Status in source: current.
Names: hwadsl2LConfProfDpboEsEL
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwadsl2LConfProfDpboEsEL",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"511",
")",
"UNITS",
[
"literal",
"22302e35644222"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. Unit: 0.5dB \"",
"REFERENCE",
"\"ITU-T G.997.1(200604), paragraph 7.3.1.2.13\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"hwadsl2LineConfProfEntry",
"13",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
511
]
]
]
],
[
"UNITS",
"0.5dB"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spectrally shaped downstream power back-off depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. DPBOESEL shall be coded as an unsigned integer representing an electrical length from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. All values in the range are valid.If DPBOESEL is set to zero, the DPBO in this section shall be disabled. Unit: 0.5dB"
],
[
"REFERENCE",
"ITU-T G.997.1(200604), paragraph 7.3.1.2.13"
],
null,
null,
[
"DEFVAL",
0
]
]
}
- Huawei MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Huawei support.
Module: HUAWEI-NGADSL-LINE-MIB
See published definition above
Module imports
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime'], 'HUAWEI-MIB': ['huaweiUtility'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'Gauge32', 'OBJECT-TYPE', 'Unsigned32', 'Counter32', 'Integer32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'ADSL2-LINE-MIB': ['adsl2', 'adsl2PMLCurrUnit', 'adsl2PMLHist15MUnit', 'adsl2PMLHist15MInterval', 'adsl2PMLHistInit15MInterval', 'adsl2PMLHist1DUnit', 'adsl2PMLHist1DInterval', 'adsl2PMLHistinit1DInterval', 'adsl2ChannelStatusEntry', 'adsl2ChAlarmConfProfileEntry', 'adsl2PMLineCurrEntry', 'adsl2PMLineCurrInitEntry', 'adsl2PMChCurrEntry', 'adsl2LineConfProfEntry', 'adsl2SCStatusEntry', 'adsl2LineEntry', 'adsl2ChStatusUnit', 'adsl2PMChCurrUnit', 'adsl2PMChHist15MUnit', 'adsl2PMChHist15MInterval', 'adsl2PMChHist1DUnit', 'adsl2PMChHist1DInterval', 'adsl2LConfProfProfileName', 'adsl2SCStatusDirection', 'adsl2LineAlarmConfProfileName', 'adsl2ChAlarmConfProfileName', 'adsl2ChConfProfProfileName', 'adsl2LineCmndConfLdsfFailReason', 'adsl2ChStatusActDataRate', 'adsl2ChStatusChannelNum'], 'HUAWEI-DEVICE-MIB': ['hwFrameIndex', 'hwSlotIndex', 'hwPortIndex', 'hwPortOperStatus', 'hwPortPrimaryStatus', 'hwPortSecondaryStatus'], 'HC-PerfHist-TC-MIB': ['HCPerfIntervalThreshold', 'HCPerfTimeElapsed']}
· Download HUAWEI-NGADSL-LINE-MIB
Related source files and packages: