLdsfFailReason will indicate the reason for the failure. The failure reason will be either tableFull(10) or noResources(11). 10. An example of use of this table is as follows: Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes, and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : Due to a low memory condition, a row in the : adsl2SCStatusTable table cannot be created at : this time. Step 5. : The reason for the failure, tableFull(10), is : indicated in the adsl2LineCmndConfLdsfFailReason : attribute. 11. Another example of use of this table is as follows : Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : The row creation is successful. Step 5. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). 12. Another example of use of this table is as follows: Step 1. : The manager creates a row in adsl2SCStatusTable : for a particular ADSL2 line. Step 2. : The DELT is started on the above-mentioned : line by setting the adsl2LineCmndConfLdsf from : inhibit to force. Step 3. : The DELT completes, and valid data is : available. Step 4. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). The indexes of this table are ifIndex and adsl2SCStatusDirection. \"",
    "::=",
    "{",
    "hwadsl2Status",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "conceptualTable",
      [
        "row",
        "Hwadsl2SCStatusEntry"
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "not-accessible"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The table hwadsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The following points apply to this table: 1. The main purpose of this table is to hold the results of a DELT. 2. This table also holds parameters obtained at line initialization time. 3. The rows in this table are volatile; that is, they are lost if the SNMP agent is rebooted. 4. Due to the large OCTET STRING attributes in this table, the worst case memory requirements for this table are very high. The manager may use the row status attribute of this table to delete rows in order to reclaim memory. 5. The manager may create rows in this table. The SNMP agent may create rows in this table. Only the manager may delete rows in this table. 6. The maximum number of rows allowable in this table is indicated by the scalar attribute adsl2ScalarSCMaxInterfaces. The number of rows available in this table is indicated by the scalar attribute adsl2ScalarSCAvailInterfaces. 7. The SNMP agent is permitted to create rows in this table when a DELT completes successfully or when line initialization occurs. It is not mandatory for the SNMP agent to create rows in this table; hence, it may be necessary for the manager to create rows in this table before any results can be stored. 8. If the manager attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the response to the SNMP SET PDU will contain the error noCreation(11). 9. If the SNMP agent attempts to create a row in this table and there are no more rows available, the creation attempt will fail, and the attribute adsl2LineCmndConfLdsfFailReason will indicate the reason for the failure. The failure reason will be either tableFull(10) or noResources(11). 10. An example of use of this table is as follows: Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes, and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : Due to a low memory condition, a row in the : adsl2SCStatusTable table cannot be created at : this time. Step 5. : The reason for the failure, tableFull(10), is : indicated in the adsl2LineCmndConfLdsfFailReason : attribute. 11. Another example of use of this table is as follows : Step 1. : The DELT is started by setting the : adsl2LineCmndConfLdsf from inhibit to force. Step 2. : The DELT completes and valid data is : available. Step 3. : The row in the adsl2SCStatusTable where the : results will be stored does not yet exist so : the SNMP agent attempts to create the row. Step 4. : The row creation is successful. Step 5. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). 12. Another example of use of this table is as follows: Step 1. : The manager creates a row in adsl2SCStatusTable : for a particular ADSL2 line. Step 2. : The DELT is started on the above-mentioned : line by setting the adsl2LineCmndConfLdsf from : inhibit to force. Step 3. : The DELT completes, and valid data is : available. Step 4. : The value of the attribute : adsl2LineCmndConfLdsfFailReasonreason is set : to success(2). The indexes of this table are ifIndex and adsl2SCStatusDirection."
    ],
    null,
    null,
    null,
    null
  ]
}
  • Huawei MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

    Vendor MIB copy from the Observium Community archive. Huawei support.

    Module: HUAWEI-NGADSL-LINE-MIB

    See published definition above

    Module imports
    {'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime'], 'HUAWEI-MIB': ['huaweiUtility'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'Gauge32', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'Integer32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'ADSL2-LINE-MIB': ['adsl2', 'adsl2PMLCurrUnit', 'adsl2PMLHist15MUnit', 'adsl2PMLHist15MInterval', 'adsl2PMLHistInit15MInterval', 'adsl2PMLHist1DUnit', 'adsl2PMLHist1DInterval', 'adsl2PMLHistinit1DInterval', 'adsl2ChannelStatusEntry', 'adsl2ChAlarmConfProfileEntry', 'adsl2PMLineCurrEntry', 'adsl2PMLineCurrInitEntry', 'adsl2PMChCurrEntry', 'adsl2LineConfProfEntry', 'adsl2SCStatusEntry', 'adsl2LineEntry', 'adsl2ChStatusUnit', 'adsl2PMChCurrUnit', 'adsl2PMChHist15MUnit', 'adsl2PMChHist15MInterval', 'adsl2PMChHist1DUnit', 'adsl2PMChHist1DInterval', 'adsl2LConfProfProfileName', 'adsl2SCStatusDirection', 'adsl2LineAlarmConfProfileName', 'adsl2ChAlarmConfProfileName', 'adsl2ChConfProfProfileName', 'adsl2LineCmndConfLdsfFailReason', 'adsl2ChStatusActDataRate', 'adsl2ChStatusChannelNum'], 'HUAWEI-DEVICE-MIB': ['hwFrameIndex', 'hwSlotIndex', 'hwPortIndex', 'hwPortOperStatus', 'hwPortPrimaryStatus', 'hwPortSecondaryStatus'], 'HC-PerfHist-TC-MIB': ['HCPerfIntervalThreshold', 'HCPerfTimeElapsed']}
    · Download HUAWEI-NGADSL-LINE-MIB

    Related source files and packages:

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2011)

Lwu Zhao

Direct children (1)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2011.6.138.1.2.2.1 hwadsl2SCStatusEntry22

Siblings (1)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2011.6.138.1.2.1 hwadsl2ChannelStatusTable111