Status in source: current.
Names: hwVOPDataRateConfProfDsDataRate
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hwVOPDataRateConfProfDsDataRate",
"OBJECT-TYPE",
"SYNTAX",
"Gauge32",
"(",
"0",
".",
".",
"500000000",
")",
"UNITS",
[
"literal",
"226269742f7322"
],
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"If retransmission is not used in a given transmit direction, This parameter is a threshold on the net data rate downshift achieved over one or more bearer channel data rate adaptations. A downshift rate change alarm (event) is triggered when the actual data rate is below the data rate at the last entry into showtime by more than the threshold. The data rate threshold is coded in bit/s. Unit: bit/s. \"",
"REFERENCE",
"\"ITU-T G.997.1, paragraph #7.3.2.8.2 (Data rate threshold downshift)\"",
"::=",
"{",
"hwVOPDataRateConfProfEntry",
"10",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Gauge32",
[
"integerSubType",
[
[
0,
500000000
]
]
]
],
[
"UNITS",
"bit/s"
],
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If retransmission is not used in a given transmit direction, This parameter is a threshold on the net data rate downshift achieved over one or more bearer channel data rate adaptations. A downshift rate change alarm (event) is triggered when the actual data rate is below the data rate at the last entry into showtime by more than the threshold. The data rate threshold is coded in bit/s. Unit: bit/s."
],
[
"REFERENCE",
"ITU-T G.997.1, paragraph #7.3.2.8.2 (Data rate threshold downshift)"
],
null,
null,
null
]
}