OID reference
1.3.6.1.4.1.20540.2.1.2.3.1.2
Whether the specified firmware location is the default for booting a normal switch. If the switch has failed to boot and has fallen back to the alternate image, this will remain the same. To attempt to boot the switch into the default image again, this must be set explicitly.
Identification
{1 3 6 1 4 1 20540 2 1 2 3 1 2}
| Value | Name |
|---|---|
| 1 | yes |
| 2 | no |
| 3 | unknown |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In SIXNET-MIB, the row index firmwareIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.20540.2.1.2.3.1.2.<firmwareIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.20540.2.1.2.3.1.2
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
firmwareDefault OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2),
unknown(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the specified firmware location is the default for booting a
normal switch. If the switch has failed to boot and has fallen back to
the alternate image, this will remain the same. To attempt to boot the
switch into the default image again, this must be set explicitly."
::= { firmwareEntry 2 }firmwareDefault OBJECT-TYPE
SYNTAX INTEGER {
yes(1),
no(2),
unknown(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether the specified firmware location is the default for booting a
normal switch. If the switch has failed to boot and has fallen back to
the alternate image, this will remain the same. To attempt to boot the
switch into the default image again, this must be set explicitly."
::= { firmwareEntry 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Whether the specified firmware location is the default for booting a normal switch. If the switch has failed to boot and has fallen back to the alternate image, this will remain the same. To attempt to boot the switch into the default image again, this must be set explicitly.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: firmwareDefault
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"firmwareDefault",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"yes",
"(",
"1",
")",
",",
"no",
"(",
"2",
")",
",",
"unknown",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Whether the specified firmware location is the default for booting a normal switch. If the switch has failed to boot and has fallen back to the alternate image, this will remain the same. To attempt to boot the switch into the default image again, this must be set explicitly.\"",
"::=",
"{",
"firmwareEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"yes",
1
],
[
"no",
2
],
[
"unknown",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Whether the specified firmware location is the default for booting a normal switch. If the switch has failed to boot and has fallen back to the alternate image, this will remain the same. To attempt to boot the switch into the default image again, this must be set explicitly."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: SIXNET-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'RowStatus', 'TruthValue'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPortEntry', 'MacAddress'], 'SNMPv2-SMI': ['Integer32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'TimeTicks', 'Counter32', 'Unsigned32', 'IpAddress', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Vendor MIB copy from the Netdisco archive.
Module: SIXNET-MIB
See published definition above
{'IF-MIB': ['ifIndex', 'InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'RowStatus', 'TruthValue'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPortEntry', 'MacAddress'], 'SNMPv2-SMI': ['Integer32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'TimeTicks', 'Counter32', 'Unsigned32', 'IpAddress', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20540.2.1.2.3.1.1 | firmwareIndex | 0 | 0 | |
| 1.3.6.1.4.1.20540.2.1.2.3.1.3 | firmwareRunning | 0 | 0 | |
| 1.3.6.1.4.1.20540.2.1.2.3.1.4 | firmwareVersion | 0 | 0 | |
| 1.3.6.1.4.1.20540.2.1.2.3.1.5 | firmwareHealth | 0 | 0 |