OID reference
1.3.6.1.4.1.207.8.33.10.3.4.1.4
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
Identification
{1 3 6 1 4 1 207 8 33 10 3 4 1 4}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In AtiL2-MIB, the row index consists of these components in order:
atiL2BrTpPortLanId (INTEGER): one numeric subidentifier for the non-negative value.atiL2BrTpPort (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.207.8.33.10.3.4.1.4.<atiL2BrTpPortLanId>.<atiL2BrTpPort>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.207.8.33.10.3.4.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
atiL2BrTpPortInFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { atiL2BrTpPortEntry 4 }atiL2BrTpPortInFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames that have been received by
this port from its segment. Note that a frame
received on the interface corresponding to this
port is only counted by this object if and only if
it is for a protocol being processed by the local
bridging function, including bridge management
frames."
REFERENCE
"IEEE 802.1D-1990: Section 6.6.1.1.3"
::= { atiL2BrTpPortEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: atiL2BrTpPortInFrames
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"atiL2BrTpPortInFrames",
"OBJECT-TYPE",
"SYNTAX",
"Counter",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames.\"",
"REFERENCE",
"\"IEEE 802.1D-1990: Section 6.6.1.1.3\"",
"::=",
"{",
"atiL2BrTpPortEntry",
"4",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function, including bridge management frames."
],
[
"REFERENCE",
"IEEE 802.1D-1990: Section 6.6.1.1.3"
],
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: AtiL2-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: AtiL2-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.33.10.3.4.1.1 | atiL2BrTpPortLanId | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.10.3.4.1.2 | atiL2BrTpPort | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.10.3.4.1.3 | atiL2BrTpPortMaxInfo | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.10.3.4.1.5 | atiL2BrTpPortOutFrames | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.10.3.4.1.6 | atiL2BrTpPortInDiscards | 0 | 0 |